- 26 4月, 2008 1 次提交
-
-
由 Jan Beulich 提交于
.. since it uses ILL_BADSTK (which is meaningless in the context of SIGSEGV). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 4月, 2008 3 次提交
-
-
由 Suresh Siddha 提交于
Only allocate the FPU area when the application actually uses FPU, i.e., in the first lazy FPU trap. This could save memory for non-fpu using apps. for example: on my system after boot, there are around 300 processes, with only 17 using FPU. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Suresh Siddha 提交于
Split the FPU save area from the task struct. This allows easy migration of FPU context, and it's generally cleaner. It also allows the following two optimizations: 1) only allocate when the application actually uses FPU, so in the first lazy FPU trap. This could save memory for non-fpu using apps. Next patch does this lazy allocation. 2) allocate the right size for the actual cpu rather than 512 bytes always. Patches enabling xsave/xrstor support (coming shortly) will take advantage of this. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This annotates NMI functions with notrace. Some tracers may be able to live with this, but some cannot. The safest is to turn it off, it's not particularly interesting anyway. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 4月, 2008 1 次提交
-
-
由 Jason Wessel 提交于
This patch fixes the hang regression with kgdb when the NMI interrupt comes in while the master core is returning from an exception. Adjust the NMI logic such that KGDB will not stop NMI exceptions from occurring by in general returning NOTIFY_DONE. It is not possible to distinguish the debug NMI sync vs the normal NMI apic interrupt so kgdb needs to catch the unknown NMI if it the debugger was previously active on one of the cpus. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 4月, 2008 3 次提交
-
-
由 gorcunov@gmail.com 提交于
This patch renames VM_MASK to X86_VM_MASK (which in turn defined as alias to X86_EFLAGS_VM) to better distinguish from virtual memory flags. We can't just use X86_EFLAGS_VM instead because it is also used for conditional compilation Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- fix build error - fix CONFIG_HEADERS_CHECK error Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Before: total: 86 errors, 29 warnings, 1248 lines checked After: total: 0 errors, 17 warnings, 1281 lines checked No code changed: arch/x86/kernel/traps_32.o: text data bss dec hex filename 8711 2168 72 10951 2ac7 traps_32.o.before 8711 2168 72 10951 2ac7 traps_32.o.after (md5 sums differ because some stack offset positions changed.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 2月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
This was being used to ensure the proper alignment of the FXSAVE/FXRSTOR data. This would create a sparse error in the _correct_ cases, hiding further warnings. Use BUILD_BUG_ON instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 1月, 2008 16 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Small fomatting fixes to 64-bit as well, trailing whitespace and extra semicolon, also move the ifdefs for CONFIG_KALLSYMS into the function itself. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
They now look like: hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000] This makes it easier to pinpoint bugs to specific libraries. And printing the offset into a mapping also always allows to find the correct fault point in a library even with randomized mappings. Previously there was no way to actually find the correct code address inside the randomized mapping. Relies on earlier patch to shorten the printk formats. They are often now longer than 80 characters, but I think that's worth it. [includes fix from Eric Dumazet to check d_path error value] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
Right now, we take the stack pointer early during the backtrace path, but only calculate bp several functions deep later, making it hard to reconcile the stack and bp backtraces (as well as showing several internal backtrace functions on the stack with bp based backtracing). This patch moves the bp taking to the same place we take the stack pointer; sadly this ripples through several layers of the back tracing stack, but it's not all that bad in the end I hope. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
The 32 bit Frame Pointer backtracer code checks if the EBP is valid to do a backtrace; however currently on a failure it just gives up and prints nothing. That's not very nice; we can do better and still print a decent backtrace. This patch changes the backtracer to use the regular backtracing algorithm at the same time as the EBP backtracer; the EBP backtracer is basically used to figure out which part of the backtrace are reliable vs those which are likely to be noise. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
For enhancing the 32 bit EBP based backtracer, I need the capability for the backtracer to tell it's customer that an entry is either reliable or unreliable, and the backtrace printing code then needs to print the unreliable ones slightly different. This patch adds the basic capability, the next patch will add a user of this capability. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
The current x86 32 bit FRAME_POINTER chasing code has a nasty bug in that the EBP tracer doesn't actually update the value of EBP it is tracing, so that the code doesn't actually switch to the irq stack properly. The result is a truncated backtrace: WARNING: at timeroops.c:8 kerneloops_regression_test() (Not tainted) Pid: 0, comm: swapper Not tainted 2.6.24-0.77.rc4.git4.fc9 #1 [<c040649a>] show_trace_log_lvl+0x1a/0x2f [<c0406d41>] show_trace+0x12/0x14 [<c0407061>] dump_stack+0x6c/0x72 [<e0258049>] kerneloops_regression_test+0x44/0x46 [timeroops] [<c04371ac>] run_timer_softirq+0x127/0x18f [<c0434685>] __do_softirq+0x78/0xff [<c0407759>] do_softirq+0x74/0xf7 ======================= This patch fixes the code to update EBP properly, and to check the EIP before printing (as the non-framepointer backtracer does) so that the same test backtrace now looks like this: WARNING: at timeroops.c:8 kerneloops_regression_test() Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #4 [<c0405d17>] show_trace_log_lvl+0x1a/0x2f [<c0406681>] show_trace+0x12/0x14 [<c0406ef2>] dump_stack+0x6a/0x70 [<e01f6040>] kerneloops_regression_test+0x3b/0x3d [timeroops] [<c0426f07>] run_timer_softirq+0x11b/0x17c [<c04243ac>] __do_softirq+0x42/0x94 [<c040704c>] do_softirq+0x50/0xb6 [<c04242a9>] irq_exit+0x37/0x67 [<c040714c>] do_IRQ+0x9a/0xaf [<c04057da>] common_interrupt+0x2e/0x34 [<c05807fe>] cpuidle_idle_call+0x52/0x78 [<c04034f3>] cpu_idle+0x46/0x60 [<c05fbbd3>] rest_init+0x43/0x45 [<c070aa3d>] start_kernel+0x279/0x27f ======================= This shows that the backtrace goes all the way down to user context now. This bug was found during the port to 64 bit of the frame pointer backtracer. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Small step towards unifying traps_32|64.c. No functional changes. Pull out a small helper from an if() statement in die(). Marked as __kprobes as eventually we will want to call this from do_page_fault similar to how X86_64 does it. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
fastcall is always defined to be empty, remove it from arch/x86 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch moves _set_gate and its users to desc.h. We can now use common code for x86_64 and i386. [ mingo@elte.hu: set_system_gate() fixes for nasty crashes. ] Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
To account for the differences in gate descriptor in i386 and x86_64 a gate_desc type is introduced. Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch aims to make the access of struct desc_struct variables equal across architectures. In this patch, I unify the i386 and x86_64 versions under an anonymous union, keeping the way they are accessed untouched (a and b for 32-bit code, individual bit-fields for 64-bit). This solution is not beautiful, but will allow us to integrate common code that differed by the way descriptors were used. This is to be viewed incrementally. There's simply too much code to be fixed at once. In the future, goal is to set up in a single way of acessing the desc_struct fields. Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
This changes size-specific register names (eip/rip, esp/rsp, etc.) to generic names in the thread and tss structures. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
This replaces the debugreg[7] member of thread_struct with individual members debugreg0, etc. This saves two words for the dummies 4 and 5, and harmonizes the code between 32 and 64. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
We have a lot of code which differs only by the naming of specific members of structures that contain registers. In order to enable additional unifications, this patch drops the e- or r- size prefix from the register names in struct pt_regs, and drops the x- prefixes for segment registers on the 32-bit side. This patch also performs the equivalent renames in some additional places that might be candidates for unification in the future. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
This implements user-mode step-until-branch on x86 using the BTF bit in MSR_IA32_DEBUGCTLMSR. It's just like single-step, only less so. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 16 1月, 2008 1 次提交
-
-
由 Peter Zijlstra 提交于
On Sat, 2007-12-29 at 18:06 +0100, Marcin Slusarz wrote: > Hi > Today I've got this (while i was upgrading my gentoo box): > > WARNING: at kernel/lockdep.c:2658 check_flags() > Pid: 21680, comm: conftest Not tainted 2.6.24-rc6 #63 > > Call Trace: > [<ffffffff80253457>] check_flags+0x1c7/0x1d0 > [<ffffffff80257217>] lock_acquire+0x57/0xc0 > [<ffffffff8024d5c0>] __atomic_notifier_call_chain+0x60/0xd0 > [<ffffffff8024d641>] atomic_notifier_call_chain+0x11/0x20 > [<ffffffff8024d67e>] notify_die+0x2e/0x30 > [<ffffffff8020da0a>] do_divide_error+0x5a/0xa0 > [<ffffffff80522bdd>] trace_hardirqs_on_thunk+0x35/0x3a > [<ffffffff80255b89>] trace_hardirqs_on+0xd9/0x180 > [<ffffffff80522bdd>] trace_hardirqs_on_thunk+0x35/0x3a > [<ffffffff80523c2d>] error_exit+0x0/0xa9 > > possible reason: unannotated irqs-off. > irq event stamp: 4693 > hardirqs last enabled at (4693): [<ffffffff80522bdd>] trace_hardirqs_on_thunk+0x35/0x3a > hardirqs last disabled at (4692): [<ffffffff80522c17>] trace_hardirqs_off_thunk+0x35/0x37 > softirqs last enabled at (3546): [<ffffffff80238343>] __do_softirq+0xb3/0xd0 > softirqs last disabled at (3521): [<ffffffff8020c97c>] call_softirq+0x1c/0x30 more early fixups for notify_die().. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 12月, 2007 1 次提交
-
-
由 Ingo Molnar 提交于
Andrew "Eagle Eye" Morton noticed that we use raw_local_save_flags() instead of raw_local_irq_save(flags) in die(). This allows the preemption of oopsing contexts - which is highly undesirable. It also causes CONFIG_DEBUG_PREEMPT to complain, as reported by Miles Lane. this bug was introduced via: commit 39743c9e Author: Andi Kleen <ak@suse.de> Date: Fri Oct 19 20:35:03 2007 +0200 x86: use raw locks during oopses - spin_lock_irqsave(&die.lock, flags); + __raw_spin_lock(&die.lock); + raw_local_save_flags(flags); that is not a correct open-coding of spin_lock_irqsave(): both the ordering is wrong (irqs should be disabled _first_), and the wrong flags-saving API was used. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 11月, 2007 2 次提交
-
-
由 Peter Zijlstra 提交于
Ensure the hardirq state is consistent before using locks. Use the rare trace_hardirqs_fixup() because the trap can happen in any context. resolves this rare lockdep warning: WARNING: at kernel/lockdep.c:2658 check_flags() [<c013571e>] check_flags+0x90/0x140 [<c0138a69>] lock_release+0x4b/0x1d0 [<c0507fea>] notifier_call_chain+0x2a/0x47 [<c050806b>] __atomic_notifier_call_chain+0x64/0x6d [<c0508007>] __atomic_notifier_call_chain+0x0/0x6d [<c050808b>] atomic_notifier_call_chain+0x17/0x1a [<c0131802>] notify_die+0x30/0x34 [<c0506b09>] do_debug+0x3e/0xd4 [<c050658f>] debug_stack_correct+0x27/0x2c [<c04be389>] tcp_rcv_established+0x1/0x620 [<c04c38c2>] tcp_v4_do_rcv+0x2b/0x313 [<c04c56b6>] tcp_v4_rcv+0x467/0x85d [<c0505ff2>] _spin_lock_nested+0x27/0x32 [<c04c5a4d>] tcp_v4_rcv+0x7fe/0x85d [<c04c560e>] tcp_v4_rcv+0x3bf/0x85d [<c04adbb5>] ip_local_deliver_finish+0x11b/0x1b0 [<c04adac8>] ip_local_deliver_finish+0x2e/0x1b0 [<c04ada7b>] ip_rcv_finish+0x27b/0x29a [<c04961e5>] netif_receive_skb+0xfb/0x2a6 [<c04add0f>] ip_rcv+0x0/0x1fb [<c0496354>] netif_receive_skb+0x26a/0x2a6 [<c04961e5>] netif_receive_skb+0xfb/0x2a6 [<c049872e>] process_backlog+0x7f/0xc6 [<c04983ba>] net_rx_action+0xb9/0x1ac [<c0498348>] net_rx_action+0x47/0x1ac [<c01376cb>] trace_hardirqs_on+0x118/0x16b [<c01225e2>] __do_softirq+0x49/0xa2 [<c010595f>] do_softirq+0x60/0xdd [<c0506300>] _spin_unlock_irq+0x20/0x2c [<c0103e4f>] restore_nocheck+0x12/0x15 [<c01440e1>] handle_fasteoi_irq+0x0/0x9b [<c0105a70>] do_IRQ+0x94/0xaa [<c0506300>] _spin_unlock_irq+0x20/0x2c [<c0104832>] common_interrupt+0x2e/0x34 [<c0114703>] native_safe_halt+0x2/0x3 [<c0102c01>] default_idle+0x44/0x65 [<c010257f>] cpu_idle+0x42/0x50 [<c076ea09>] start_kernel+0x26b/0x270 [<c076e317>] unknown_bootoption+0x0/0x196 ======================= irq event stamp: 559190 hardirqs last enabled at (559190): [<c0507316>] kprobe_exceptions_notify+0x299/0x305 hardirqs last disabled at (559189): [<c05067bf>] do_int3+0x1d/0x95 softirqs last enabled at (559172): [<c010595f>] do_softirq+0x60/0xdd softirqs last disabled at (559181): [<c010595f>] do_softirq+0x60/0xdd Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
today, all oopses contain a version number of the kernel, which is nice because the people who actually do bother to read the oops get this vital bit of information always without having to ask the reporter in another round trip. However, WARN_ON() and many other dump_stack() users right now lack this information; the patch below adds this. This information is essential for getting people to use their time effectively when looking at these things; in addition, it's essential for tools that try to collect statistics about defects. Please consider, since its so simple and important for long term kernel quality processes. The code is identical between 32/64 bit; a lot of this code should be unified over time, the patch keeps the identical-ness intact. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 10月, 2007 1 次提交
-
-
由 Peter Zijlstra 提交于
Ensure we fixup the IRQ state before we hit any locking code. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 10月, 2007 4 次提交
-
-
由 Alexey Dobriyan 提交于
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org> Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
This simplifies the io_apic.c __assign_irq_vector() logic and removes the explicit SYSCALL_VECTOR check, and also allows for vectors to be reserved by other mechanisms (ie. lguest). [ tglx: arch/x86 adaptation ] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
Don't want any lockdep or other fragile machinery to run during oopses. Use raw spinlocks directly for oops locking. Also disables irq flag tracing there. [ tglx: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pavel Emelyanov 提交于
Both functions printk the same information, except for CRx and debug registers in the show_registers() one and a bit different manner. So move the common code into one place. This is already done for x86_64, so I think it's worth having the same on i386. This saves 100 bytes of .rodata section :) ... but only 8 from .text :( [ tglx: arch/x86 adaptation ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 10月, 2007 3 次提交
-
-
由 Pavel Emelyanov 提交于
Typically the oops first lines look like this: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c049dfbd *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP ... Such output is gained with some ugly if (!nl) printk("\n"); code and besides being a waste of lines, this is also annoying to read. The following output looks better (and it is how it looks on x86_64): BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c049dfbd *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP ... [ tglx: arch/x86 adaptation ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Beulich 提交于
.. as they're never written to. [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
Fix following section mismatch warning: WARNING: vmlinux.o(.text+0xc88c): Section mismatch: reference to .init.text:trap_init_f00f_bug (between 'init_intel' and 'cpuid4_cache_lookup') init_intel are __cpuint where trap_init_f00f_bug is __init. Fixed by declaring trap_init_f00f_bug __cpuinit. Moved the defintion of trap_init_f00f_bug to the sole user in init.c so the ugly prototype in intel.c could get killed. Frank van Maarseveen <frankvm@frankvm.com> supplied the .config used to reproduce the warning. [ tglx: arch/x86 adaptation ] Cc: Frank van Maarseveen <frankvm@frankvm.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 14 10月, 2007 1 次提交
-
-
由 Dave Jones 提交于
Since the x86 merge, lots of files that referenced their own filenames are no longer correct. Rather than keep them up to date, just delete them, as they add no real value. Additionally: - fix up comment formatting in scx200_32.c - Remove a credit from myself in setup_64.c from a time when we had no SCM - remove longwinded history from tsc_32.c which can be figured out from git. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 2 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-