Fundamental model of the current Linux kernel is to lazily init and
restore FPU instead of restoring the task state during context switch.
This changes that fundamental lazy model to the non-lazy model for
the processors supporting xsave feature.

Reasons driving this model change are:

i. Newer processors support optimized state save/restore using xsaveopt and
xrstor by tracking the INIT state and MODIFIED state during context-switch.
This is faster than modifying the cr0.TS bit which has serializing semantics.

ii. Newer glibc versions use SSE for some of the optimized copy/clear routines.
With certain workloads (like boot, kernel-compilation etc), application
completes its work with in the first 5 task switches, thus taking upto 5 #DNA
traps with the kernel not getting a chance to apply the above mentioned
pre-load heuristic.

iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit
and thus will not work correctly in the presence of lazy restore. Non-lazy
state restore is needed for enabling such features.

Some data on a two socket SNB system:
 * Saved 20K DNA exceptions during boot on a two socket SNB system.
 * Saved 50K DNA exceptions during kernel-compilation workload.
 * Improved throughput of the AVX based checksumming function inside the
   kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts
   pair.

Also now kernel_fpu_begin/end() relies on the patched
alternative instructions. So move check_fpu() which uses the
kernel_fpu_begin/end() after alternative_instructions().
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com
Merge 32-bit boot fix from,
Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com
Cc: Jim Kukunas <james.t.kukunas@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Rename checking_wrmsrl() to wrmsrl_safe(), to match the naming
convention used by all the other MSR access functions/macros.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use a more current logging style:

 - Bare printks should have a KERN_<LEVEL> for consistency's sake
 - Add pr_fmt where appropriate
 - Neaten some macro definitions
 - Convert some Ok output to OK
 - Use "%s: ", __func__ in pr_fmt for summit
 - Convert some printks to pr_<level>

Message output is not identical in all cases.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Historical prepare_to_copy() is mostly a no-op, duplicated for majority of
the architectures and the rest following the x86 model of flushing the extended
register state like fpu there.

Remove it and use the arch_dup_task_struct() instead.
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.comAcked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Since percpu_xxx() serial functions are duplicated with this_cpu_xxx().
Removing percpu_xxx() definition and replacing them by this_cpu_xxx()
in code. There is no function change in this patch, just preparation for
later percpu_xxx serial function removing.

On x86 machine the this_cpu_xxx() serial functions are same as
__this_cpu_xxx() without no unnecessary premmpt enable/disable.

Thanks for Stephen Rothwell, he found and fixed a i386 build error in
the patch.

Also thanks for Andrew Morton, he kept updating the patchset in Linus'
tree.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Acked-by: NChristoph Lameter <cl@gentwo.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Commit ce7e5d2d ("x86: fix broken TASK_SIZE for ia32_aout") breaks
kernel builds when "CONFIG_IA32_AOUT=m" with

  ERROR: "set_personality_ia32" [arch/x86/ia32/ia32_aout.ko] undefined!
  make[1]: *** [__modpost] Error 1

The entry point needs to be exported.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Acked-by: NAl Viro <viro@zeniv.linux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Disintegrate asm/system.h for X86.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
cc: x86@kernel.org

Both functions are mostly identical.
The differences are:

- x86_32's cpu_idle() makes use of check_pgt_cache(), which is a
  nop on both x86_32 and x86_64.

- x86_64's cpu_idle() uses enter/__exit_idle/(), on x86_32 these
  function are a nop.

- In contrast to x86_32, x86_64 calls rcu_idle_enter/exit() in
  the innermost loop because idle notifications need RCU.
  Calling these function on x86_32 also in the innermost loop
  does not hurt.

So we can merge both functions.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: paulmck@linux.vnet.ibm.com
Cc: josh@joshtriplett.org
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1332709204-22496-1-git-send-email-richard@nod.atSigned-off-by: NIngo Molnar <mingo@kernel.org>

Coccinelle based conversion.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

task->thread.usersp is unusable immediately after a binary is exec()'d
until it undergoes a context switch cycle. The start_thread() function
called during execve() saves the stack pointer into pt_regs and into
old_rsp, but fails to record it into task->thread.usersp.

Because of this, KSTK_ESP(task) returns an incorrect value for a
64-bit program until the task is switched out and back in since
switch_to swaps %rsp values in and out into task->thread.usersp.
Signed-off-by: NSiddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Link: http://lkml.kernel.org/r/1330273075-2949-1-git-send-email-siddhesh.poyarekar@gmail.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Commits bb212724 and d1a797f3 both added a call to
clear_thread_flag(TIF_X32) under set_personality_64bit() - only one is
needed.
Signed-off-by: NBobby Powers <bobbypowers@gmail.com>
Link: http://lkml.kernel.org/r/1330228774-24223-1-git-send-email-bobbypowers@gmail.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

If a process has a non-x32 ia32 personality and changes to x32, the
process would keep its TS_COMPAT flag. x32 uses the presence of the
x32 flag on a syscall to determine compat status, so make sure
TS_COMPAT is cleared.
Signed-off-by: NBobby Powers <bobbypowers@gmail.com>
Link: http://lkml.kernel.org/r/1330230338-25077-1-git-send-email-bobbypowers@gmail.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

While various modules include <asm/i387.h> to get access to things we
actually *intend* for them to use, most of that header file was really
pretty low-level internal stuff that we really don't want to expose to
others.

So split the header file into two: the small exported interfaces remain
in <asm/i387.h>, while the internal definitions that are only used by
core architecture code are now in <asm/fpu-internal.h>.

The guiding principle for this was to expose functions that we export to
modules, and leave them in <asm/i387.h>, while stuff that is used by
task switching or was marked GPL-only is in <asm/fpu-internal.h>.

The fpu-internal.h file could be further split up too, especially since
arch/x86/kvm/ uses some of the remaining stuff for its module.  But that
kvm usage should probably be abstracted out a bit, and at least now the
internal FPU accessor functions are much more contained.  Even if it
isn't perhaps as contained as it _could_ be.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202211340330.5354@i5.linux-foundation.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Allow an x32 process to be started.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>

An x32 process is *almost* the same thing as a 64-bit process with a
32-bit address limit, but there are a few minor differences -- in
particular core dumps are 32 bits and signal handling is different.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Factor out IA32 (compatibility instruction set) from 32-bit address
space in the thread_info flags; this is a precondition patch for x32
support.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org

This makes us recognize when we try to restore FPU state that matches
what we already have in the FPU on this CPU, and avoids the restore
entirely if so.

To do this, we add two new data fields:

 - a percpu 'fpu_owner_task' variable that gets written any time we
   update the "has_fpu" field, and thus acts as a kind of back-pointer
   to the task that owns the CPU.  The exception is when we save the FPU
   state as part of a context switch - if the save can keep the FPU
   state around, we leave the 'fpu_owner_task' variable pointing at the
   task whose FP state still remains on the CPU.

 - a per-thread 'last_cpu' field, that indicates which CPU that thread
   used its FPU on last.  We update this on every context switch
   (writing an invalid CPU number if the last context switch didn't
   leave the FPU in a lazily usable state), so we know that *that*
   thread has done nothing else with the FPU since.

These two fields together can be used when next switching back to the
task to see if the CPU still matches: if 'fpu_owner_task' matches the
task we are switching to, we know that no other task (or kernel FPU
usage) touched the FPU on this CPU in the meantime, and if the current
CPU number matches the 'last_cpu' field, we know that this thread did no
other FP work on any other CPU, so the FPU state on the CPU must match
what was saved on last context switch.

In that case, we can avoid the 'f[x]rstor' entirely, and just clear the
CR0.TS bit.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes sure we clear the FPU usage counter for newly created tasks,
just so that we start off in a known state (for example, don't try to
preload the FPU state on the first task switch etc).

It also fixes a thinko in when we increment the fpu_counter at task
switch time, introduced by commit 34ddc81a ("i387: re-introduce FPU
state preloading at context switch time").  We should increment the
*new* task fpu_counter, not the old task, and only if we decide to use
that state (whether lazily or preloaded).
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After all the FPU state cleanups and finally finding the problem that
caused all our FPU save/restore problems, this re-introduces the
preloading of FPU state that was removed in commit b3b0870e ("i387:
do not preload FPU state at task switch time").

However, instead of simply reverting the removal, this reimplements
preloading with several fixes, most notably

 - properly abstracted as a true FPU state switch, rather than as
   open-coded save and restore with various hacks.

   In particular, implementing it as a proper FPU state switch allows us
   to optimize the CR0.TS flag accesses: there is no reason to set the
   TS bit only to then almost immediately clear it again.  CR0 accesses
   are quite slow and expensive, don't flip the bit back and forth for
   no good reason.

 - Make sure that the same model works for both x86-32 and x86-64, so
   that there are no gratuitous differences between the two due to the
   way they save and restore segment state differently due to
   architectural differences that really don't matter to the FPU state.

 - Avoid exposing the "preload" state to the context switch routines,
   and in particular allow the concept of lazy state restore: if nothing
   else has used the FPU in the meantime, and the process is still on
   the same CPU, we can avoid restoring state from memory entirely, just
   re-expose the state that is still in the FPU unit.

   That optimized lazy restore isn't actually implemented here, but the
   infrastructure is set up for it.  Of course, older CPU's that use
   'fnsave' to save the state cannot take advantage of this, since the
   state saving also trashes the state.

In other words, there is now an actual _design_ to the FPU state saving,
rather than just random historical baggage.  Hopefully it's easier to
follow as a result.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is
pending.  In order to not leak FIP state from one process to another, we
need to do a floating point load after the fxsave of the old process,
and before the fxrstor of the new FPU state.  That resets the state to
the (uninteresting) kernel load, rather than some potentially sensitive
user information.

We used to do this directly after the FPU state save, but that is
actually very inconvenient, since it

 (a) corrupts what is potentially perfectly good FPU state that we might
     want to lazy avoid restoring later and

 (b) on x86-64 it resulted in a very annoying ordering constraint, where
     "__unlazy_fpu()" in the task switch needs to be delayed until after
     the DS segment has been reloaded just to get the new DS value.

Coupling it to the fxrstor instead of the fxsave automatically avoids
both of these issues, and also ensures that we only do it when actually
necessary (the FP state after a save may never actually get used).  It's
simply a much more natural place for the leaked state cleanup.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Yes, taking the trap to re-load the FPU/MMX state is expensive, but so
is spending several days looking for a bug in the state save/restore
code.  And the preload code has some rather subtle interactions with
both paravirtualization support and segment state restore, so it's not
nearly as simple as it should be.

Also, now that we no longer necessarily depend on a single bit (ie
TS_USEDFPU) for keeping track of the state of the FPU, we migth be able
to do better.  If we are really switching between two processes that
keep touching the FP state, save/restore is inevitable, but in the case
of having one process that does most of the FPU usage, we may actually
be able to do much better than the preloading.

In particular, we may be able to keep track of which CPU the process ran
on last, and also per CPU keep track of which process' FP state that CPU
has.  For modern CPU's that don't destroy the FPU contents on save time,
that would allow us to do a lazy restore by just re-enabling the
existing FPU state - with no restore cost at all!
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The idle notifier, called by enter_idle(), enters into rcu read
side critical section but at that time we already switched into
the RCU-idle window (rcu_idle_enter() has been called). And it's
illegal to use rcu_read_lock() in that state.

This results in rcu reporting its bad mood:

[    1.275635] WARNING: at include/linux/rcupdate.h:194 __atomic_notifier_call_chain+0xd2/0x110()
[    1.275635] Hardware name: AMD690VM-FMH
[    1.275635] Modules linked in:
[    1.275635] Pid: 0, comm: swapper Not tainted 3.0.0-rc6+ #252
[    1.275635] Call Trace:
[    1.275635]  [<ffffffff81051c8a>] warn_slowpath_common+0x7a/0xb0
[    1.275635]  [<ffffffff81051cd5>] warn_slowpath_null+0x15/0x20
[    1.275635]  [<ffffffff817d6f22>] __atomic_notifier_call_chain+0xd2/0x110
[    1.275635]  [<ffffffff817d6f71>] atomic_notifier_call_chain+0x11/0x20
[    1.275635]  [<ffffffff810018a0>] enter_idle+0x20/0x30
[    1.275635]  [<ffffffff81001995>] cpu_idle+0xa5/0x110
[    1.275635]  [<ffffffff817a7465>] rest_init+0xe5/0x140
[    1.275635]  [<ffffffff817a73c8>] ? rest_init+0x48/0x140
[    1.275635]  [<ffffffff81cc5ca3>] start_kernel+0x3d1/0x3dc
[    1.275635]  [<ffffffff81cc5321>] x86_64_start_reservations+0x131/0x135
[    1.275635]  [<ffffffff81cc5412>] x86_64_start_kernel+0xed/0xf4
[    1.275635] ---[ end trace a22d306b065d4a66 ]---

Fix this by entering rcu extended quiescent state later, just before
the CPU goes to sleep.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Link: http://lkml.kernel.org/r/1321569820.1624.275.camel@localhost.localdomainSigned-off-by: NIngo Molnar <mingo@elte.hu>

Previous patches allow the NMI subsystem to process multipe NMI events
in one NMI.  As previously discussed this can cause issues when an event
triggered another NMI but is processed in the current NMI.  This causes the
next NMI to go unprocessed and become an 'unknown' NMI.

To handle this, we first have to flag whether or not the NMI handler handled
more than one event or not.  If it did, then there exists a chance that
the next NMI might be already processed.  Once the NMI is flagged as a
candidate to be swallowed, we next look for a back-to-back NMI condition.

This is determined by looking at the %rip from pt_regs.  If it is the same
as the previous NMI, it is assumed the cpu did not have a chance to jump
back into a non-NMI context and execute code and instead handled another NMI.

If both of those conditions are true then we will swallow any unknown NMI.

There still exists a chance that we accidentally swallow a real unknown NMI,
but for now things seem better.

An optimization has also been added to the nmi notifier rountine.  Because x86
can latch up to one NMI while currently processing an NMI, we don't have to
worry about executing _all_ the handlers in a standalone NMI.  The idea is
if multiple NMIs come in, the second NMI will represent them.  For those
back-to-back NMI cases, we have the potentail to drop NMIs.  Therefore only
execute all the handlers in the second half of a detected back-to-back NMI.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317409584-23662-5-git-send-email-dzickus@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

cpuidle users should call cpuidle_call_idle() directly
rather than via (pm_idle)() function pointer.

Architecture may choose to continue using (pm_idle)(),
but cpuidle need not depend on it:

  my_arch_cpu_idle()
	...
	if(cpuidle_call_idle())
		pm_idle();

cc: Kevin Hilman <khilman@deeprootsystems.com>
cc: Paul Mundt <lethal@linux-sh.org>
cc: x86@kernel.org
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Unconditionally changing the address limit to USER_DS and not restoring
it to its old value in the error path is wrong because it prevents us
using kernel memory on repeated calls to this function.  This, in fact,
breaks the fallback of hard coded paths to the init program from being
ever successful if the first candidate fails to load.

With this patch applied switching to USER_DS is delayed until the point
of no return is reached which makes it possible to have a multi-arch
rootfs with one arch specific init binary for each of the (hard coded)
probed paths.

Since the address limit is already set to USER_DS when start_thread()
will be invoked, this redundancy can be safely removed.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch simply follows the same practice as for setting the TIF_IA32 flag.
In particular, an mm is marked as holding 32-bit tasks when a 32-bit binary is
exec'ed.  Both ELF and a.out formats are updated.
Signed-off-by: NStephen Wilson <wilsons@start.ca>
Reviewed-by: NMichel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer

Currently intel_idle and acpi_idle driver show double cpu_idle "exit idle"
events -> this patch fixes it and makes cpu_idle events throwing less complex.

It also introduces cpu_idle events for all architectures which use
the cpuidle subsystem, namely:
  - arch/arm/mach-at91/cpuidle.c
  - arch/arm/mach-davinci/cpuidle.c
  - arch/arm/mach-kirkwood/cpuidle.c
  - arch/arm/mach-omap2/cpuidle34xx.c
  - arch/drivers/acpi/processor_idle.c (for all cases, not only mwait)
  - arch/x86/kernel/process.c (did throw events before, but was a mess)
  - drivers/idle/intel_idle.c (did throw events before)

Convention should be:
Fire cpu_idle events inside the current pm_idle function (not somewhere
down the the callee tree) to keep things easy.

Current possible pm_idle functions in X86:
c1e_idle, poll_idle, cpuidle_idle_call, mwait_idle, default_idle
-> this is really easy is now.

This affects userspace:
The type field of the cpu_idle power event can now direclty get
mapped to:
/sys/devices/system/cpu/cpuX/cpuidle/stateX/{name,desc,usage,time,...}
instead of throwing very CPU/mwait specific values.
This change is not visible for the intel_idle driver.
For the acpi_idle driver it should only be visible if the vendor
misses out C-states in his BIOS.
Another (perf timechart) patch reads out cpuidle info of cpu_idle
events from:
/sys/.../cpuidle/stateX/*, then the cpuidle events are mapped
to the correct C-/cpuidle state again, even if e.g. vendors miss
out C-states in their BIOS and for example only export C1 and C3.
-> everything is fine.
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: Robert Schoene <robert.schoene@tu-dresden.de>
CC: Jean Pihet <j-pihet@ti.com>
CC: Arjan van de Ven <arjan@linux.intel.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: linux-pm@lists.linux-foundation.org
CC: linux-acpi@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-perf-users@vger.kernel.org
CC: linux-omap@vger.kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

Add these new power trace events:

 power:cpu_idle
 power:cpu_frequency
 power:machine_suspend

The old C-state/idle accounting events:
  power:power_start
  power:power_end

Have now a replacement (but we are still keeping the old
tracepoints for compatibility):

  power:cpu_idle

and
  power:power_frequency

is replaced with:
  power:cpu_frequency

power:machine_suspend is newly introduced.

Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.

the type= field got removed from both, it was never
used and the type is differed by the event type itself.

perf timechart userspace tool gets adjusted in a separate patch.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NJean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>

Consolidates code and fixes the below race for 64-bit.

commit 9fa2f37bfeb798728241cc4a19578ce6e4258f25
Author: torvalds <torvalds>
Date:   Tue Sep 2 07:37:25 2003 +0000

    Be a lot more careful about TS_USEDFPU and preemption

    We had some races where we testecd (or set) TS_USEDFPU together
    with sequences that depended on the setting (like clearing or
    setting the TS flag in %cr0) and we could be preempted in between,
    which screws up the FPU state, since preemption will itself change
    USEDFPU and the TS flag.

    This makes it a lot more explicit: the "internal" low-level FPU
    functions ("__xxxx_fpu()") all require preemption to be disabled,
    and the exported "real" functions will make sure that is the case.

    One case - in __switch_to() - was switched to the non-preempt-safe
    internal version, since the scheduler itself has already disabled
    preemption.

    BKrev: 3f5448b5WRiQuyzAlbajs3qoQjSobw
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1283563039-3466-6-git-send-email-brgerst@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Systems using the idle thread from process_32.c and process_64.c
do not generate power_end events which could be traced using
perf. This patch adds the event generation for such systems.
Signed-off-by: NRobert Schoene <robert.schoene@tu-dresden.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276515440.5441.45.camel@localhost>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently all fpu state access is through tsk->thread.xstate.  Since we wish
to generalize fpu access to non-task contexts, wrap the state in a new
'struct fpu' and convert existing access to use an fpu API.

Signal frame handlers are not converted to the API since they will remain
task context only things.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1273135546-29690-3-git-send-email-avi@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

When we do a thread switch, we clear the outgoing FS/GS base if the
corresponding selector is nonzero.  This is taken by __switch_to() as
an entry invariant; it does not verify that it is true on entry.
However, copy_thread() doesn't enforce this constraint, which can
result in inconsistent results after fork().

Make copy_thread() match the behavior of __switch_to().
Reported-and-tested-by: NSamuel Thibault <samuel.thibault@inria.fr>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4BD1E061.8030605@zytor.com>
Cc: <stable@kernel.org>

Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

05d43ed8 "x86: get rid of the insane TIF_ABI_PENDING bit" forgot about
force_personality32.  Fix.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the previous commit made it possible to do the personality
setting at the point of no return, we do just that for ELF binaries.
And suddenly all the reasons for that insane TIF_ABI_PENDING bit go
away, and we can just make SET_PERSONALITY() just do the obvious thing
for a 32-bit compat process.

Everything becomes much more straightforward this way.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using kernel_stack_pointer() allows 32-bit and 64-bit versions to
be merged.  This is more correct for 64-bit, since the old %rsp is
always saved on the stack.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
LKML-Reference: <1263397555-27695-1-git-send-email-brgerst@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Andrew Morton reported a strange looking kmemcheck warning:

  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20)
  0000000000000000310000000000000000000000000000002413000000c9ffff
   u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The
problem here is that the output comes from syslog which doesn't
show KERN_INFO log-level messages. We didn't see this before
because both of us were testing on 32-bit kernels which use the
_default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for
__show_regs() printks.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1261988819.4641.2.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>