提交 2bbb6817 编写于 作者: F Frederic Weisbecker 提交者: Paul E. McKenney

nohz: Allow rcu extended quiescent state handling seperately from tick stop

It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
上级 280f0677
......@@ -183,7 +183,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
leds_event(led_idle_start);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
......@@ -213,7 +213,7 @@ void cpu_idle(void)
}
}
leds_event(led_idle_end);
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -34,10 +34,10 @@ void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched())
cpu_idle_sleep();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -88,10 +88,10 @@ void cpu_idle(void)
#endif
if (!idle)
idle = default_idle;
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched())
idle();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -103,10 +103,10 @@ void cpu_idle(void)
if (!idle)
idle = default_idle;
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched())
idle();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
......
......@@ -56,7 +56,7 @@ void __noreturn cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched() && cpu_online(cpu)) {
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
......@@ -77,7 +77,7 @@ void __noreturn cpu_idle(void)
system_state == SYSTEM_BOOTING))
play_dead();
#endif
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -51,7 +51,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
check_pgt_cache();
......@@ -69,7 +69,7 @@ void cpu_idle(void)
set_thread_flag(TIF_POLLING_NRFLAG);
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -56,7 +56,7 @@ void cpu_idle(void)
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched() && !cpu_should_die()) {
ppc64_runlatch_off();
......@@ -93,7 +93,7 @@ void cpu_idle(void)
HMT_medium();
ppc64_runlatch_on();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
if (cpu_should_die())
cpu_die();
......
......@@ -563,7 +563,7 @@ static void yield_shared_processor(void)
static void iseries_shared_idle(void)
{
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched() && !hvlpevent_is_pending()) {
local_irq_disable();
ppc64_runlatch_off();
......@@ -577,7 +577,7 @@ static void iseries_shared_idle(void)
}
ppc64_runlatch_on();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
if (hvlpevent_is_pending())
process_iSeries_events();
......@@ -593,7 +593,7 @@ static void iseries_dedicated_idle(void)
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
if (!need_resched()) {
while (!need_resched()) {
ppc64_runlatch_off();
......@@ -610,7 +610,7 @@ static void iseries_dedicated_idle(void)
}
ppc64_runlatch_on();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -91,10 +91,10 @@ static void default_idle(void)
void cpu_idle(void)
{
for (;;) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched())
default_idle();
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -89,7 +89,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
check_pgt_cache();
......@@ -111,7 +111,7 @@ void cpu_idle(void)
start_critical_timings();
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -95,12 +95,12 @@ void cpu_idle(void)
set_thread_flag(TIF_POLLING_NRFLAG);
while(1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched() && !cpu_is_offline(cpu))
sparc64_yield(cpu);
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
......
......@@ -85,7 +85,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
if (cpu_is_offline(cpu))
BUG(); /* no HOTPLUG_CPU */
......@@ -105,7 +105,7 @@ void cpu_idle(void)
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -246,10 +246,10 @@ void default_idle(void)
if (need_resched())
schedule();
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
nsecs = disable_timer();
idle_sleep(nsecs);
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
}
}
......
......@@ -55,7 +55,7 @@ void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
local_irq_disable();
stop_critical_timings();
......@@ -63,7 +63,7 @@ void cpu_idle(void)
local_irq_enable();
start_critical_timings();
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -99,7 +99,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
check_pgt_cache();
......@@ -116,7 +116,7 @@ void cpu_idle(void)
pm_idle();
start_critical_timings();
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -122,7 +122,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
tick_nohz_idle_enter_norcu();
while (!need_resched()) {
rmb();
......@@ -149,7 +149,7 @@ void cpu_idle(void)
__exit_idle();
}
tick_nohz_idle_exit();
tick_nohz_idle_exit_norcu();
preempt_enable_no_resched();
schedule();
preempt_disable();
......
......@@ -7,6 +7,7 @@
#define _LINUX_TICK_H
#include <linux/clockchips.h>
#include <linux/irqflags.h>
#ifdef CONFIG_GENERIC_CLOCKEVENTS
......@@ -121,18 +122,57 @@ static inline int tick_oneshot_mode_active(void) { return 0; }
#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
# ifdef CONFIG_NO_HZ
extern void tick_nohz_idle_enter(void);
extern void __tick_nohz_idle_enter(void);
static inline void tick_nohz_idle_enter(void)
{
local_irq_disable();
__tick_nohz_idle_enter();
local_irq_enable();
}
extern void tick_nohz_idle_exit(void);
/*
* Call this pair of function if the arch doesn't make any use
* of RCU in-between. You won't need to call rcu_idle_enter() and
* rcu_idle_exit().
* Otherwise you need to call tick_nohz_idle_enter() and tick_nohz_idle_exit()
* and explicitly tell RCU about the window around the place the CPU enters low
* power mode where no RCU use is made. This is done by calling rcu_idle_enter()
* after the last use of RCU before the CPU is put to sleep and by calling
* rcu_idle_exit() before the first use of RCU after the CPU woke up.
*/
static inline void tick_nohz_idle_enter_norcu(void)
{
/*
* Also call rcu_idle_enter() in the irq disabled section even
* if it disables irq itself.
* Just an optimization that prevents from an interrupt happening
* between it and __tick_nohz_idle_enter() to lose time to help
* completing a grace period while we could be in extended grace
* period already.
*/
local_irq_disable();
__tick_nohz_idle_enter();
rcu_idle_enter();
local_irq_enable();
}
static inline void tick_nohz_idle_exit_norcu(void)
{
rcu_idle_exit();
tick_nohz_idle_exit();
}
extern void tick_nohz_irq_exit(void);
extern ktime_t tick_nohz_get_sleep_length(void);
extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time);
# else
static inline void tick_nohz_idle_enter(void)
static inline void tick_nohz_idle_enter(void) { }
static inline void tick_nohz_idle_exit(void) { }
static inline void tick_nohz_idle_enter_norcu(void)
{
rcu_idle_enter();
}
static inline void tick_nohz_idle_exit(void)
static inline void tick_nohz_idle_exit_norcu(void)
{
rcu_idle_exit();
}
......
......@@ -453,18 +453,22 @@ static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
*
* When the next event is more than a tick into the future, stop the idle tick
* Called when we start the idle loop.
* This also enters into RCU extended quiescent state so that this CPU doesn't
* need anymore to be part of any global grace period completion. This way
* the tick can be stopped safely as we don't need to report quiescent states.
*
* If no use of RCU is made in the idle loop between
* tick_nohz_idle_enter() and tick_nohz_idle_exit() calls, then
* tick_nohz_idle_enter_norcu() should be called instead and the arch
* doesn't need to call rcu_idle_enter() and rcu_idle_exit() explicitly.
*
* Otherwise the arch is responsible of calling:
*
* - rcu_idle_enter() after its last use of RCU before the CPU is put
* to sleep.
* - rcu_idle_exit() before the first use of RCU after the CPU is woken up.
*/
void tick_nohz_idle_enter(void)
void __tick_nohz_idle_enter(void)
{
struct tick_sched *ts;
WARN_ON_ONCE(irqs_disabled());
local_irq_disable();
ts = &__get_cpu_var(tick_cpu_sched);
/*
* set ts->inidle unconditionally. even if the system did not
......@@ -473,9 +477,6 @@ void tick_nohz_idle_enter(void)
*/
ts->inidle = 1;
tick_nohz_stop_sched_tick(ts);
rcu_idle_enter();
local_irq_enable();
}
/**
......@@ -551,7 +552,7 @@ void tick_nohz_idle_exit(void)
ktime_t now;
local_irq_disable();
rcu_idle_exit();
if (ts->idle_active || (ts->inidle && ts->tick_stopped))
now = ktime_get();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册