提交 32c69fcc 编写于 作者: G Guennadi Liakhovetski 提交者: Mauro Carvalho Chehab

[media] V4L: soc-camera: add helper functions for new bus configuration type

Add helper functions to process the new media bus configuration type
similar to soc_camera_apply_sensor_flags() and
soc_camera_bus_param_compatible().
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 7cd74ffb
......@@ -107,6 +107,40 @@ const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
}
EXPORT_SYMBOL(soc_camera_xlate_by_fourcc);
/**
* soc_camera_apply_board_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
* @icl: camera platform parameters
* @cfg: media bus configuration
* @return: resulting flags
*/
unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
const struct v4l2_mbus_config *cfg)
{
unsigned long f, flags = cfg->flags;
/* If only one of the two polarities is supported, switch to the opposite */
if (icl->flags & SOCAM_SENSOR_INVERT_HSYNC) {
f = flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW);
if (f == V4L2_MBUS_HSYNC_ACTIVE_HIGH || f == V4L2_MBUS_HSYNC_ACTIVE_LOW)
flags ^= V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
if (icl->flags & SOCAM_SENSOR_INVERT_VSYNC) {
f = flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW);
if (f == V4L2_MBUS_VSYNC_ACTIVE_HIGH || f == V4L2_MBUS_VSYNC_ACTIVE_LOW)
flags ^= V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
if (icl->flags & SOCAM_SENSOR_INVERT_PCLK) {
f = flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING);
if (f == V4L2_MBUS_PCLK_SAMPLE_RISING || f == V4L2_MBUS_PCLK_SAMPLE_FALLING)
flags ^= V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
}
return flags;
}
EXPORT_SYMBOL(soc_camera_apply_board_flags);
/**
* soc_camera_apply_sensor_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
* @icl: camera platform parameters
......
......@@ -383,6 +383,39 @@ const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
}
EXPORT_SYMBOL(soc_mbus_get_fmtdesc);
unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
unsigned int flags)
{
unsigned long common_flags;
bool hsync = true, vsync = true, pclk, data, mode;
bool mipi_lanes, mipi_clock;
common_flags = cfg->flags & flags;
switch (cfg->type) {
case V4L2_MBUS_PARALLEL:
hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH |
V4L2_MBUS_HSYNC_ACTIVE_LOW);
vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH |
V4L2_MBUS_VSYNC_ACTIVE_LOW);
case V4L2_MBUS_BT656:
pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING |
V4L2_MBUS_PCLK_SAMPLE_FALLING);
data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH |
V4L2_MBUS_DATA_ACTIVE_LOW);
mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
return (!hsync || !vsync || !pclk || !data || !mode) ?
0 : common_flags;
case V4L2_MBUS_CSI2:
mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
return (!mipi_lanes || !mipi_clock) ? 0 : common_flags;
}
return 0;
}
EXPORT_SYMBOL(soc_mbus_config_compatible);
static int __init soc_mbus_init(void)
{
return 0;
......
......@@ -300,8 +300,10 @@ static inline void soc_camera_limit_side(int *start, int *length,
*start = start_min + length_max - *length;
}
extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
unsigned long flags);
unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
unsigned long flags);
unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
const struct v4l2_mbus_config *cfg);
/* This is only temporary here - until v4l2-subdev begins to link to video_device */
#include <linux/i2c.h>
......
......@@ -82,5 +82,7 @@ const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
unsigned int *numerator, unsigned int *denominator);
unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
unsigned int flags);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册