The HP pin (0x16) control has to be changed dynamically depending on
the master volume switch as well as the speaker pin (0x1a).  Otherwise
the headphone still sounds with master off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the wrongly set up for SPDIF output on Conexant 5051 codec.
It must point to the audio out widget instead of a pin.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Initialize the mic ports B & C on Conexant 5051 codec dynamically
according to the mic jack detection, instead of static init arrays.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All cx5051 codec models have the same Master playback mixer definitions.
Merge them together.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the support for Toshiba Satellite M300 with Conexant 5051 codec.
Since the laptop has no port C connection and the pin reports always
the jack sense true, we need to ignore port-C unsol event.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the standard "Capture" mixer name for HP dv6736 with Cxt5051 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Minor fixes for HP Compaq Presario F700 quirks with Cxt5051 codec:
- changed the capture mixer elements to the standard name.
- fixed the quirk name string without a space
- sorted the quirk list
- updated the documentation
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some codecs disable widgets used for output pins and reserve as vendor-
spec widgets.  Thus we need to check the widget type and pin cap before
actually sending SET_EAPD verbs in the auto-configuration mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled
properly in alc268_new_analog_output().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the
recording doesn't work with model=auto because ALC262 parser sets the
wrong cap NIDs to choose the route and the default route for the sole
input pin wasn't initialized properly.  This patch solves these issues.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On my laptop (HP dv6-1110ax), there are no OEM strings in SMBIOS of type
"HP_Mute_LED*". Hence, the GPIO for the mute button LED doesn't get set
properly. I didn't find the strings in my cousin's laptop (HP dv9500t CTO)
either.

As per the documentation of find_mute_led_gpio(), these strings occur
in HP B-series systems - so, before scanning the SMBIOS strings, we need to
check if we're dealing with a B-series system.
Need to get confirmation from HP if this logic takes care of all the
systems. I'm trying to poke a friend there.
Signed-off-by: NKunal Gangakhedkar <kunal.gangakhedkar@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The capture-related mixer elements are missing with ALC861/ALC660 codecs
when quirks are present, due to missing call of set_capture_mixer().

Reference: Novell bnc#567340
	http://bugzilla.novell.com/show_bug.cgi?id=567340Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

This patch adds support for automatically muting the speakers when headphones
are inserted, as well as relabelling the headphone widgets from the
non-standard "HP" to the standard "Headphone" for the mb5 model.
Signed-off-by: NAlex Murray <murray.alex@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The alc664-mode4 model doesn't seem to fit with Toshiba NB205 correctly.
NB205 uses the pin 0x17 connected with the mixer 0x0f for the speaker
output, which isn't controlled by mode4 model at all.
Rather model=auto works fine as is on the latest driver, so let it back
again.
Tested-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the Intel Cougar Point (PCH) HD Audio Controller DeviceIDs.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The capture source or input source mixer element wasn't created properly
for ALC861-VD codec due to the wrong NID passed to
alc_auto_create_input_ctls().

References: Novell bnc#568305
	http://bugzilla.novell.com/show_bug.cgi?id=568305Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

Add the STMicroelectronics ST7597 codec and an unknown codec
from the same manufacturer found on the Creative SB 128 card (CT4810).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This model needs both 'Headphone Jack Sense' and 'Line Jack Sense' muted
for audible playback, so just add it to the ad1981 jack sense blacklist.

Cc: stable@kernel.org
Tested-by: NPete <x41215201@gmail.com>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The XO's audio hardware is wired up to allow DC sensors (e.g. light
sensors, thermistors, etc) to be plugged in through the microphone jack.

Add sound mixer controls to allow this mode to be enabled and tweaked.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The XO-1.5 has a microphone LED designed to indicate to the user when
something is being recorded.

This light is controlled by the microphone bias voltage and it is
currently coming on all the time.

This patch defers the microphone port configuration until when recording
is actually taking place, fixing the behaviour of the LED.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added patch for Hewlett-Packard Company Device Subsystem id - 103c:30ea.
Signed-off-by: NKen Prox <kprox@users.sourceforge.net>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The WM9705 and WM9703 ops are the same actually so use
the same code for both.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch converts the alc889 Aspire-specific powerdown to a generic
one. Like the previous effort, it currently only handles Front and PCM
but can be easily extended to cover other nids. The existing hook for
alc889 Aspire-specific remains enabled. Upon further testing, I've added
its use for ALC861_AUTO as well. Following patches will enable them for
other quirks.
Tested-by: NDr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch ports powerdown fixes to AD198x. Currently we only turn off
Front and HP for suspend, but this is easily extended for additional
nids.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With `while (i++ < MAX_WRITE_RETRY)' i reaches MAX_WRITE_RETRY + 1 after the loop
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/ubuntu/+bug/498863

This mainboard needs ac97_codec=0.

Cc: stable@kernel.org
Tested-by: NApoorv Parle <apparle@yahoo.co.in>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rewrite the codes to use strict_strtoul() instead of simple_strtoul().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check whether the given NID is a pin widget before storing the
user-defined pin configs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call snd_hda_shutup_pins() at suspend and free for avoiding click noises.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a common helper function for clearing pin controls before suspend.
Use the pincfg array instead of looking through all widget tree.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent change for supporting dynamic beep device allocation caused
a problem resulting in Oops at reloading the driver.  Also, it ignores
the error from input device registration.

This patch fixes the wrong check in snd_hda_detach_beep_device(), and
returns an error when the input device registration fails properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The beep control verbs don't need to be cached for resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

gpio_led, gpio_led_polarity and gpio_mute are added now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use snd_hda_jack_detect() again for jack-sensing.
The triggering problem can be worked around with codec->no_trigger_sense
flag now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Analog Device codecs seem to have problems with the triggering of
pin-sensing although their pincaps give the trigger requirements.
Some reported that constant CPU load on HP laptops with AD codecs.

For avoiding this regression, add a flag to codec struct to notify
explicitly that the codec doesn't suppot the trigger at pin-sensing.
Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we run the following commands in turn (with
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0),

	speaker-test -Dhw:0,3 -c2 -twav  # HDMI
	speaker-test -Dhw:0,0 -c2 -twav  # Analog

The second command will produce sound in the analog lineout _as well as_
HDMI sink. The root cause is, device 0 "reuses" the same stream tag that
was used by device 3, and the "intelhdmi - sticky stream id" patch leaves
the HDMI codec in a functional state. So the HDMI codec happily accepts
the audio samples which reuse its stream tag.

The proposed solution is to remember the last device each azx_dev was
assigned to, and prefer to
1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used
2) or assign a never-used azx_dev for HDMI

With this patch and the above two speaker-test commands,
HDMI codec will use stream tag 8 and Analog codec will use 5.

The stream tag used by HDMI codec won't be reused by others, as long
as we don't run out of the 4 playback azx_dev's. The legacy Analog
codec will continue to use stream tag 5 because its device id is 0
(this is a bit tricky).
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Postpone the mixer name setup after the codec patch since the codec
patch may change the codec name string in itself.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the wrong implementation of NID <-> kctl mapping for capture mixers
introduced by the ocmmit 5b0cb1d8.
So far, the driver returns an error at probe.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The bass speaker is controlled via GPIO5.
Tested-by: NWael Nasreddine <mla@nasreddine.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>