ALSA: hda - Add Bass Speaker switch for HP dv7

The bass speaker is controlled via GPIO5.
Tested-by: NWael Nasreddine <mla@nasreddine.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/pci/hda/patch_sigmatel.c

@@ -5402,6 +5402,54 @@ static int stac92hd71bxx_connected_smuxes(struct hda_codec *codec,
 		return 0;
 }
 
+/* HP dv7 bass switch - GPIO5 */
+#define stac_hp_bass_gpio_info	snd_ctl_boolean_mono_info
+static int stac_hp_bass_gpio_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+	ucontrol->value.integer.value[0] = !!(spec->gpio_data & 0x20);
+	return 0;
+}
+
+static int stac_hp_bass_gpio_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+	unsigned int gpio_data;
+
+	gpio_data = (spec->gpio_data & ~0x20) |
+		(ucontrol->value.integer.value[0] ? 0x20 : 0);
+	if (gpio_data == spec->gpio_data)
+		return 0;
+	spec->gpio_data = gpio_data;
+	stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data);
+	return 1;
+}
+
+static struct snd_kcontrol_new stac_hp_bass_sw_ctrl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info = stac_hp_bass_gpio_info,
+	.get = stac_hp_bass_gpio_get,
+	.put = stac_hp_bass_gpio_put,
+};
+
+static int stac_add_hp_bass_switch(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (!stac_control_new(spec, &stac_hp_bass_sw_ctrl,
+			      "Bass Speaker Playback Switch", 0))
+		return -ENOMEM;
+
+	spec->gpio_mask |= 0x20;
+	spec->gpio_dir |= 0x20;
+	spec->gpio_data |= 0x20;
+	return 0;
+}
+
 static int patch_stac92hd71bxx(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
@@ -5642,6 +5690,15 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
 		return err;
 	}
 
+	/* enable bass on HP dv7 */
+	if (spec->board_config == STAC_HP_DV5) {
+		unsigned int cap;
+		cap = snd_hda_param_read(codec, 0x1, AC_PAR_GPIO_CAP);
+		cap &= AC_GPIO_IO_COUNT;
+		if (cap >= 6)
+			stac_add_hp_bass_switch(codec);
+	}
+
 	codec->proc_widget_hook = stac92hd7x_proc_hook;
 
 	return 0;