Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] integrator: fix build warnings and errors
  [ARM] fix OMAP include loops
  Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"
  [ARM] 5053/1: define before use of processor_id
  [ARM] 5052/1: export clock functions for the at91x40
  [ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too
  [ARM] omap: fix omap clk support build errors
  [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.
  [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo
  [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation
  [ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisation
  [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c
  [ARM] 5025/2: fix collie cpu initialisation

arch/arm/mach-at91/at91x40.c

@@ -16,16 +16,32 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/at91x40.h>
 #include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
 #include "generic.h"
 
 /*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
  */
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
 
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)

arch/arm/mach-integrator/impd1.c

@@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
 
 	lm_set_drvdata(dev, impd1);
 
-	printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+	printk("IM-PD1 found at 0x%08lx\n",
+		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
 		impd1->vcos[i].owner = THIS_MODULE,

arch/arm/mach-integrator/pci_v3.c

@@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
 		v3_readb(V3_LB_ISTAT));
 	printk(KERN_DEBUG "%s", buf);
-	printascii(buf);
 #endif
 
 	v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
 	unsigned long pc = instruction_pointer(regs);
 	unsigned long instr = *(unsigned long *)pc;
 	char buf[128];
+	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
 		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,

arch/arm/mach-omap1/board-palmte.c

@@ -24,7 +24,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
@@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #define palmte_get_power_status	NULL
 #endif
 
-static struct tsc2102_config palmte_tsc2102_config = {
-	.use_internal	= 0,
-	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,
-	.temp_at25c	= { 2200, 2615 },
-	.apm_report	= palmte_get_power_status,
-	.alsa_config	= &palmte_alsa_config,
-};
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_MMC,		&palmte_mmc_config },
@@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 		.bus_num	= 2,	/* uWire (officially) */
 		.chip_select	= 0,	/* As opposed to 3 */
 		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
-		.platform_data	= &palmte_tsc2102_config,
 		.max_speed_hz	= 8000000,
 	},
 };

arch/arm/mach-pxa/spitz.c

@@ -38,7 +38,6 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>

arch/arm/mach-s3c2410/mach-bast.c

@@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000A,
 		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
@@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000N,
 		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 };
 

arch/arm/mach-sa1100/collie.c

@@ -225,26 +225,28 @@ static void __init collie_init(void)
 	int ret = 0;
 
 	/* cpu initialize */
-	GAFR = ( GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
-		 GPIO_32_768kHz );
-
-	GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
-		 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
-		 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
-	GPLR = GPIO_GPIO18;
-
-	// PPC pin setting
-	PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
-		 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
-	 	 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
-	PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR  = TUCR_32_768kHz;
+	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+		GPIO_MCP_CLK | GPIO_32_768kHz;
+
+	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+	PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+	PCFR = PCFR_OPDE;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 

arch/arm/plat-omap/clock.c

@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 

arch/arm/plat-s3c24xx/s3c244x.c

@@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
 
 	/* rename any peripherals used differing from the s3c2410 */
 
+	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";

drivers/video/pxafb.c

@@ -1351,7 +1351,6 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
 	struct pxafb_info *fbi;
 	void *addr;
 	struct pxafb_mach_info *inf = dev->platform_data;
-	struct pxafb_mode_info *mode = inf->modes;
 
 	/* Alloc the pxafb_info and pseudo_palette in one step */
 	fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);

include/asm-arm/arch-omap/board-palmte.h

@@ -14,8 +14,6 @@
 #ifndef __OMAP_BOARD_PALMTE_H
 #define __OMAP_BOARD_PALMTE_H
 
-#include <asm/arch/gpio.h>
-
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
 #define PALMTE_TSC_GPIO		4

include/asm-arm/arch-omap/clock.h

@@ -73,6 +73,8 @@ struct clk {
 #endif
 };
 
+struct cpufreq_frequency_table;
+
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@ struct clk_functions {
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
 };
 
 extern unsigned int mpurate;

include/asm-arm/arch-omap/entry-macro.S

@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <asm/hardware.h>
+#include <asm/arch/io.h>
 #include <asm/arch/irqs.h>
 
 #if defined(CONFIG_ARCH_OMAP1)

include/asm-arm/arch-omap/gpio.h

@@ -26,7 +26,6 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
-#include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/io.h>
 

include/asm-arm/arch-omap/hardware.h

@@ -41,7 +41,6 @@
 #include <asm/types.h>
 #include <asm/arch/cpu.h>
 #endif
-#include <asm/arch/io.h>
 #include <asm/arch/serial.h>
 
 /*

include/asm-arm/arch-sa1100/collie.h

@@ -34,9 +34,12 @@
 
 #define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
 #define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
 #define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
 #define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
 #define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
 #define COLLIE_GPIO_CO			GPIO_GPIO (20)
 #define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
 #define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
@@ -49,6 +52,7 @@
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
 #define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
 #define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
 #define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
 #define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20

include/asm-arm/page.h

@@ -179,10 +179,10 @@ typedef unsigned long pgprot_t;
 
 #endif /* STRICT_MM_TYPECHECKS */
 
-typedef struct page *pgtable_t;
-
 #endif /* CONFIG_MMU */
 
+typedef struct page *pgtable_t;
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */

include/asm-arm/system.h

@@ -48,20 +48,6 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
@@ -78,6 +64,21 @@
 #include <linux/stringify.h>
 #include <linux/irqflags.h>
 
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
 /*
  * The CPU ID never changes at run time, so we might as well tell the
  * compiler that it's constant.  Use this function to read the CPU ID