提交 3507e2a8 编写于 作者: T Takashi Iwai

ALSA: hda - Add beep mixer support to Conexant codecs

Added the beep mixer controls to Conexant codecs.
They simply control the digital beep generator widget.

For cx5047, I couldn't find any beep generator, so it's not implemented
there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 d4a86d81
......@@ -131,6 +131,8 @@ struct conexant_spec {
unsigned int dc_enable;
unsigned int dc_input_bias; /* offset into cxt5066_olpc_dc_bias */
unsigned int mic_boost; /* offset into cxt5066_analog_mic_boost */
unsigned int beep_amp;
};
static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
......@@ -515,6 +517,15 @@ static struct snd_kcontrol_new cxt_capture_mixers[] = {
{}
};
#ifdef CONFIG_SND_HDA_INPUT_BEEP
/* additional beep mixers; the actual parameters are overwritten at build */
static struct snd_kcontrol_new cxt_beep_mixer[] = {
HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT),
HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT),
{ } /* end */
};
#endif
static const char *slave_vols[] = {
"Headphone Playback Volume",
"Speaker Playback Volume",
......@@ -580,6 +591,23 @@ static int conexant_build_controls(struct hda_codec *codec)
return err;
}
#ifdef CONFIG_SND_HDA_INPUT_BEEP
/* create beep controls if needed */
if (spec->beep_amp) {
struct snd_kcontrol_new *knew;
for (knew = cxt_beep_mixer; knew->name; knew++) {
struct snd_kcontrol *kctl;
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
return -ENOMEM;
kctl->private_value = spec->beep_amp;
err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
}
}
#endif
return 0;
}
......@@ -590,6 +618,13 @@ static struct hda_codec_ops conexant_patch_ops = {
.free = conexant_free,
};
#ifdef CONFIG_SND_HDA_INPUT_BEEP
#define set_beep_amp(spec, nid, idx, dir) \
((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir))
#else
#define set_beep_amp(spec, nid, idx, dir) /* NOP */
#endif
/*
* EAPD control
* the private value = nid | (invert << 8)
......@@ -1130,9 +1165,10 @@ static int patch_cxt5045(struct hda_codec *codec)
spec->num_init_verbs = 1;
spec->init_verbs[0] = cxt5045_init_verbs;
spec->spdif_route = 0;
spec->num_channel_mode = ARRAY_SIZE(cxt5045_modes),
spec->channel_mode = cxt5045_modes,
spec->num_channel_mode = ARRAY_SIZE(cxt5045_modes);
spec->channel_mode = cxt5045_modes;
set_beep_amp(spec, 0x16, 0, 1);
codec->patch_ops = conexant_patch_ops;
......@@ -1211,6 +1247,9 @@ static int patch_cxt5045(struct hda_codec *codec)
break;
}
if (spec->beep_amp)
snd_hda_attach_beep_device(codec, spec->beep_amp);
return 0;
}
......@@ -1987,6 +2026,8 @@ static int patch_cxt5051(struct hda_codec *codec)
spec->cur_adc = 0;
spec->cur_adc_idx = 0;
set_beep_amp(spec, 0x13, 0, HDA_OUTPUT);
codec->patch_ops.unsol_event = cxt5051_hp_unsol_event;
board_config = snd_hda_check_board_config(codec, CXT5051_MODELS,
......@@ -2021,6 +2062,9 @@ static int patch_cxt5051(struct hda_codec *codec)
break;
}
if (spec->beep_amp)
snd_hda_attach_beep_device(codec, spec->beep_amp);
return 0;
}
......@@ -2636,7 +2680,6 @@ static struct snd_kcontrol_new cxt5066_vostro_mixers[] = {
.put = cxt5066_mic_boost_mux_enum_put,
.private_value = 0x23 | 0x100,
},
HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0x13, 1, 0x0, HDA_OUTPUT),
{}
};
......@@ -3034,6 +3077,8 @@ static int patch_cxt5066(struct hda_codec *codec)
spec->cur_adc = 0;
spec->cur_adc_idx = 0;
set_beep_amp(spec, 0x13, 0, HDA_OUTPUT);
board_config = snd_hda_check_board_config(codec, CXT5066_MODELS,
cxt5066_models, cxt5066_cfg_tbl);
switch (board_config) {
......@@ -3082,7 +3127,6 @@ static int patch_cxt5066(struct hda_codec *codec)
spec->port_d_mode = 0;
spec->dell_vostro = 1;
spec->mic_boost = 3; /* default 30dB gain */
snd_hda_attach_beep_device(codec, 0x13);
/* no S/PDIF out */
spec->multiout.dig_out_nid = 0;
......@@ -3124,6 +3168,9 @@ static int patch_cxt5066(struct hda_codec *codec)
break;
}
if (spec->beep_amp)
snd_hda_attach_beep_device(codec, spec->beep_amp);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册