SM/SMA traps received by the ipath driver should be forwarded to the
SM if it is running on the host.  The ib_ipath driver was incorrectly
replying with "bad method."
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add Chien and remove Nishi from maintainers list for NetEffect.
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The driver supports a few features (RNR NAK, port active event, SRQ
resize) that were not reported in the device capability flags.  This
patch fixes that.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Gabriel C <nix.or.die@googlemail.com> pointed out that when the x86
bitops are updated to operate on unsigned long, the code in
sdma_abort_task() will produce warnings:

    drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task':
    drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type

and so on, because it uses test_bit() to operation on a u64 value
(returned by ipath_read_kref64() for a hardware register).

Fix up these warnings by converting the test_bit() operations to &ing
with appropriate symbolic defines of the bits within the hardware
register.  This has the benign side-effect of making the code more
self-documenting as well.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: prevent PGE flush from interruption/preemption
  x86: use explicit copy in vdso_gettimeofday()
  namespacecheck: automated fixes
  x86/xen: fix arbitrary_virt_to_machine()
  x86: don't read maxlvt before checking if APIC is mapped
  x86: disable TSC for sched_clock() when calibration failed
  x86: distangle user disabled TSC from unstable
  x86: fix setup of cyc2ns in tsc_64.c

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] integrator: fix build warnings and errors
  [ARM] fix OMAP include loops
  Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"
  [ARM] 5053/1: define before use of processor_id
  [ARM] 5052/1: export clock functions for the at91x40
  [ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too
  [ARM] omap: fix omap clk support build errors
  [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.
  [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo
  [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation
  [ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisation
  [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c
  [ARM] 5025/2: fix collie cpu initialisation

Somehow the spidev code forgot to include a critical mechanism: when the
underlying device is removed (e.g.  spi_master rmmod), open file
descriptors must be prevented from issuing new I/O requests to that
device.  On penalty of the oopsing reported by Sebastian Siewior
<bigeasy@tglx.de> ...

This is a partial fix, adding handshaking between the lower level (SPI
messaging) and the file operations using the spi_dev.  (It also fixes an
issue where reads and writes didn't return the number of bytes sent or
received.)

There's still a refcounting issue to be addressed (separately).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Reported-by: NSebastian Siewior <bigeasy@tglx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a slight change in the namespace cgroup subsystem api.

The change is that previously when cgroup_clone() was called (currently
only from the unshare path in ns_proxy cgroup, you'd get a new group named
"node_$pid" whereas now you'll get a group named after just your pid.)

The only users who would notice it are those who are using the ns_proxy
cgroup subsystem to auto-create cgroups when namespaces are unshared -
something of an experimental feature, which I think really needs more
complete container/namespace support in order to be useful.  I suspect the
only users are Cedric and Serge, or maybe a few others on
containers@lists.linux-foundation.org.  And in fact it would only be
noticed by the users who make the assumption about how the name is
generated, rather than getting it from the /proc/<pid>/cgroups file for
the process in question.

Whether the change is actually needed or not I'm fairly agnostic on, but I
guess it is more elegant to just use the pid as the new group name rather
than adding a fairly arbitrary "node_" prefix on the front.

[menage@google.com: provided changelog]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: "Paul Menage" <menage@google.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

for_each_pgdat() was renamed to for_each_online_pgdat() and kerneldoc
comments should be updated accordingly.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following build error:

ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If none of the switch cases match, the PR_SET_PDEATHSIG and
PR_SET_DUMPABLE cases of the switch statement will never write to local
variable `error'.
Signed-off-by: NShi Weihua <shiwh@cn.fujitsu.com>
Cc: Andrew G. Morgan <morgan@kernel.org>
Acked-by: N"Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

including of <asm/mpc85xx.h> causes build problems since it doesn't exist.

Also removed warning:
drivers/edac/mpc85xx_edac.c:45: warning: 'mpc85xx_ctl_name' defined but not used
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDoug Thompson <dougthompson@xmission.com>
Acked-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes various gpio-related build errors (mostly potential)
reported in part by Russell King and Uwe Kleine-König.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a correct MODULE_ALIAS() entry for this driver to enable udev module
loading.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the old changelog entries which are now out of date and should be
extractable from git anyway.  Also tidy up the copyright for the driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following warning by checking the result of device_create_file and
printing an error but not removing the device (loss of debug registers is
not fatal).

drivers/video/s3c2410fb.c:905: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a blank level of FB_BLANK_POWERDOWN is used, we should shut down the
controller so that it no longer tries to produce any panel signals or
data, and shuts down the DMA which is not needed.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To keep backwards compatibility, reverse the meanings of these flags so
that when they are not set, the driver uses the original behvaiour.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trying to add memory via add_memory() from within an initcall function
results in

bootmem alloc of 163840 bytes failed!
Kernel panic - not syncing: Out of memory

This is caused by zone_wait_table_init() which uses system_state to decide
if it should use the bootmem allocator or not.

When initcalls are handled the system_state is still SYSTEM_BOOTING but
the bootmem allocator doesn't work anymore.  So the allocation will fail.

To fix this use slab_is_available() instead as indicator like we do it
everywhere else.

[akpm@linux-foundation.org: coding-style fix]
Reviewed-by: NAndy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When booting 2.6.26-rc3 on a multi-node x86_32 numa system we are seeing
panics when trying node local allocations:

 BUG: unable to handle kernel NULL pointer dereference at 0000034c
 IP: [<c1042507>] get_page_from_freelist+0x4a/0x18e
 *pdpt = 00000000013a7001 *pde = 0000000000000000
 Oops: 0000 [#1] SMP
 Modules linked in:

 Pid: 0, comm: swapper Not tainted (2.6.26-rc3-00003-g5abc28d #82)
 EIP: 0060:[<c1042507>] EFLAGS: 00010282 CPU: 0
 EIP is at get_page_from_freelist+0x4a/0x18e
 EAX: c1371ed8 EBX: 00000000 ECX: 00000000 EDX: 00000000
 ESI: f7801180 EDI: 00000000 EBP: 00000000 ESP: c1371ec0
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
 Process swapper (pid: 0, ti=c1370000 task=c12f5b40 task.ti=c1370000)
 Stack: 00000000 00000000 00000000 00000000 000612d0 000412d0 00000000 000412d0
        f7801180 f7c0101c f7c01018 c10426e4 f7c01018 00000001 00000044 00000000
        00000001 c12f5b40 00000001 00000010 00000000 000412d0 00000286 000412d0
 Call Trace:
  [<c10426e4>] __alloc_pages_internal+0x99/0x378
  [<c10429ca>] __alloc_pages+0x7/0x9
  [<c105e0e8>] kmem_getpages+0x66/0xef
  [<c105ec55>] cache_grow+0x8f/0x123
  [<c105f117>] ____cache_alloc_node+0xb9/0xe4
  [<c105f427>] kmem_cache_alloc_node+0x92/0xd2
  [<c122118c>] setup_cpu_cache+0xaf/0x177
  [<c105e6ca>] kmem_cache_create+0x2c8/0x353
  [<c13853af>] kmem_cache_init+0x1ce/0x3ad
  [<c13755c5>] start_kernel+0x178/0x1ee

This occurs when we are scanning the zonelists looking for a ZONE_NORMAL
page.  In this system there is only ZONE_DMA and ZONE_NORMAL memory on
node 0, all other nodes are mapped above 4GB physical.  Here is a dump
of the zonelists from this system:

    zonelists pgdat=c1400000
     0: c14006c0:2 f7c006c0:2 f7e006c0:2 c1400360:1 c1400000:0
     1: c14006c0:2 c1400360:1 c1400000:0
    zonelists pgdat=f7c00000
     0: f7c006c0:2 f7e006c0:2 c14006c0:2 c1400360:1 c1400000:0
     1: f7c006c0:2
    zonelists pgdat=f7e00000
     0: f7e006c0:2 c14006c0:2 f7c006c0:2 c1400360:1 c1400000:0
     1: f7e006c0:2

When performing a node local allocation we call get_page_from_freelist()
looking for a page.  It in turn calls first_zones_zonelist() which returns
a preferred_zone.  Where there are no applicable zones this will be NULL.
However we use this unconditionally, leading to this panic.

Where there are no applicable zones there is no possibility of a successful
allocation, so simply fail the allocation.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

enable_irq_wake() and disable_irq_wake() need to be balanced.  However,
serial_core.c calls these for different conditions during the suspend and
resume functions...

This is causing a regular WARN_ON() as found at
http://www.kerneloops.org/search.php?search=set_irq_wake

This patch makes the conditions for triggering the _wake enable/disable
sequence identical.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Any file under /proc/net opened more than once leaked the refcounter
on the module it belongs to.

The problem is that module_get is called for each file opening while
module_put is called only when /proc inode is destroyed. So, lets put
module counter if we are dealing with already initialised inode.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10737Signed-off-by: NDenis V. Lunev <den@openvz.org>
Cc: David Miller <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NRobert Olsson <robert.olsson@its.uu.se>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Reported-by: NRoland Kletzing <devzero@web.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In 2.6.25, ramdisk devices show up in /proc/partitions, which is a
behaviour change from the old rd.c.  Add GENHD_FL_SUPPRESS_PARTITION_INFO,
which was present in rd.c.

All kernels prior to 2.6.25 weren't displaying ramdisks in
/proc/partitions.  Since there are many userspace tools using information
from /proc/partitions some of them may now behave incorrectly (I didn't
tested any though).  For example before 2.6.25 /proc/partitions was empty
if no block devices like hard disks and such were detected by kernel.  Now
all 16 ramdisks are always visible there.  Some software may rely on such
information (I mean, on empty /proc/partitions).

There was quite similar situation back in 2004, and ramdisks were excluded
back from displaying.  Thats why I called this a regression (maybe a bit
unfortunate).  See this patch for info:
http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch

I also think that someone somewhere (long time ago) excluded ramdisks from
/proc/partitions for good reasons.  It is possible that now such new
"feature" is harmless, but I think there are more chances that someone
will say "hey, /proc/partitions has changed, now my software doesn't work"
then "hey where did my new 2.6.25 feature go".  nbd devices are also
excluded, maybe for very same (unknown to me) reasons.
Signed-off-by: NMarcin Krol <hawk@pld-linux.org>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This doesn't need to be two modules, and making it one cleans up the
problem
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last gpio belonging to a chip is chip->base + chip->ngpios - 1.  Some
places in the code, but not all, forgot the critical minus one.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return value of mcp23s08_read_regs() can only be evaluated when signed
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Teach drivers/gpio/pca953x.c about PCA9554, another compatible chip.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__exit_signal() does flush_sigqueue(tsk->pending) outside of ->siglock.
This can race with another thread doing sigqueue_free(), we can free the
same SIGQUEUE_PREALLOC sigqueue twice or corrupt the pending->list.

Note that even sys_exit_group() can trigger this race, not only
sys_timer_delete().

Move the callsite of flush_sigqueue(tsk->pending) under ->siglock.

This patch doesn't touch flush_sigqueue(->shared_pending) below, it is
called when there are no other threads which can play with signals, and
sigqueue_free() can't be used outside of our thread group.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we get any IO error during a recovery (rebuilding a spare), we abort
the recovery and restart it.

For RAID6 (and multi-drive RAID1) it may not be best to restart at the
beginning: when multiple failures can be tolerated, the recovery may be
able to continue and re-doing all that has already been done doesn't make
sense.

We already have the infrastructure to record where a recovery is up to
and restart from there, but it is not being used properly.
This is because:
  - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR,
    which causes the recovery not be be checkpointed.
  - We remove spares and then re-added them which loses important state
    information.

The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't
needed.  If there is an error, the relevant drive will be marked as
Faulty, and that is enough to ensure correct handling of the error.  So we
first remove MD_RECOVERY_ERR, changing some of the uses of it to
MD_RECOVERY_INTR.

Then we cause the attempt to remove a non-faulty device from an array to
fail (unless recovery is impossible as the array is too degraded).  Then
when remove_and_add_spares attempts to remove the devices on which
recovery can continue, it will fail, they will remain in place, and
recovery will continue on them as desired.

Issue:  If we are halfway through rebuilding a spare and another drive
fails, and a new spare is immediately available,  do we want to:
 1/ complete the current rebuild, then go back and rebuild the new spare or
 2/ restart the rebuild from the start and rebuild both devices in
    parallel.

Both options can be argued for.  The code currently takes option 2 as
  a/ this requires least code change
  b/ this results in a minimally-degraded array in minimal time.

Cc: "Eivind Sarto" <ivan@kasenna.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some configurations, a raid6 resync can be limited by CPU speed
(Calculating P and Q and moving data) rather than by device speed.  In
these cases there is nothing to be gained byt serialising resync of arrays
that share a device, and doing the resync in parallel can provide benefit.
 So add a sysfs tunable to flag an array as being allowed to resync in
parallel with other arrays that use (a different part of) the same device.
Signed-off-by: NBernd Schubert <bs@q-leap.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This additional notification to 'array_state' is needed to allow the
monitor application to learn about stop events via sysfs.  The
sysfs_notify("sync_action") call that comes at the end of do_md_stop()
(via md_new_event) is insufficient since the 'sync_action' attribute has
been removed by this point.

(Seems like a sysfs-notify-on-removal patch is a better fix.  Currently
removal updates the event count but does not wake up waiters)
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When an array enters write pending, 'array_state' changes, so we must be
sure to sysfs_notify.

Also, when waiting for user-space to acknowledge 'write-pending' by
marking the metadata as dirty, we don't want to wait for MD_CHANGE_DEVS to
be cleared as that might not happen.  So explicity test for the bits that
we are really interested in.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When performing a "recovery" or "check" pass on a RAID1 array, we read
from each device and possible, if there is a difference or a read error,
write back to some devices.

We use the same 'bio' for both read and write, resetting various fields
between the two operations.

We forgot to reset bv_offset and bv_len however.  These are often left
unchanged, but in the case where there is an IO error one or two sectors
into a page, they are changed.

This results in correctable errors not being corrected properly.  It does
not result in any data corruption.

Cc: "Fairbanks, David" <David.Fairbanks@stratus.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Last night we had scsi problems and a hardware raid unit was offlined
during heavy i/o.  While this happened we got for about 3 minutes a huge
number messages like these

Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2).

I guess the high error rate is responsible for not scheduling other events
- during this time the system was not pingable and in the end also other
devices run into scsi command timeouts causing problems on these unrelated
devices as well.
Signed-off-by: NBernd Schubert <bernd-schubert@gmx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill the trivial and rather pointless file_path wrapper around d_path.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a proper extern for mdp_major in include/linux/raid/md.h
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible to add a write-intent bitmap to an active array, or remove
the bitmap that is there.

When we do with the 'quiesce' the array, which causes make_request to
block in "wait_barrier()".

However we are sampling the value of "mddev->bitmap" before the
wait_barrier call, and using it afterwards.  This can result in using a
bitmap structure that has been freed.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The atomic_t type is 32bit but a 64bit system can have more than 2^32
pages of virtual address space available.  Without this we overflow on
ludicrously large mappings
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

<linux/types.h> can't be used together with <sys/ustat.h> because they
both define struct ustat:

    $ cat test.c
    #include <sys/ustat.h>
    #include <linux/types.h>
    $ gcc -c test.c
    In file included from test.c:2:
    /usr/include/linux/types.h:165: error: redefinition of 'struct ustat'

has been reported a while ago to debian, but seems to have been
lost in cat fighting: http://bugs.debian.org/429064Signed-off-by: Nmaximilian attems <max@stro.at>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>