Commit 2a6b6976
(ACPI: Store NVS state even when entering suspend to RAM) caused the
ACPI suspend code save the NVS area during suspend and restore it
during resume unconditionally, although it is known that some systems
need to use acpi_sleep=s4_nonvs for hibernation to work.  To allow
the affected systems to avoid saving and restoring the NVS area
during suspend to RAM and resume, introduce kernel command line
option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its
alias temporarily (add acpi_sleep=s4_nonvs to the feature removal
file).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 .
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Ntomas m <tmezzadra@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

When the user passes the kernel parameter acpi_enforce_resources=lax,
the ACPI resources are no longer protected, so a native driver can
make use of them. In that case, we do not want the asus_atk0110 to be
loaded. Unfortunately, this driver loads automatically due to its
MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for
the same device - this is bad.

So I suggest that we prevent the asus_atk0110 driver from loading if
acpi_enforce_resources=lax.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Len Brown <lenb@kernel.org>

The ACPI spec tells us that the firmware will reenable SCI_EN on resume.
Reality disagrees in some cases. The ACPI spec tells us that the only way
to set SCI_EN is via an SMM call.
https://bugzilla.kernel.org/show_bug.cgi?id=13745 shows us that doing so
may break machines. Tracing the ACPI calls made by Windows shows that it
unconditionally sets SCI_EN on resume with a direct register write, and
therefore the overwhelming probability is that everything is fine with
this behaviour.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

In perverse acpi implementations the isa irqs are not identity mapped
to the first 16 gsi.  Furthermore at least the extended interrupt
resource capability may return gsi's and not isa irqs.  So since
what we get from acpi is a gsi teach acpi_get_overrride_irq to
operate on a gsi instead of an isa_irq.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-2-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There are a number of cases where the current code makes the assumption
that isa irqs identity map to the first 16 acpi global system intereupts.
In most instances that assumption is correct as that is the required
behaviour in dual i8259 mode and the default behavior in ioapic mode.

However there are some systems out there that take advantage of acpis
interrupt remapping  for the isa irqs to have a completely different
mapping of isa_irq to gsi.

Introduce acpi_isa_irq_to_gsi to perform this mapping explicitly in the
code that needs it.  Initially this will be just the current assumed
identity mapping to ensure it's introduction does not cause regressions.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-1-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

cleanup only.

setup_arch(), doesn't care care if ACPI initialization succeeded
or failed, so delete acpi_boot_table_init()'s return value.
Signed-off-by: NLen Brown <len.brown@intel.com>

Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

v2->v1:
.improve debug info as suggedted by Bjorn,Kenji
.API is using uuid string as suggested by Alexey

Add an API to execute _OSC. A lot of devices can have this method, so add a
generic API.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_check_resource_conflict() doesn't change the resource
it operates on, so the res parameter can be marked const.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_osi_setup() does not depend on CONFIG_DMI
acpi_dmi_osi_linux()'s definition doesn't depend on CONFIG_DMI either
Signed-off-by: NLen Brown <len.brown@intel.com>

users of acpi.h that need dmi.h should include it directly.
Signed-off-by: NLen Brown <len.brown@intel.com>

linux/acpi.h is the top level header for interfacing
with the ACPI sub-system, so acpi_disabled should be
up there instead of down in asm/acpi.h -- particularly
since asm/acpi.h doesn't exist for all architectures.

Same story for acpi_table_parse(), which is a top-level
API to Linux/ACPI.

This is necessary for building some code that
used to always depend on CONFIG_ACPI=y, but will soon
also need to build with CONFIG_ACPI=n.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Move
arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg()
to
arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg()
where it is used, and make it static.

Move associated globals and helper routine with it.

No functional change.

This code move is in preparation for SFI support,
which will allow the PCI code to find the MCFG table
on systems which do not support ACPI.
Signed-off-by: NLen Brown <len.brown@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NLen Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This counter may prove useful in debugging some
spurious interrupt issues seen in the field.
Signed-off-by: NLen Brown <len.brown@intel.com>

All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
    
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
    
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

- Rename pci_osc_control_set() to acpi_pci_osc_control_set() according
  to the other API names in drivers/acpi/pci_root.c.

- Move _OSC related definitions to include/linux/acpi.h because _OSC
  related API is implemented in drivers/acpi/pci_root.c now.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: NAndrew Patterson <andrew.patterson@hp.com>
Tested-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: fix build error

to fix:

  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here
  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

to prevent wrongly overwriting fixmap that still want to use.

ACPI used to rely on low mappings being all linearly mapped and
grew a habit: it never really unmapped certain kinds of tables
after use.

This can cause problems - for example the hypothetical case
when some spurious access still references it.

v2: remove prev_map and prev_size in __apci_map_table
v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to
early_acpi_os_unmap_memory
v4: fix typo in one acpi_get_table_with_size calling
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The struct acpi_prt_entry is used only in pci_irq.c, so there's no
need for the declaration to be public.  This patch moves it into
pci_irq.c.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

On some machines it may be necessary to disable the saving/restoring
of the ACPI NVS memory region during hibernation/resume.  For this
purpose, introduce new ACPI kernel command line option
acpi_sleep=s4_nonvs.

Based on a patch by Zhang Rui.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@tuxonice.net>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

If an ACPI graphics device supports backlight brightness functions (cmp. with
latest ACPI spec Appendix B), let the ACPI video driver control backlight and
switch backlight control off in vendor specific ACPI drivers (asus_acpi,
thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi).

Currently it is possible to load above drivers and let both poke on the
brightness HW registers, the video and vendor specific ACPI drivers -> bad.

This patch provides the basic support to check for BIOS capabilities before
driver loading time. Driver specific modifications are in separate follow up
patches.

"acpi_backlight=vendor"
	Prever vendor driver over ACPI driver for backlight.
"acpi_backlight=video" (default)
	Prever ACPI driver over vendor driver for backlight.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Remove CONFIG_ACPI_EC.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

Per section 6.5.4 of the ACPI 3.0b specification,

    OSPM must make Embedded Controller operation regions, accessed
    via the Embedded Controllers described in ECDT, available before
    executing any control method.

The ECDT table is optional, but if it is present, the above text
means that the EC it describes is a required part of the ACPI
subsystem, so CONFIG_ACPI_EC=n wouldn't make sense.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

This was a workaround for 32bit numa SRAT processing, and we removed those
workarounds, making 32 bit more like 64 bit.  HAVE_ARCH_PARSE_SRAT is no
longer defined anywhere.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI defines a hardware signature.  BIOS calculates the signature according to
hardware configure and if hardware changes while hibernated, the signature
will change.  In that case, S4 resume should fail.

Still, there may be systems on which this mechanism does not work correctly,
so it is better to provide a workaround for them.  For this reason, add a new
switch to the acpi_sleep= command line argument allowing one to disable
hardware signature checking.

[shaohua.li@intel.com: build fix]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ACPI PM: Add possibility to change suspend sequence

There are some systems out there that don't work correctly with
our current suspend/hibernation code ordering.  Provide a workaround
for these systems allowing them to pass 'acpi_sleep=old_ordering' in
the kernel command line so that it will use the pre-ACPI 2.0 ("old")
suspend code ordering.

Unfortunately, this requires us to add a platform hook to the
resuming of devices for recovering the platform in case one of the
device drivers' .suspend() routines returns error code.  Namely,
ACPI 1.0 specifies that _PTS should be called before suspending
devices, but _WAK still should be called before resuming them in
order to undo the changes made by _PTS.  However, if there is an
error during suspending devices, they are automatically resumed
without returning control to the PM core, so the _WAK has to be
called from within device_resume() in that cases.

The patch also reorders and refactors the ACPI suspend/hibernation
code to avoid duplication as far as reasonably possible.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

[mingo@elte.hu: split from "x86_64: get boot_cpu_id as early for k8_scan_nodes]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

http://bugzilla.kernel.org/show_bug.cgi?id=9939Signed-off-by: NLen Brown <len.brown@intel.com>

Two cleanups to <linux/acpi.h>:
* Stop defining acpi_mp_config, it isn't used anywhere.
* Discard nested "#ifdef CONFIG_ACPI", they are useless and
  error-prone.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Export acpi_check_resource_conflict(), sometimes drivers already have
a struct resource at hand so no need to use the wrappers to build a new
one.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Small ACPICA extension to be able to store the name of operation regions in osl.c later

In ACPI, AML can define accesses to IO ports and System Memory by Operation
Regions.  Those are not registered as done by PNPACPI using resource templates
(and _CRS/_SRS methods).

The IO ports and System Memory regions may get accessed by arbitrary AML code.
 When native drivers are accessing the same resources bad things can happen
(e.g.  a critical shutdown temperature of 3000 C every 2 months or so).

It is not really possible to register the operation regions via
request_resource, as they often overlap with pnp or other resources (e.g.
statically setup IO resources below 0x100).

This approach stores all Operation Region declarations (IO and System Memory
only) at ACPI table parse time.  It offers a similar functionality like
request_region and let drivers which are known to possibly use the same IO
ports and Memory which are also often used by ACPI (hwmon and i2c) check for
ACPI interference.

A boot parameter acpi_enforce_resources=strict/lax/no is provided, which
is default set to lax:
  - strict: let conflicting drivers fail to load with an error message
  - lax:    let conflicting driver work normal with a warning message
  - no:     no functional change at all
Depending on the feedback and the kind of interferences we see, this
should be set to strict at later time.

Goal of this patch set is:
  - Identify ACPI interferences in bug reports (very hard to reproduce
    and to identify)
  - Find BIOSes for that an ACPI driver should exist for specific HW
    instead of a native one.
  - stability in general

Provide acpi_check_{mem_}region.

Drivers can additionally check against possible ACPI interference by also
invoking this shortly before they call request_region.
If -EBUSY is returned, the driver must not load.
Use acpi_enforce_resources=strict/lax/no options to:
  - strict: let conflicting drivers fail to load with an error message
  - lax:    let conflicting driver work normal with a warning message
  - no:     no functional change at all

Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

See Documentation/ABI/testing/sysfs-firmware-acpi
Based-on-original-patch-by: NLuming Yu <luming.yu@intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

The following is an implementation of the Windows Management
Instrumentation (WMI) ACPI interface mapper (PNP0C14).

What it does:

Parses the _WDG method and exports functions to process WMI method calls,
data block query/ set commands (both based on GUID) and does basic event
handling.

How: WMI presents an in kernel interface here (essentially, a minimal
wrapper around ACPI)

(const char *guid assume the 36 character ASCII representation of
a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB)

wmi_evaluate_method(const char *guid, u8 instance, u32 method_id,
const struct acpi_buffer *in, struct acpi_buffer *out)

wmi_query_block(const char *guid, u8 instance,
struct acpi_buffer *out)

wmi_set_block(const char *guid, u38 instance,
const struct acpi_buffer *in)

wmi_install_notify_handler(acpi_notify_handler handler);

wmi_remove_notify_handler(void);

wmi_get_event_data(u32 event, struct acpi_buffer *out)

wmi_has_guid(const char guid*)

wmi_has_guid() is a helper function to find if a GUID exists or not on the
system (a quick and easy way for WMI dependant drivers to see if the
the method/ block they want exists, since GUIDs are supposed to be unique).

Event handling - allow a WMI based driver to register a notifier handler
for each GUID with WMI. When a notification is sent to a GUID in WMI, the
handler registered with WMI is then called (it is left to the caller to
ask for the WMI event data associated with the GUID, if needed).

What it won't do:

Unicode - The MS article[1] calls for converting between ASCII and Unicode (or
vice versa) if a GUID is marked as "string". This is left up to the calling
driver.

Handle a MOF[1] - the WMI mapper just exports methods, data and events to
userspace. MOF handling is down to userspace.

Userspace interface - this will be added later.

[1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx

===
ChangeLog
==

v1 (2007-10-02):

* Initial release

v2 (2007-10-05):

* Cleaned up code - split up super "wmi_evaluate_block" -> each external
  symbol now handles its own ACPI calls, rather than handing off to
  a "super" method (and in turn, is a lot simpler to read)
* Added a find_guid() symbol - return true if a given GUID exists on
  the system
* wmi_* functions now return type acpi_status (since they are just
  fancy wrappers around acpi_evaluate_object())
* Removed extra debug code

v3 (2007-10-27)

* More code clean up - now passes checkpatch.pl
* Change data block calls - ref MS spec, method ID is not required for
  them, so drop it from the function parameters.
* Const'ify guid in the function call parameters.
* Fix _WDG buffer handling - copy the data to our own private structure.
* Change WMI from tristate to bool - otherwise the external functions are
  not exported in linux/acpi.h if you try to build WMI as a module.
* Fix more flag comparisons.
* Add a maintainers entry - since I wrote this, I should take the blame
  for it.

v4 (2007-10-30)

* Add missing brace from after fixing checkpatch errors.
* Rewrote event handling - allow external drivers to register with WMI to
  handle WMI events
* Clean up flags and sanitise flag handling

v5 (2007-11-03)

* Add sysfs interface for userspace. Export events over netlink again.
* Remove module left overs, fully convert to built-in driver.
* Tweak in-kernel API to use u8 for instance, since this is what the GUID
  blocks use (so instance cannot be greater than u8).
* Export wmi_get_event_data() for in kernel WMI drivers.

v6 (2007-11-07)

* Split out userspace into a different patch

v7 (2007-11-20)

* Fix driver to handle multiple PNP0C14 devices - store all GUIDs using
  the kernel's built in list functions, and just keep adding to the list
  every time we handle a PNP0C14 devices - GUIDs will always be unique,
  and WMI callers do not know or care about different devices.
* Change WMI event handler registration to use its' own event handling
  struct; we should not pass an acpi_handle down to any WMI based drivers
  - they should be able to function with only the calls provided in WMI.
* Update my e-mail address

v8 (2007-11-28)

* Convert back to a module.
* Update Kconfig to default to building as a module.
* Remove an erroneous printk.
* Simply comments for string flag (since we now leave the handling to the
  caller).

v9 (2007-12-07)

* Add back missing MODULE_DEVICE_TABLE for autoloading
* Checkpatch fixes

v10 (2007-12-12)

* Workaround broken GUIDs declared expensive without a WCxx method.
* Minor cleanups

v11 (2007-12-17)

* More fixing for broken GUIDs declared expensive without a WCxx method.
* Add basic EmbeddedControl region handling.

v12 (2007-12-18)

* Changed EC region handling code, as per Alexey's comments.

v13 (2007-12-27)

* Changed event handling so that we can have one event handler registered
  per GUID, as per Matthew Garrett's suggestion.

v14 (2008-01-12)

* Remove ACPI debug statements

v15 (2008-02-01)

* Replace two remaining 'x == NULL' type tests with '!x'

v16 (2008-02-05)

* Change MAINTAINERS entry, as I am not, and never have been, paid to work
  on WMI
* Remove 'default' line from Kconfig
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
CC: Alexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

If BIOS invokes _OSI(Linux), the kernel response
depends on what the ACPI DMI list knows about the system,
and that is reflectd in dmesg:

1) System unknown to DMI:

ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: 7661W1P
ACPI: DMI Product Version: ThinkPad T61
ACPI: DMI Board Name: 7661W1P
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 10/18/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org

2) System known to DMI, but effect of OSI(Linux) unknown:

ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org

3) System known to DMI, which disables _OSI(Linux):

ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI

4) System known to DMI, which enable _OSI(Linux):

ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
...
ACPI: BIOS _OSI(Linux) query honored via DMI

cmdline overrides take precidence over the built-in
default and the DMI prescribed default.
cmdline "acpi_osi=Linux" results in:

ACPI: BIOS _OSI(Linux) query honored via cmdline
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI tables follow a tree structure in memory.
The root of the tree is the RSDP (Root System Description Pointer).

To find the RSDP, the OS searches for the signature "RSD PTR "
in well known physical memory locations.  Then the OS computes
a table checksum to verify that the signature is really part
of a valid table header.

Some systems have a proper signature but an invalid checksum;
followed elsewhere by a proper signature with valid checksum.

http://bugzilla.kernel.org/show_bug.cgi?id=9444

The Linux RSDP scanning code bailed out on those systems
and as a result they booted with ACPI disabled.

Fix this by deleting the Linux RSDP scanning code and
plugging in the ACPICA RSDP scanning code.
Signed-off-by: NLen Brown <len.brown@intel.com>

Use mp_irqs[] to get PNP device's interrupt polarity and trigger.
There are two reasons to do this:
1. BIOS bug for PNP interrupt
2. BIOS explictly does override
mp_irqs[] should cover all the cases.

http://bugzilla.kernel.org/show_bug.cgi?id=5243
http://bugzilla.kernel.org/show_bug.cgi?id=7679
http://bugzilla.kernel.org/show_bug.cgi?id=9153

[lenb: fixed !IOAPIC and 64-bit !SMP builds]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>