提交 c742b31c 编写于 作者: M Martin Schwidefsky

[PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID

The extract cpu time instruction (ectg) instruction allows the user
process to get the current thread cputime without calling into the
kernel. The code that uses the instruction needs to switch to the
access registers mode to get access to the per-cpu info page that
contains the two base values that are needed to calculate the current
cputime from the CPU timer with the ectg instruction.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
上级 9cfb9b3c
......@@ -106,8 +106,10 @@
#define __LC_IPLDEV 0xDB8
#define __LC_CURRENT 0xDD8
#define __LC_INT_CLOCK 0xDE8
#define __LC_VDSO_PER_CPU 0xE38
#endif /* __s390x__ */
#define __LC_PASTE 0xE40
#define __LC_PANIC_MAGIC 0xE00
#ifndef __s390x__
......@@ -381,7 +383,12 @@ struct _lowcore
/* whether the kernel died with panic() or not */
__u32 panic_magic; /* 0xe00 */
__u8 pad13[0x11b8-0xe04]; /* 0xe04 */
/* Per cpu primary space access list */
__u8 pad_0xe04[0xe3c-0xe04]; /* 0xe04 */
__u32 vdso_per_cpu_data; /* 0xe3c */
__u32 paste[16]; /* 0xe40 */
__u8 pad13[0x11b8-0xe80]; /* 0xe80 */
/* 64 bit extparam used for pfault, diag 250 etc */
__u64 ext_params2; /* 0x11B8 */
......
......@@ -12,9 +12,9 @@
#ifndef __ASSEMBLY__
/*
* Note about this structure:
* Note about the vdso_data and vdso_per_cpu_data structures:
*
* NEVER USE THIS IN USERSPACE CODE DIRECTLY. The layout of this
* NEVER USE THEM IN USERSPACE CODE DIRECTLY. The layout of the
* structure is supposed to be known only to the function in the vdso
* itself and may change without notice.
*/
......@@ -28,10 +28,21 @@ struct vdso_data {
__u64 wtom_clock_nsec; /* 0x28 */
__u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */
__u32 tz_dsttime; /* Type of dst correction 0x34 */
__u32 ectg_available;
};
struct vdso_per_cpu_data {
__u64 ectg_timer_base;
__u64 ectg_user_time;
};
extern struct vdso_data *vdso_data;
#ifdef CONFIG_64BIT
int vdso_alloc_per_cpu(int cpu, struct _lowcore *lowcore);
void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
......
......@@ -48,6 +48,11 @@ int main(void)
DEFINE(__VDSO_WTOM_SEC, offsetof(struct vdso_data, wtom_clock_sec));
DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
DEFINE(__VDSO_ECTG_BASE,
offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER,
offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
......
......@@ -177,8 +177,11 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
.if !\sync
ni \psworg+1,0xfd # clear wait state bit
.endif
lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r13,SP_R0(%r15) # load gprs 0-13 of user
stpt __LC_EXIT_TIMER
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
lmg %r14,%r15,SP_R14(%r15) # load grps 14-15 of user
lpswe \psworg # back to caller
.endm
......@@ -980,23 +983,23 @@ cleanup_sysc_return:
cleanup_sysc_leave:
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn)
je 2f
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
je 3f
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn+8)
je 2f
mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
jhe 0f
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
0: mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
cghi %r12,__LC_MCK_OLD_PSW
jne 0f
jne 1f
mvc __LC_SAVE_AREA+64(32),SP_R12(%r15)
j 1f
0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
1: lmg %r0,%r11,SP_R0(%r15)
j 2f
1: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
2: lmg %r0,%r11,SP_R0(%r15)
lg %r15,SP_R15(%r15)
2: la %r12,__LC_RETURN_PSW
3: la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave_insn:
.quad sysc_done - 4
.quad sysc_done - 8
.quad sysc_done - 16
cleanup_io_return:
mvc __LC_RETURN_PSW(8),0(%r12)
......@@ -1006,23 +1009,23 @@ cleanup_io_return:
cleanup_io_leave:
clc 8(8,%r12),BASED(cleanup_io_leave_insn)
je 2f
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
je 3f
clc 8(8,%r12),BASED(cleanup_io_leave_insn+8)
je 2f
mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
jhe 0f
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
0: mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
cghi %r12,__LC_MCK_OLD_PSW
jne 0f
jne 1f
mvc __LC_SAVE_AREA+64(32),SP_R12(%r15)
j 1f
0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
1: lmg %r0,%r11,SP_R0(%r15)
j 2f
1: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
2: lmg %r0,%r11,SP_R0(%r15)
lg %r15,SP_R15(%r15)
2: la %r12,__LC_RETURN_PSW
3: la %r12,__LC_RETURN_PSW
br %r14
cleanup_io_leave_insn:
.quad io_done - 4
.quad io_done - 8
.quad io_done - 16
/*
* Integer constants
......
......@@ -87,6 +87,8 @@ startup_continue:
lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
lghi %r0,__LC_PASTE
stg %r0,__LC_VDSO_PER_CPU
#
# Setup stack
#
......
......@@ -427,6 +427,8 @@ setup_lowcore(void)
/* enable extended save area */
__ctl_set_bit(14, 29);
}
#else
lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
#endif
set_prefix((u32)(unsigned long) lc);
}
......
......@@ -47,6 +47,7 @@
#include <asm/lowcore.h>
#include <asm/sclp.h>
#include <asm/cpu.h>
#include <asm/vdso.h>
#include "entry.h"
/*
......@@ -506,6 +507,9 @@ static int __cpuinit smp_alloc_lowcore(int cpu)
goto out;
lowcore->extended_save_area_addr = (u32) save_area;
}
#else
if (vdso_alloc_per_cpu(cpu, lowcore))
goto out;
#endif
lowcore_ptr[cpu] = lowcore;
return 0;
......@@ -528,6 +532,8 @@ static void smp_free_lowcore(int cpu)
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
free_page((unsigned long) lowcore->extended_save_area_addr);
#else
vdso_free_per_cpu(cpu, lowcore);
#endif
free_page(lowcore->panic_stack - PAGE_SIZE);
free_pages(lowcore->async_stack - ASYNC_SIZE, ASYNC_ORDER);
......@@ -670,6 +676,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order);
panic_stack = __get_free_page(GFP_KERNEL);
async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
BUG_ON(!lowcore || !panic_stack || !async_stack);
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
save_area = get_zeroed_page(GFP_KERNEL);
......@@ -683,6 +690,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
lowcore->extended_save_area_addr = (u32) save_area;
#else
BUG_ON(vdso_alloc_per_cpu(smp_processor_id(), lowcore));
#endif
set_prefix((u32)(unsigned long) lowcore);
local_mcck_enable();
......
......@@ -31,9 +31,6 @@
#include <asm/sections.h>
#include <asm/vdso.h>
/* Max supported size for symbol names */
#define MAX_SYMNAME 64
#if defined(CONFIG_32BIT) || defined(CONFIG_COMPAT)
extern char vdso32_start, vdso32_end;
static void *vdso32_kbase = &vdso32_start;
......@@ -70,6 +67,119 @@ static union {
} vdso_data_store __attribute__((__section__(".data.page_aligned")));
struct vdso_data *vdso_data = &vdso_data_store.data;
/*
* Setup vdso data page.
*/
static void vdso_init_data(struct vdso_data *vd)
{
unsigned int facility_list;
facility_list = stfl();
vd->ectg_available = switch_amode && (facility_list & 1);
}
#ifdef CONFIG_64BIT
/*
* Setup per cpu vdso data page.
*/
static void vdso_init_per_cpu_data(int cpu, struct vdso_per_cpu_data *vpcd)
{
}
/*
* Allocate/free per cpu vdso data.
*/
#ifdef CONFIG_64BIT
#define SEGMENT_ORDER 2
#else
#define SEGMENT_ORDER 1
#endif
int vdso_alloc_per_cpu(int cpu, struct _lowcore *lowcore)
{
unsigned long segment_table, page_table, page_frame;
u32 *psal, *aste;
int i;
lowcore->vdso_per_cpu_data = __LC_PASTE;
if (!switch_amode || !vdso_enabled)
return 0;
segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
page_table = get_zeroed_page(GFP_KERNEL | GFP_DMA);
page_frame = get_zeroed_page(GFP_KERNEL);
if (!segment_table || !page_table || !page_frame)
goto out;
clear_table((unsigned long *) segment_table, _SEGMENT_ENTRY_EMPTY,
PAGE_SIZE << SEGMENT_ORDER);
clear_table((unsigned long *) page_table, _PAGE_TYPE_EMPTY,
256*sizeof(unsigned long));
*(unsigned long *) segment_table = _SEGMENT_ENTRY + page_table;
*(unsigned long *) page_table = _PAGE_RO + page_frame;
psal = (u32 *) (page_table + 256*sizeof(unsigned long));
aste = psal + 32;
for (i = 4; i < 32; i += 4)
psal[i] = 0x80000000;
lowcore->paste[4] = (u32)(addr_t) psal;
psal[0] = 0x20000000;
psal[2] = (u32)(addr_t) aste;
*(unsigned long *) (aste + 2) = segment_table +
_ASCE_TABLE_LENGTH + _ASCE_USER_BITS + _ASCE_TYPE_SEGMENT;
aste[4] = (u32)(addr_t) psal;
lowcore->vdso_per_cpu_data = page_frame;
vdso_init_per_cpu_data(cpu, (struct vdso_per_cpu_data *) page_frame);
return 0;
out:
free_page(page_frame);
free_page(page_table);
free_pages(segment_table, SEGMENT_ORDER);
return -ENOMEM;
}
#ifdef CONFIG_HOTPLUG_CPU
void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore)
{
unsigned long segment_table, page_table, page_frame;
u32 *psal, *aste;
if (!switch_amode || !vdso_enabled)
return;
psal = (u32 *)(addr_t) lowcore->paste[4];
aste = (u32 *)(addr_t) psal[2];
segment_table = *(unsigned long *)(aste + 2) & PAGE_MASK;
page_table = *(unsigned long *) segment_table;
page_frame = *(unsigned long *) page_table;
free_page(page_frame);
free_page(page_table);
free_pages(segment_table, SEGMENT_ORDER);
}
#endif /* CONFIG_HOTPLUG_CPU */
static void __vdso_init_cr5(void *dummy)
{
unsigned long cr5;
cr5 = offsetof(struct _lowcore, paste);
__ctl_load(cr5, 5, 5);
}
static void vdso_init_cr5(void)
{
if (switch_amode && vdso_enabled)
on_each_cpu(__vdso_init_cr5, NULL, 1);
}
#endif /* CONFIG_64BIT */
/*
* This is called from binfmt_elf, we create the special vma for the
* vDSO and insert it into the mm struct tree
......@@ -172,6 +282,9 @@ static int __init vdso_init(void)
{
int i;
if (!vdso_enabled)
return 0;
vdso_init_data(vdso_data);
#if defined(CONFIG_32BIT) || defined(CONFIG_COMPAT)
/* Calculate the size of the 32 bit vDSO */
vdso32_pages = ((&vdso32_end - &vdso32_start
......@@ -208,6 +321,10 @@ static int __init vdso_init(void)
}
vdso64_pagelist[vdso64_pages - 1] = virt_to_page(vdso_data);
vdso64_pagelist[vdso64_pages] = NULL;
#ifndef CONFIG_SMP
BUG_ON(vdso_alloc_per_cpu(0, S390_lowcore));
#endif
vdso_init_cr5();
#endif /* CONFIG_64BIT */
get_page(virt_to_page(vdso_data));
......
......@@ -22,7 +22,12 @@ __kernel_clock_getres:
cghi %r2,CLOCK_REALTIME
je 0f
cghi %r2,CLOCK_MONOTONIC
je 0f
cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
jne 2f
larl %r5,_vdso_data
icm %r0,15,__LC_ECTG_OK(%r5)
jz 2f
0: ltgr %r3,%r3
jz 1f /* res == NULL */
larl %r1,3f
......
......@@ -22,8 +22,10 @@ __kernel_clock_gettime:
larl %r5,_vdso_data
cghi %r2,CLOCK_REALTIME
je 4f
cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
je 9f
cghi %r2,CLOCK_MONOTONIC
jne 9f
jne 12f
/* CLOCK_MONOTONIC */
ltgr %r3,%r3
......@@ -42,7 +44,7 @@ __kernel_clock_gettime:
alg %r0,__VDSO_WTOM_SEC(%r5)
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 0b
larl %r5,10f
larl %r5,13f
1: clg %r1,0(%r5)
jl 2f
slg %r1,0(%r5)
......@@ -68,7 +70,7 @@ __kernel_clock_gettime:
lg %r0,__VDSO_XTIME_SEC(%r5)
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 5b
larl %r5,10f
larl %r5,13f
6: clg %r1,0(%r5)
jl 7f
slg %r1,0(%r5)
......@@ -79,11 +81,38 @@ __kernel_clock_gettime:
8: lghi %r2,0
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
9: icm %r0,15,__VDSO_ECTG_OK(%r5)
jz 12f
ear %r2,%a4
llilh %r4,0x0100
sar %a4,%r4
lghi %r4,0
sacf 512 /* Magic ectg instruction */
.insn ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
sacf 0
sar %a4,%r2
algr %r1,%r0 /* r1 = cputime as TOD value */
mghi %r1,1000 /* convert to nanoseconds */
srlg %r1,%r1,12 /* r1 = cputime in nanosec */
lgr %r4,%r1
larl %r5,13f
srlg %r1,%r1,9 /* divide by 1000000000 */
mlg %r0,8(%r5)
srlg %r0,%r0,11 /* r0 = tv_sec */
stg %r0,0(%r3)
msg %r0,0(%r5) /* calculate tv_nsec */
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
br %r14
/* Fallback to system call */
9: lghi %r1,__NR_clock_gettime
12: lghi %r1,__NR_clock_gettime
svc 0
br %r14
10: .quad 1000000000
13: .quad 1000000000
14: .quad 19342813113834067
.cfi_endproc
.size __kernel_clock_gettime,.-__kernel_clock_gettime
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册