- 09 5月, 2013 12 次提交
-
-
由 Steven J. Hill 提交于
Various whitespace and #ifdef removals for GIC and R4K clocksources. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Reorganize some of the GIC clocksource driver code. Below is a list of the various changes. * No longer select CSRC_GIC by default for Malta platform. * Limit choice for either the GIC or R4K clocksource, not both. * Change location in Makefile. * Created new 'gic_read_count' function in common 'irq-gic.c' file. * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function. * Surround GIC specific code in Malta platform code with #ifdef's. * Only initialize the GIC clocksource if it was selected. Original code called it unconditionally if a GIC was found. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Move the global variable 'gic_frequency' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Move the global variable 'gic_present' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Add logic needed to handle unaligned accesses in MIPS16e mode. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-
由 Steven J. Hill 提交于
Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
This adds the option to build the Linux kernel using only the microMIPS ISA. The resulting kernel binary is, at a minimum, 20% smaller than using the MIPS32R2 ISA. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Douglas Leung 提交于
Support vdso in microMIPS mode. Signed-off-by: NDouglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
-
- 08 5月, 2013 1 次提交
-
-
由 Steven J. Hill 提交于
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 4月, 2013 2 次提交
-
-
由 Deng-Cheng Zhu 提交于
The commit a96102be introduced set_isa() where compatible ISA info is also set aside from the one gets passed in. It means, for example, 1004K will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like the following inappropriate: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || c->isa_level == MIPS_CPU_ISA_M64R1 || c->isa_level == MIPS_CPU_ISA_M64R2) This patch fixes it. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Commit 58b69401 [MIPS: Function tracer: Fix broken function tracing] completely broke the function tracer for 64-bit kernels. The symptom is a system hang very early in the boot process. The fix: Remove/fix $sp adjustments for 64-bit case. Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Al Cooper <alcooperx@gmail.com> Cc: viric@viric.name Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 3月, 2013 1 次提交
-
-
由 Florian Fainelli 提交于
Commit 32a7ede6 (MIPS: dsp: Add assembler support for DSP ASEs) has enabled the use of DSP ASE specific instructions such as rddsp and wrdsp under the idea that all code path that will make use of these two instructions are properly checking for cpu_has_dsp to ensure that the particular CPU we are running on *actually* supports DSP ASE. This commit actually causes the following oops on QEMU Malta emulating a MIPS 24Kc without the DSP ASE implemented: [ 7.960000] Reserved instruction in kernel [ 7.960000] Cpu 0 [ 7.960000] $ 0 : 00000000 00000000 00000014 00000005 [ 7.960000] $ 4 : 8fc2de48 00000001 00000000 8f59ddb0 [ 7.960000] $ 8 : 8f5ceec4 00000018 00000c00 00800000 [ 7.960000] $12 : 00000100 00000200 00000000 00457b84 [ 7.960000] $16 : 00000000 8fc2ba78 8f4ec980 00000001 [ 7.960000] $20 : 80418f90 00000000 00000000 000002dd [ 7.960000] $24 : 0000009c 7730d7b8 [ 7.960000] $28 : 8f59c000 8f59dd38 00000001 80104248 [ 7.960000] Hi : 0000001d [ 7.960000] Lo : 0000000b [ 7.960000] epc : 801041ec thread_saved_pc+0x2c/0x38 [ 7.960000] Not tainted [ 7.960000] ra : 80104248 get_wchan+0x48/0xac [ 7.960000] Status: 1000b703 KERNEL EXL IE [ 7.960000] Cause : 10800028 [ 7.960000] PrId : 00019300 (MIPS 24Kc) [ 7.960000] Modules linked in: [ 7.960000] Process killall (pid: 1574, threadinfo=8f59c000, task=8fd14558, tls=773aa440) [ 7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000 00000000 8f58a380 8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28 801b2a3c 8f59df00 8f98ba20 74696e69 8f468600 8f59de28 801b7308 0081c007 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc 7fe80648 ffffffff ffffffff 00000000 00000001 0016e000 00000000 ... [ 7.960000] Call Trace: [ 7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38 [ 7.960000] [<80104248>] get_wchan+0x48/0xac The disassembly of thread_saved_pc points to the following: 000006d0 <thread_saved_pc>: 6d0: 8c820208 lw v0,520(a0) 6d4: 3c030000 lui v1,0x0 6d8: 24630000 addiu v1,v1,0 6dc: 10430008 beq v0,v1,700 <thread_saved_pc+0x30> 6e0: 00000000 nop 6e4: 3c020000 lui v0,0x0 6e8: 8c43000c lw v1,12(v0) 6ec: 04620004 bltzl v1,700 <thread_saved_pc+0x30> 6f0: 00001021 move v0,zero 6f4: 8c840200 lw a0,512(a0) 6f8: 00031080 sll v0,v1,0x2 6fc: 7c44100a lwx v0,a0(v0) <------------ 700: 03e00008 jr ra 704: 00000000 nop If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o, we get the following (non-crashing) assembly: 00000708 <thread_saved_pc>: 708: 8c820208 lw v0,520(a0) 70c: 3c030000 lui v1,0x0 710: 24630000 addiu v1,v1,0 714: 10430009 beq v0,v1,73c <thread_saved_pc+0x34> 718: 00000000 nop 71c: 3c020000 lui v0,0x0 720: 8c42000c lw v0,12(v0) 724: 04420005 bltzl v0,73c <thread_saved_pc+0x34> 728: 00001021 move v0,zero 72c: 8c830200 lw v1,512(a0) 730: 00021080 sll v0,v0,0x2 734: 00431021 addu v0,v0,v1 738: 8c420000 lw v0,0(v0) 73c: 03e00008 jr ra 740: 00000000 nop The specific line that leads a different assembly being produced is: unsigned long thread_saved_pc(struct task_struct *tsk) ... return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <--- The problem here is that the compiler was given the right to use DSP instructions with the -mdsp / -mdspr2 command-line switches and performed some optimization for us and used DSP ASE instructions where we are not checking that the running CPU actually supports DSP ASE. This patch fixes the issue by partially reverting commit 32a7ede6 for arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2 compiler command-line switches such that we are now guaranteed that the compiler will not optimize using DSP ASE reserved instructions. We also need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in arch/mips/include/asm/mipsregs.h to tell the assembler that we are going to explicitely use DSP ASE reserved instructions. The comment in arch/mips/kernel/Makefile is also updated to reflect that. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 14 3月, 2013 1 次提交
-
-
由 John Crispin 提交于
There is a missing " " inside /proc/cpuinfo. The bad commit was: commit a96102be Author: Steven J. Hill <sjhill@mips.com> Date: Fri Dec 7 04:31:36 2012 +0000 MIPS: Add printing of ISA version in cpuinfo. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4988/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 13 3月, 2013 1 次提交
-
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4963/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 11 3月, 2013 1 次提交
-
-
由 Ralf Baechle 提交于
The pains for multiplexed syscalls. Noticed by Al Viro <viro@zeniv.linux.org.uk>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 19 2月, 2013 6 次提交
-
-
由 John Crispin 提交于
The commit [1] breaks builds and results in the following error arch/mips/kernel/vpe.c: In function 'vpe_run': arch/mips/kernel/vpe.c:708:16: error: invalid type argument of '->' (have 'struct list_head') Taking a closer look at the conditional we notice that list_first_entry wont ever return NULL. The easiest fix is to just drop the dead code. [1] commit 3d2d0324 MIPS: vpe.c: Fix null pointer dereference in print arguments. Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 Florian Fainelli 提交于
This patch fixes the following implicit declaration while building with MIPS SMTC support enabled: arch/mips/kernel/smtc.c: In function 'setup_cross_vpe_interrupts': arch/mips/kernel/smtc.c:1205:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4931/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 Aaro Koskinen 提交于
We cannot use __init for earlyprintk code or data, since the kernel parameter "keep_bootcon" allows leaving the boot console enabled. Currently MIPS will crash/hang/die if you use keep_bootcon. The patch fixes it at least on Lemote FuLoong mini-PC. Changes for other boards were done based on what I could find with grep... Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Patchwork: http://patchwork.linux-mips.org/patch/4935/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 David Daney 提交于
The presence of the MIPS Virtualization Application-Specific Extension is indicated by CP0_Config3[23]. Probe for this and report it in /proc/cpuinfo. Signed-off-by: NDavid Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4904/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 Corey Minyard 提交于
/proc/vmcore wasn't showing up in kdump kernels. It turns that that for Octeon, the memory used by elfcorehdr wasn't being set aside properly and it was getting clobbered before /proc/vmcore could get it. So reserve the memory if it shows up in a memory area managed by the kernel. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/4936/
-
由 Corey Minyard 提交于
Kernel memory isn't necessarily added to the memory tables, so it wouldn't show up in /proc/iomem. This was breaking kdump, which requires these memory addresses to work correctly. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/4937/
-
- 17 2月, 2013 5 次提交
-
-
由 Gabor Juhos 提交于
Add code to load a irq_domain for the MIPS IRQ controller from a devicetree file. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn Crispin <blogic@openwrt.org> Acked-by: NDavid Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4902/
-
由 Steven J. Hill 提交于
Add new clocksource that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4681/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 Steven J. Hill 提交于
Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4752/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 Steven J. Hill 提交于
Signed-off-by: NSteven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4682/Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
由 John Crispin 提交于
Make sure 24KEc is properly identified inside /proc/cpuinfo Signed-off-by: NJohn Crispin <blogic@openwrt.org>
-
- 16 2月, 2013 2 次提交
-
-
由 Steven J. Hill 提交于
Display the MIPS ISA version release in the /proc/cpuinfo file. [ralf@linux-mips.org: Add support for MIPS I ... IV legacy architecture revisions. Also differenciate between MIPS32 and MIPS64 versions instead of lumping them together as just r1 and r2. Note to application programmers: this indicates the CPU's ISA level It does not imply the current execution environment does support it. For example an O32 application seeing "mips64r2" would still be restricted by by the execution environment to 32-bit - but the kernel could run mips64r2 code. The same for a 32-bit kernel running on a 64-bit processor. This field doesn't include ASEs or optional architecture modules nor other detailed flags such as the availability of an FPU.] Signed-off-by: NSteven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/4714/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Julia Lawall 提交于
A struct clk value is intended to be an abstract pointer, so it should be manipulated using the various API functions. clk_put is additionally added on the failure paths. The semantic match that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; identifier i; @@ *e = clk_get(...) ... when != e = e1 when any *e->i // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org, Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4751/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 04 2月, 2013 5 次提交
-
-
由 Al Viro 提交于
we still need the wrappers to store callee-saved registers in pt_regs, but once that done we can jump to kernel/fork.c variants. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
current_pt_regs() works just fine Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... it's COMPAT_SYSCALL_DEFINE now Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-