MIPS: dsp: Add assembler support for DSP ASEs.

Newer toolchains support the DSP and DSP Rev2 instructions. This patch
performs a check for that support and adds compiler and assembler
flags for only the files that need use those instructions.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4752/Signed-off-by: NJohn Crispin <blogic@openwrt.org>

arch/mips/include/asm/mipsregs.h

@@ -1155,36 +1155,26 @@ do {									\
         : "=r" (__res));                                        \
         __res;})
 
+#ifdef HAVE_AS_DSP
 #define rddsp(mask)							\
 ({									\
-	unsigned int __res;						\
+	unsigned int __dspctl;						\
 									\
 	__asm__ __volatile__(						\
-	"	.set	push				\n"		\
-	"	.set	noat				\n"		\
-	"	# rddsp $1, %x1				\n"		\
-	"	.word	0x7c000cb8 | (%x1 << 16)	\n"		\
-	"	move	%0, $1				\n"		\
-	"	.set	pop				\n"		\
-	: "=r" (__res)							\
+	"	rddsp	%0, %x1					\n"	\
+	: "=r" (__dspctl)						\
 	: "i" (mask));							\
-	__res;								\
+	__dspctl;							\
 })
 
 #define wrdsp(val, mask)						\
 do {									\
 	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# wrdsp $1, %x1					\n"	\
-	"	.word	0x7c2004f8 | (%x1 << 11)		\n"	\
-	"	.set	pop					\n"	\
-        :								\
+	"	wrdsp	%0, %x1					\n"	\
+	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#if 0	/* Need DSP ASE capable assembler ... */
 #define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
 #define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
 #define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
@@ -1207,6 +1197,35 @@ do {									\
 
 #else
 
+#define rddsp(mask)							\
+({									\
+	unsigned int __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push				\n"		\
+	"	.set	noat				\n"		\
+	"	# rddsp $1, %x1				\n"		\
+	"	.word	0x7c000cb8 | (%x1 << 16)	\n"		\
+	"	move	%0, $1				\n"		\
+	"	.set	pop				\n"		\
+	: "=r" (__res)							\
+	: "i" (mask));							\
+	__res;								\
+})
+
+#define wrdsp(val, mask)						\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# wrdsp $1, %x1					\n"	\
+	"	.word	0x7c2004f8 | (%x1 << 11)		\n"	\
+	"	.set	pop					\n"	\
+        :								\
+	: "r" (val), "i" (mask));					\
+} while (0)
+
 #define mfhi0()								\
 ({									\
 	unsigned long __treg;						\

arch/mips/kernel/Makefile

@@ -98,4 +98,35 @@ obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
+#
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
+# to enable DSP assembler support here even if the MIPS Release 2 CPU we
+# are targetting does not support DSP because all code-paths making use of
+# it properly check that the running CPU *actually does* support these
+# instructions.
+#
+ifeq ($(CONFIG_CPU_MIPSR2), y)
+CFLAGS_DSP 			= -DHAVE_AS_DSP
+
+#
+# Check if assembler supports DSP ASE
+#
+ifeq ($(call cc-option-yn,-mdsp), y)
+CFLAGS_DSP			+= -mdsp
+endif
+
+#
+# Check if assembler supports DSP ASE Rev2
+#
+ifeq ($(call cc-option-yn,-mdspr2), y)
+CFLAGS_DSP			+= -mdspr2
+endif
+
+CFLAGS_signal.o			= $(CFLAGS_DSP)
+CFLAGS_signal32.o		= $(CFLAGS_DSP)
+CFLAGS_process.o		= $(CFLAGS_DSP)
+CFLAGS_branch.o			= $(CFLAGS_DSP)
+CFLAGS_ptrace.o			= $(CFLAGS_DSP)
+endif
+
 CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)