Signed-off-by: NDavid Henningsson <diwic@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a follow on patch adds support for AMD based Lenovo G series
machines, such as the Lenovo G555.
Signed-off-by: NJerone Young <jerone.young@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some VAIO models with ALC275 have dual ADCs for both internal and external
mics, and the driver needs to switch one of them appropriately.
This patch adds a basic support for this functionality, dynamic switching
between two ADCs per jack plug state.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Correctly configure bidirectional pins when resuming; do not power down
widgets when they are needed for Smart5.1 output; and on 3-jack boards,
create the streams and controls needed for six channels.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: NViliam Kubis <viliam.kubis@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the amp max value at put callbacks and set the upper limit
so that the driver won't write any invalid value over the defined
range.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the beep mixer controls to Conexant codecs.
They simply control the digital beep generator widget.

For cx5047, I couldn't find any beep generator, so it's not implemented
there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the PCI SSID gives an overriding SKU assno, PC-beep bit isn't
detected (since it's located over 16bit), resulting in no PC beep.
Also, many devices seem ignoring the requirement by Realtek's spec
for SSID numbers, and it also confuses the PC beep detection.

This patch assumes the PC beep is available on every machine with
PCI SSID override.  It's a regression fix from 2.6.34.

Reference: Kernel bug 16251
	http://bugzilla.kernel.org/show_bug.cgi?id=16251Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also update the documentation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/463178

Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5

Cc: <stable@kernel.org>
Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the following compile warning.  kctl should be NULL-initialized.

  sound/pci/hda/patch_realtek.c: In function ‘alc_build_controls’:
  sound/pci/hda/patch_realtek.c:2550:23: warning: ‘kctl’ may be used uninitialized in this function
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo IdeaPad Y430 has an additional subwoofer connected at pin 0x1b,
which isn't muted when headphone is plugged in. This adds additional
support to the extra subwoofer via new ideapad model.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The line-in input is 0x7 not 0x2 for MacBook (Pro) 5,1 / 5,2 models
Signed-off-by: NAlex Murray <murray.alex@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With multiple codec configurations, some codec might have no ADC, thus
it keeps spec->adc_nids = NULL.  This causes an Oops in alc_build_controls().

Reference: kernel bug #16156
	https://bugzilla.kernel.org/show_bug.cgi?id=16156

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch add's the iMac7,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/360866

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch add's the MacBookAir1,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/268301

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds the SSID number to snd_pci_quirk for the
MacBookAir2,1 taken from codec#0 at:
    http://launchpadlibrarian.net/49455483/Card0.Codecs.codec.0.txt

keep in mind I do not have one of these machines on hand
so please if you do have this machine please test for me..
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags
  ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files

A few functions were still modifying i_flags in a racy manner.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: improve xfs_isilocked
  xfs: skip writeback from reclaim context
  xfs: remove done roadmap item from xfs-delayed-logging-design.txt
  xfs: fix race in inode cluster freeing failing to stale inodes
  xfs: fix access to upper inodes without inode64
  xfs: fix might_sleep() warning when initialising per-ag tree
  fs/xfs/quota: Add missing mutex_unlock
  xfs: remove duplicated #include
  xfs: convert more trace events to DEFINE_EVENT
  xfs: xfs_trace.c: remove duplicated #include
  xfs: Check new inode size is OK before preallocating
  xfs: clean up xlog_align
  xfs: cleanup log reservation calculactions
  xfs: be more explicit if RT mount fails due to config
  xfs: replace E2BIG with EFBIG where appropriate

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  X25: remove duplicated #include
  tcp: use correct net ns in cookie_v4_check()
  rps: tcp: fix rps_sock_flow_table table updates
  ppp_generic: fix multilink fragment sizes
  syncookies: remove Kconfig text line about disabled-by-default
  ixgbe: only check pfc bits in hang logic if pfc is enabled
  net: check for refcount if pop a stacked dst_entry
  ixgbe: return IXGBE_ERR_RAR_INDEX when out of range
  act_pedit: access skb->data safely
  sfc: Store port number in net_device::dev_id
  epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN
  tehuti: return -EFAULT on copy_to_user errors
  isdn/kcapi: return -EFAULT on copy_from_user errors
  e1000e: change logical negate to bitwise
  sfc: Get port number from CS_PORT_NUM, not PCI function number
  cls_u32: use skb_header_pointer() to dereference data safely
  TCP: tcp_hybla: Fix integer overflow in slow start increment
  act_nat: fix the wrong checksum when addr isn't in old_addr/mask
  net/fec: fix pm to survive to suspend/resume
  korina: count RX DMA OVR as rx_fifo_error
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: remove obsolete declarations of cache constructor and destructor
  nilfs2: fix style issue in nilfs_destroy_cachep

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Minix: Clean up left over label
  fix truncate inode time modification breakage
  fix setattr error handling in sysfs, configfs
  fcntl: return -EFAULT if copy_to_user fails
  wrong type for 'magic' argument in simple_fill_super()
  fix the deadlock in qib_fs
  mqueue doesn't need make_bad_inode()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix bne2 "gave up waiting for init of module libcrc32c"
  module: verify_export_symbols under the lock
  module: move find_module check to end
  module: make locking more fine-grained.
  module: Make module sysfs functions private.
  module: move sysfs exposure to end of load_module
  module: fix kdb's illicit use of struct module_use.
  module: Make the 'usage' lists be two-way

Problem: it's hard to avoid an init routine stumbling over a
request_module these days.  And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.

In this particular case, it's libcrc32c:

	libcrc32c_mod_init
	 crypto_alloc_shash
	  crypto_alloc_tfm
	   crypto_find_alg
	    crypto_alg_mod_lookup
	     crypto_larval_lookup
	      request_module

If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.

Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock.  Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.

Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
   symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
   external user (the out-of-tree ksplice patches).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Abbot <tabbott@ksplice.com>
Tested-by: NBrandon Philips <bphilips@suse.de>

It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.

So we check this just after we check for duplicate modules, and just
before we put the module in the global list.

(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).

Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.

In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Kay Sievers <kay.sievers@vrfy.org> reports that we still have some
contention over module loading which is slowing boot.

Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.

This is more ambitious: we only grab the lock where we need it.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>

These were placed in the header in ef665c1a to get the various
SYSFS/MODULE config combintations to compile.

That may have been necessary then, but it's not now.  These functions
are all local to module.c.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>

This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.

This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Linus changed the structure, and luckily this didn't compile any more.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>

When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.

It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".

In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module.  But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.

By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)

Remove duplicated #include('s) in drivers/net/wan/x25_asy.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its better to make a route lookup in appropriate namespace.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I believe a moderate SYN flood attack can corrupt RFS flow table
(rps_sock_flow_table), making RPS/RFS much less effective.

Even in a normal situation, server handling short lived sessions suffer
from bad steering for the first data packet of a session, if another SYN
packet is received for another session.

We do following action in tcp_v4_rcv() :

	sock_rps_save_rxhash(sk, skb->rxhash);

We should _not_ do this if sk is a LISTEN socket, as about each
packet received on a LISTEN socket has a different rxhash than
previous one.
 -> RPS_NO_CPU markers are spread all over rps_sock_flow_table.

Also, it makes sense to protect sk->rxhash field changes with socket
lock (We currently can change it even if user thread owns the lock
and might use rxhash)

This patch moves sock_rps_save_rxhash() to a sock locked section,
and only for non LISTEN sockets.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix bug in multilink fragment size calculation introduced by
commit 9c705260
"ppp: ppp_mp_explode() redesign"
Signed-off-by: NBen McKeegan <ben@netservers.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>