[SCSI] qla2xxx: Do link initialization on get loop id failure.

To avoid continually doing ISP resets when get loop id fails to
obtain the adapter loop id, first try to do a link initialization.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_dbg.c

@@ -12,7 +12,7 @@
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
  * | Module Init and Probe        |       0x0126       | 0x4b,0xba,0xfa |
- * | Mailbox commands             |       0x1150       | 0x111a-0x111b  |
+ * | Mailbox commands             |       0x1154       | 0x111a-0x111b  |
  * |                              |                    | 0x112c-0x112e  |
  * |                              |                    | 0x113a         |
  * | Device Discovery             |       0x2087       | 0x2020-0x2022, |

drivers/scsi/qla2xxx/qla_def.h

@@ -814,6 +814,7 @@ typedef struct {
 #define MBC_HOST_MEMORY_COPY		0x53	/* Host Memory Copy. */
 #define MBC_SEND_RNFT_ELS		0x5e	/* Send RNFT ELS request */
 #define MBC_GET_LINK_PRIV_STATS		0x6d	/* Get link & private data. */
+#define MBC_LINK_INITIALIZATION		0x72	/* Do link initialization. */
 #define MBC_SET_VENDOR_ID		0x76	/* Set Vendor ID. */
 #define MBC_PORT_RESET			0x120	/* Port Reset */
 #define MBC_SET_PORT_CONFIG		0x122	/* Set port configuration */

drivers/scsi/qla2xxx/qla_gbl.h

@@ -281,6 +281,9 @@ qla2x00_get_firmware_state(scsi_qla_host_t *, uint16_t *);
 extern int
 qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t);
 
+extern int
+qla24xx_link_initialize(scsi_qla_host_t *);
+
 extern int
 qla2x00_lip_reset(scsi_qla_host_t *);
 

drivers/scsi/qla2xxx/qla_init.c

@@ -2207,6 +2207,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 	char		connect_type[22];
 	struct qla_hw_data *ha = vha->hw;
 	unsigned long flags;
+	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
 	/* Get host addresses. */
 	rval = qla2x00_get_adapter_id(vha,
@@ -2220,6 +2221,13 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 		} else {
 			ql_log(ql_log_warn, vha, 0x2009,
 			    "Unable to get host loop ID.\n");
+			if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) &&
+			    (rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) {
+				ql_log(ql_log_warn, vha, 0x1151,
+				    "Doing link init.\n");
+				if (qla24xx_link_initialize(vha) == QLA_SUCCESS)
+					return rval;
+			}
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		}
 		return (rval);

drivers/scsi/qla2xxx/qla_mbx.c

@@ -1632,6 +1632,54 @@ qla2x00_get_port_name(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t *name,
 	return rval;
 }
 
+/*
+ * qla24xx_link_initialization
+ *	Issue link initialization mailbox command.
+ *
+ * Input:
+ *	ha = adapter block pointer.
+ *	TARGET_QUEUE_LOCK must be released.
+ *	ADAPTER_STATE_LOCK must be released.
+ *
+ * Returns:
+ *	qla2x00 local function return status code.
+ *
+ * Context:
+ *	Kernel context.
+ */
+int
+qla24xx_link_initialize(scsi_qla_host_t *vha)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1152,
+	    "Entered %s.\n", __func__);
+
+	if (!IS_FWI2_CAPABLE(vha->hw) || IS_CNA_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	mcp->mb[0] = MBC_LINK_INITIALIZATION;
+	mcp->mb[1] = BIT_6|BIT_4;
+	mcp->mb[2] = 0;
+	mcp->mb[3] = 0;
+	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1153, "Failed=%x.\n", rval);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1154,
+		    "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
 /*
  * qla2x00_lip_reset
  *	Issue LIP reset mailbox command.