- 04 11月, 2011 9 次提交
-
-
由 Guennadi Liakhovetski 提交于
A possibility to preallocate and initialise buffers of different sizes in V4L2 is required for an efficient implementation of a snapshot mode. This patch adds two new ioctl()s: VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF and defines respective data structures. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
This patch prepares for a better separation of the buffer preparation stage. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
soc-camera has been completely ported over to V4L2 subdevice mbus-config operations, soc-camera client bus-param operations and supporting code can now be removed. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
With the new subdevice media-bus configuration methods bus-width is not configured along with other bus parameters, instead, it is derived from the data format. With those methods it is convenient to specify supported bus-widths in the platform data as (1 << (width - 1)). We redefine SOCAM_DATAWIDTH_* flags to use the same convention to make platform data seemlessly reusable. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Macros, defined in a header under include/ should be kept in a local namespace and not pollute the global one. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Add helper functions to process the new media bus configuration type similar to soc_camera_apply_sensor_flags() and soc_camera_bus_param_compatible(). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 10月, 2011 3 次提交
-
-
由 Jonathan Cameron 提交于
Reimplemented at least 17 times discounting error mangling cases where it could be used. Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Christian Ehrhardt 提交于
Implement sigp external call, which might be required for guests that issue an external call instead of an emergency signal for IPI. This fixes an issue with "KVM: unknown SIGP: 0x02" when booting such an SMP guest. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Eric Dumazet 提交于
commit 2425717b (net: allow vlan traffic to be received under bond) broke ARP processing on vlan on top of bonding. +-------+ eth0 --| bond0 |---bond0.103 eth1 --| | +-------+ 52870.115435: skb_gro_reset_offset <-napi_gro_receive 52870.115435: dev_gro_receive <-napi_gro_receive 52870.115435: napi_skb_finish <-napi_gro_receive 52870.115435: netif_receive_skb <-napi_skb_finish 52870.115435: get_rps_cpu <-netif_receive_skb 52870.115435: __netif_receive_skb <-netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: bond_handle_frame <-__netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: arp_rcv <-__netif_receive_skb 52870.115436: kfree_skb <-arp_rcv Packet is dropped in arp_rcv() because its pkt_type was set to PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103 exists. We really need to change pkt_type only if no more rx_handler is about to be called for the packet. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2011 1 次提交
-
-
由 Kalle Valo 提交于
When compiling ath6kl for beagleboard (omap2plus_defconfig plus CONFIG_ATH6KL, CONFIG_OF disable) with current linux-next compilation fails: include/linux/of.h:269: error: 'ENOSYS' undeclared (first use in this function) include/linux/of.h:276: error: 'ENOSYS' undeclared (first use in this function) include/linux/of.h:289: error: 'ENOSYS' undeclared (first use in this function) Fix this by including errno.h from of.h. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 28 10月, 2011 6 次提交
-
-
由 Andi Kleen 提交于
Add a generic_file_llseek variant to the VFS that allows passing in the maximum file size of the file system, instead of always using maxbytes from the superblock. This can be used to eliminate some cut'n'paste seek code in ext4. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Andi Kleen 提交于
The i_mutex lock use of generic _file_llseek hurts. Independent processes accessing the same file synchronize over a single lock, even though they have no need for synchronization at all. Under high utilization this can cause llseek to scale very poorly on larger systems. This patch does some rethinking of the llseek locking model: First the 64bit f_pos is not necessarily atomic without locks on 32bit systems. This can already cause races with read() today. This was discussed on linux-kernel in the past and deemed acceptable. The patch does not change that. Let's look at the different seek variants: SEEK_SET: Doesn't really need any locking. If there's a race one writer wins, the other loses. For 32bit the non atomic update races against read() stay the same. Without a lock they can also happen against write() now. The read() race was deemed acceptable in past discussions, and I think if it's ok for read it's ok for write too. => Don't need a lock. SEEK_END: This behaves like SEEK_SET plus it reads the maximum size too. Reading the maximum size would have the 32bit atomic problem. But luckily we already have a way to read the maximum size without locking (i_size_read), so we can just use that instead. Without i_mutex there is no synchronization with write() anymore, however since the write() update is atomic on 64bit it just behaves like another racy SEEK_SET. On non atomic 32bit it's the same as SEEK_SET. => Don't need a lock, but need to use i_size_read() SEEK_CUR: This has a read-modify-write race window on the same file. One could argue that any application doing unsynchronized seeks on the same file is already broken. But for the sake of not adding a regression here I'm using the file->f_lock to synchronize this. Using this lock is much better than the inode mutex because it doesn't synchronize between processes. => So still need a lock, but can use a f_lock. This patch implements this new scheme in generic_file_llseek. I dropped generic_file_llseek_unlocked and changed all callers. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Aneesh Kumar K.V 提交于
We are going to add more flags and having them in hex format make it simpler Acked-by: NJ. Bruce Fields <bfields@redhat.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Steve French 提交于
fs/cifs/transport.c: In function 'wait_for_response': fs/cifs/transport.c:328: error: implicit declaration of function 'wait_event_freezekillable' Caused by commit f06ac72e ("cifs, freezer: add wait_event_freezekillable and have cifs use it"). In this config, CONFIG_FREEZER is not set. Reviewed-by: NShirish Pargaonkar <shirishp@us.ibm.com> CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Dave Airlie 提交于
This reverts commit dfadbbdb. Further upstream discussion between Marek and Thomas decided this wasn't fully baked and needed further work, so revert it before it hits mainline. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This reverts commit d3ed7402. Further upstream discussion between Thomas and Marek decided this needed more work and driver specifics. So revert before it goes upstream. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 27 10月, 2011 21 次提交
-
-
由 Namjae Jeon 提交于
'DISK_NAME_LEN' is undeclared when CONFIG_BLOCK is disabled; its use was introduced via genhd.h by the general purpose partition patch. To fix, we just add our own MAX_MMC_PART_NAME_LEN macro instead of using DISK_NAME_LEN. Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NAndrei Warkentin <andreiw@vmware.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Paul Walmsley 提交于
Due to hardware bugs, some MMC host controllers don't support multiple-block reads[1]. To resolve, add a new MMC capability flag, MMC_CAP2_NO_MULTI_READ, which can be set by affected host controller drivers. When this capability is set, all reads will be issued one sector at a time. 1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ Revision F (October 2010) (SPRZ278F), available from http://focus.ti.com/lit/er/sprz278f/sprz278f.pdfSigned-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Tested-by: NSteve Sakoman <sakoman@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Eric Dumazet 提交于
commit 66b13d99 (ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT) fixed IPv4 only. This part is for the IPv6 side, adding a tclass param to ip6_xmit() We alias tw_tclass and tw_tos, if socket family is INET6. [ if sockets is ipv4-mapped, only IP_TOS socket option is used to fill TOS field, TCLASS is not taken into account ] Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rob Herring 提交于
This adds devicetree binding support to the ARM pl061 driver removing the platform_data dependency. When DT binding is used, the gpio numbering is assigned dynamically. For now, interrupts are not supported with DT until irqdomains learn dynamic irq assignment. Rather than add another case of -1, updating the driver to use NO_IRQ. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Hamo 提交于
Should call the platform-specific __gpio_{get,set}_value instead of generic gpio_{get,set}_value Signed-off-by: NYang Bai <hamo.by@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Bing Zhao 提交于
Table 6-2: CCCR bit Definitions, address 00h. Part E1 SDIO Simplified Specification Version 3.00, Feb. 25, 2011. This patch has been tested with Marvell WLAN device SD8797. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jaehoon Chung 提交于
HPI command is defined in eMMC4.41. This feature is important for eMMC4.5 devices. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Seungwon Jeon 提交于
This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Kyungmin Park 提交于
MMC v4.5 supports the DISCARD feature (CMD38). It's different from trim and there's no check bit. Currently it's only supported at v4.5. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Kyungmin Park 提交于
In the v4.5, there's no secure erase & trim support. Instead it supports the sanitize feature. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jaehoon Chung 提交于
In dw_mmc 2.40a spec, Data register's offset is changed. Before we used Data register offset 0x100. but if somebody uses a 2.40a controller, we must use 0x200 for Data register. This patch adds a version-id checking point and uses SDMMC_DATA(x) instead of SDMMC_DATA. It assumes 2.40a is the latest version. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Girish K S 提交于
This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: NGirish K S <girish.shivananjappa@linaro.org> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Seungwon Jeon 提交于
EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Adrian Hunter 提交于
Ths patch allows runtime PM for sdhci-pci, runtime suspending after inactivity of 50ms and ensuring runtime resume before SDHC registers are accessed. During runtime suspend, interrupts are masked. The host controller state is restored at runtime resume. For Medfield, the host controller's card detect mechanism is supplanted by an always-on GPIO which provides for card detect wake-up. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Namjae Jeon 提交于
It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com> Acked-by: NAndrei Warkentin <awarkentin@vmware.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Adrian Hunter 提交于
Intel Medfield platform blocks access to eMMC boot partitions which results in switch errors. Since there is no access, mmcboot0/1 devices should not be created. Add a host capability to reflect that. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Girish K S 提交于
This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: NGirish K S <girish.shivananjappa@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
Provide platforms with a simplified way to specify MMCIF DMA slave IDs in a way, similar to SDHI and other sh_dma clients. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Adrian Hunter 提交于
eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Per Forlin 提交于
The err condition in post_req() is set to undo a call made to pre_req() that hasn't been started yet. The err condition is not set if an MMC request returns an error. Signed-off-by: NPer Forlin <per.forlin@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Stefan Nilsson XK 提交于
Adds a quirk which can be turned on for SDIO devices that do not support 512 byte requests in byte mode during CMD53. These requests will always be sent in block mode instead. This patch also enables this quirk for ST-Ericsson CW1200 WLAN device. Signed-off-by: NStefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: NUlf HANSSON <ulf.hansson@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-