- 08 1月, 2016 2 次提交
-
-
由 Himanshu Madhani 提交于
This patch enables Exchange offload support in Qlogic ISP. To enable exchange offload with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexchoffld to any non-zero number. This will alow ISP firmware to store exchange data structures used by firmware to host memory provided by driver. ISP firmware can supports upto 32k total active exchanges. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
This patch enables Extended Logins support in Qlogic ISP. To enable extended login with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexlogins to any non-zero number. This will alow ISP firmware to store port database structure information of remote login sessions to host memory provided by driver. ISP firmware supports upto 16k total logins. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 12 11月, 2014 1 次提交
-
-
由 Chen Gang 提交于
Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c". The related error and warnings (with allmodconfig under tile): CC [M] drivers/scsi/qla2xxx/qla_nx2.o drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration qla8044_need_reset_handler(struct scsi_qla_host *vha) ^ In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_nx2.c:11: drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha); ^ drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1 make[2]: *** [drivers/scsi/qla2xxx] Error 2 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 CC [M] drivers/scsi/qla2xxx/qla_tmpl.o In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_tmpl.c:7: drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha); ^ Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Acked-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 25 9月, 2014 3 次提交
-
-
由 Arun Easi 提交于
A chip reset can occur after driver submits command to the stack. Abort command processing if a chip reset has occurred or in progress when you get a follow up for a command. Signed-off-by: NArun Easi <arun.easi@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Arun Easi 提交于
Signed-off-by: NArun Easi <arun.easi@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Himanshu Madhani 提交于
Add support for the FDMI-2 fabric switch feature. Since FDMI-2 uses code from FDMI-1, some of the existing code needed to be repaired to prevent fields from being overflowed. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 17 9月, 2014 1 次提交
-
-
由 Joe Lawrence 提交于
Add an uint16_t variant of qla2x00_check_reg_for_disconnect and use these routines to check and schedule a PCI-disconnected board from a centralized place. Signed-off-by: NJoe Lawrence <joe.lawrence@stratus.com> Acked-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 18 7月, 2014 2 次提交
-
-
由 Hannes Reinecke 提交于
Now that we're using 64-bit LUNs internally we need to increase the size of max_luns to 64 bits, too. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Reviewed-by: NEwan Milne <emilne@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Reviewed-by: NEwan Milne <emilne@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 19 5月, 2014 3 次提交
-
-
由 Quinn Tran 提交于
Add support for T10-Dif for Target Mode to qla driver. The driver will look for firmware attribute that support this feature. When the feature is present, the capabilities will be report to TCM layer. Add CTIO CRC2 iocb to build T10-Dif commands. Add support routines to process good & error cases. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Armen Baloyan 提交于
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 16 3月, 2014 3 次提交
-
-
由 Armen Baloyan 提交于
Send aborts to the firmware via the request/response queue mechanism. Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Allow for the capture of a firmware dump but have a sysfs node (allow_cna_fw_dump) to allow the feature to be enabled/disabled dynamically. The default is off. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 19 12月, 2013 5 次提交
-
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
If we become disconnected from the PCI bus/PCIe fabric, there can be long delays in register reads which can cause erroneous decisions to be made and cause a soft lockup if a lock is held too long. As a preventative measure, check for a disconnection (register reads that return -1) and then disable the board if we find ourselves in this condition. For now, check in our interrupt handlers and the per adapter one second timer. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low." This reverts commit 3c290d0bSigned-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 03 9月, 2013 5 次提交
-
-
由 Armen Baloyan 提交于
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Acked-by: NSrinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Joe Carnuccio 提交于
For supported ISPS, Read asic temperature by calling the GET PARAMS (type C) mailbox command. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Armen Baloyan 提交于
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Atul Deshmukh 提交于
[jejb: checkpatch fixes] Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 09 7月, 2013 1 次提交
-
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 12 4月, 2013 1 次提交
-
-
由 Giridhar Malavali 提交于
[jejb: fix up checkpatch issues] Signed-off-by: NAndrew Vazquez <andrew.vasquez@qlogic.com> Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 06 4月, 2013 1 次提交
-
-
由 Joe Carnuccio 提交于
The original patch was not covering all the adapters and firmwares. This commit reverts 3a11711a. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 22 2月, 2013 7 次提交
-
-
由 Joe Carnuccio 提交于
Give priority to I2C thermal. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Currently,the driver is processes RSCNs for each new NPIV ports that is created. Processing the RSCN includes a name server query to see what has changed at the name server side. The name server query is performed by the physical port and each virtual port on the physical adapter (since the RSCN is passed to each virtual port for processing). As the number of virtual ports being created increases, this causes a lot of traffic and busies the firmware. Processing the RSCN for a virtual port we already have a priori knowledge of is not necessary so check the 24-bit fabric ID of the RSCN entry and skip processing it if the RSCN is for a virtual port we already know about. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Joe Carnuccio 提交于
To avoid continually doing ISP resets when get loop id fails to obtain the adapter loop id, first try to do a link initialization. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Base the number of outstanding requests the driver will keep track of on the available resources instead of being hard-coded. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 30 11月, 2012 2 次提交
-
-
由 Joe Carnuccio 提交于
Parameterize qla2x00_get_link_speed_str() to be generic on link speed. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 24 9月, 2012 3 次提交
-
-
由 Atul Deshmukh 提交于
qla2xxx show wrong PCIe(2.5Gb/s x8) speed in the kerenel message. It should be 5.0Gb/s. Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Update the driver copyright from 2003-2011 to 2003-2012. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Minor changes to support loopback functionality with ISP83xx CNAs. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-