Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 5月, 2008 2 次提交
  3. 11 5月, 2008 8 次提交
    • D
      sparc: Fix debugger syscall restart interactions. · 28e61036
      由 David S. Miller 提交于 
      So, forever, we've had this ptrace_signal_deliver implementation
which tries to handle all of the nasties that can occur when the
debugger looks at a process about to take a signal.  It's meant
to address all of these issues inside of the kernel so that the
debugger need not be mindful of such things.

Problem is, this doesn't work.

The idea was that we should do the syscall restart business first, so
that the debugger captures that state.  Otherwise, if the debugger for
example saves the child's state, makes the child execute something
else, then restores the saved state, we won't handle the syscall
restart properly because we lose the "we're in a syscall" state.

The code here worked for most cases, but if the debugger actually
passes the signal through to the child unaltered, it's possible that
we would do a syscall restart when we shouldn't have.

In particular this breaks the case of debugging a process under a gdb
which is being debugged by yet another gdb.  gdb uses sigsuspend
to wait for SIGCHLD of the inferior, but if gdb itself is being
debugged by a top-level gdb we get a ptrace_stop().  The top-level gdb
does a PTRACE_CONT with SIGCHLD to let the inferior gdb see the
signal.  But ptrace_signal_deliver() assumed the debugger would cancel
out the signal and therefore did a syscall restart, because the return
error was ERESTARTNOHAND.

Fix this by simply making ptrace_signal_deliver() a nop, and providing
a way for the debugger to control system call restarting properly:

1) Report a "in syscall" software bit in regs->{tstate,psr}.
   It is set early on in trap entry to a system call and is fully
   visible to the debugger via ptrace() and regsets.

2) Test this bit right before doing a syscall restart.  We have
   to do a final recheck right after get_signal_to_deliver() in
   case the debugger cleared the bit during ptrace_stop().

3) Clear the bit in trap return so we don't accidently try to set
   that bit in the real register.

As a result we also get a ptrace_{is,clear}_syscall() for sparc32 just
like sparc64 has.

M68K has this same exact bug, and is now the only other user of the
ptrace_signal_deliver hook.  It needs to be fixed in the same exact
way as sparc.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      28e61036
    • D
      sparc: Fix ptrace() detach. · 986bef85
      由 David S. Miller 提交于 
      Forever we had a PTRACE_SUNOS_DETACH which was unconditionally
recognized, regardless of the personality of the process.

Unfortunately, this value is what ended up in the GLIBC sys/ptrace.h
header file on sparc as PTRACE_DETACH and PT_DETACH.

So continue to recognize this old value.  Luckily, it doesn't conflict
with anything we actually care about.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      986bef85
    • L
      BKL: revert back to the old spinlock implementation · 8e3e076c
      由 Linus Torvalds 提交于 
      The generic semaphore rewrite had a huge performance regression on AIM7
(and potentially other BKL-heavy benchmarks) because the generic
semaphores had been rewritten to be simple to understand and fair.  The
latter, in particular, turns a semaphore-based BKL implementation into a
mess of scheduling.

The attempt to fix the performance regression failed miserably (see the
previous commit 00b41ec2 'Revert
"semaphore: fix"'), and so for now the simple and sane approach is to
instead just go back to the old spinlock-based BKL implementation that
never had any issues like this.

This patch also has the advantage of being reported to fix the
regression completely according to Yanmin Zhang, unlike the semaphore
hack which still left a couple percentage point regression.

As a spinlock, the BKL obviously has the potential to be a latency
issue, but it's not really any different from any other spinlock in that
respect.  We do want to get rid of the BKL asap, but that has been the
plan for several years.

These days, the biggest users are in the tty layer (open/release in
particular) and Alan holds out some hope:

  "tty release is probably a few months away from getting cured - I'm
   afraid it will almost certainly be the very last user of the BKL in
   tty to get fixed as it depends on everything else being sanely locked."

so while we're not there yet, we do have a plan of action.
Tested-by: NYanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alexander Viro <viro@ftp.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8e3e076c
    • I
      x86: rdc: leds build/config fix · 82fd8667
      由 Ingo Molnar 提交于 
      select NEW_LEDS for now until the Kconfig dependencies have been
fixed.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      82fd8667
    • H
      x86: restrict keyboard io ports reservation to make ipmi driver work · 9096bd7a
      由 Helge Wagner 提交于 
      On some of our (single board computer) boards (x86) we are using an
IPMI controller that uses I/O ports 0x62 and 0x66 for a KCS (keyboard
controller style) IPMI system interface.

Trying to load the openipmi driver fails, because the ports
(0x62/0x66) are reserved for keyboard. keyboard reserves the full
range 0x60-0x6F while it doesn't need to.

Reserve only ports 0x60 and 0x64 for the legacy PS/2 i8042 keyboad
controller instead of 0x60-0x6F to allow the openipmi driver to work.

[ tglx: added 64bit fixup ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9096bd7a
    • S
      x86: fix fpu restore from sig return · fd3c3ed5
      由 Suresh Siddha 提交于 
      If the task never used fpu, initialize the fpu before restoring the FP
state from the signal handler context. This will allocate the fpu
state, if the task never needed it before.
Reported-and-bisected-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NEric Sesterhenn <snakebyte@gmx.de>
Cc: Frederik Deweerdt <deweerdt@free.fr>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      fd3c3ed5
    • Y
      x86: remove spew print out about bus to node mapping · 06461539
      由 Yinghai Lu 提交于 
      Jeff Garzik pointed out that this printout is not needed.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      06461539
    • T
      x86: revert printk format warning change which is for linux-next · 5ecddceb
      由 Thomas Gleixner 提交于 
      commit 62179849
    x86: fix setup printk format warning

is for linux-next and not for .26
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      5ecddceb
  5. 10 5月, 2008 2 次提交
  7. 09 5月, 2008 17 次提交
  9. 08 5月, 2008 11 次提交