Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 27 1月, 2014 2 次提交
  3. 04 1月, 2014 2 次提交
  5. 03 1月, 2014 1 次提交
  7. 25 12月, 2013 1 次提交
  9. 24 12月, 2013 1 次提交
  11. 23 12月, 2013 1 次提交
  13. 21 12月, 2013 1 次提交
  15. 20 12月, 2013 1 次提交
  17. 19 12月, 2013 5 次提交
  19. 18 12月, 2013 1 次提交
  21. 17 12月, 2013 1 次提交
  23. 16 12月, 2013 1 次提交
  25. 13 12月, 2013 2 次提交
  27. 11 12月, 2013 1 次提交
  29. 10 12月, 2013 5 次提交
  31. 09 12月, 2013 1 次提交
  33. 02 12月, 2013 2 次提交
    • A
      ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2 · 46ca506c
      由 Arnaud Ebalard 提交于 
      Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ([1] for more
details) are supported by mainline kernel. The only missing elements in
provided .dts file are:

 - the front LCD module (Winstar WINSTAR WH1602): driver development is
   ongoing. This is the same LCD module as on ReadyNAS 104.
 - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet.

The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The
main differences are some additional LEDs for the disks, a Marvell
88SM4140 SATA Port multiplier (no driver required to access the disk)
and previously described LCD module. Otherwise, it shares the same SoC
(kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a),
fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200).

[1]: http://natisbad.org/NAS5/Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      46ca506c
    • A
      ARM: mvebu: Add Netgear ReadyNAS 2120 board · 8aa0b019
      由 Arnaud Ebalard 提交于 
      All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS
2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports,
USB 2.0 front port, Gigabit controller and PHYs for the two rear ports,
serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan
controllers, G751 temperature sensor) except for:

 - the Intersil ISL12057 I2C RTC Chip,
 - the Armada NAND controller.

Support for both of those is currently work in progress and does not
prevent boot.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      8aa0b019
  35. 26 11月, 2013 3 次提交
    • T
      ARM: dts: Add basic support for omap3 LDP zoom1 labrador · bd5fc6fa
      由 Tony Lindgren 提交于 
      Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
and GPIO keys work.

For twl4030-keypad we're still missing the binding, but
support for that should be trivial to add once the driver
has been updated.

MUSB I'm pretty sure I got got to enumerate once, but I
suspect the battery charging somehow disrupts it and it's
not enumerating in general for some reason.

Patches are welcome to improve things if people are
still using this board.

For reference, here's some more info on this old board:
http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo

Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      bd5fc6fa
    • T
      ARM: dts: Add basic Nokia N8X0 support · a900f516
      由 Tony Lindgren 提交于 
      Add minimal device tree support for n8x0 boards so we
can make omap2 device tree only. Note that we still need
to initialize various platform data quirks to keep
things working until n8x0 drivers support device tree.

Here's a rough todo list for the people using n8x0:

1. Update menelaus for device tree and set up
   regulators at least for the MMC driver

2. Remove the MMC regulator platform data callback
   by using the Menlaus regulators directly in the
   driver passed from the .dts file

3. Update GPMC connected devices for onenand and
   tusb6010 for device tree

We're planning to remove all legacy platform data
for mach-omap2 over next few merge cycles, so if
people are still using n8x0, please fix the issues
above.

Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      a900f516
    • T
      ARM: dts: Add basic device tree support for omap2430 sdp · 04a25dfb
      由 Tony Lindgren 提交于 
      I doubt that there are many people using 2430 sdp, but as
that's been historically an important acid test platform
for omap2+ related changes, let's add minimal device
tree support for it.

If anybody is using it beyond minimal boot testing, patches
for more complete device tree support are welcome.

Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      04a25dfb
  37. 01 11月, 2013 1 次提交
  39. 31 10月, 2013 2 次提交
    • A
      ARM: mvebu: Add Netgear ReadyNAS 104 board · 45e8815f
      由 Arnaud Ebalard 提交于 
      Main hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 104 are
supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port,
Gigabit controller and PHYs, serial port, LEDs, buttons, SATA ports,
G762 fan controller) and referenced in provided .dts file. Some additonal
work remains for:

 - Intersil ISL12057 I2C RTC and Alarm chip: working driver but needs
   to be splitted for submission of RTC part first;
 - Front LCD (Winstar 1602G): driver needs to be written
 - Armada NAND controller (to access onboard 128MB of NAND): support
   being pushed by @free-electrons people
 - 4 front SATA LEDs controlled via GPIO brought by NXP PCA9554:
   driver is available upstream. Not referenced/tested yet.

but the device is usable w/o those.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      45e8815f
    • T
      ARM: kirkwood: add support for OpenBlocks A7 platform · f24b56cb
      由 Thomas Petazzoni 提交于 
      The OpenBlocks A7 board is designed and sold by PlatHome, and based on
a Kirkwood 6283 Marvell SoC. It is quite similar to the OpenBlocks A6
already supported in the kernel, with the following main differences:

 - The A6 uses a RTC on I2C, while the A7 uses the internal SoC RTC.

 - The A6 has one Ethernet port, while the A7 has two Ethernet ports

 - The A6 has only one USB port, while the A7 integrates a USB hub,
   which provides two front-side USB port, and an internal USB port as
   well.

 - The A6 has 512 MB of RAM, while the A7 has 1 GB of RAM.

 - Slightly different GPIOs for some functions.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      f24b56cb
  41. 22 10月, 2013 1 次提交
  43. 19 10月, 2013 2 次提交
  45. 15 10月, 2013 1 次提交
    • T
      ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) · 5992234b
      由 Tony Lindgren 提交于 
      I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support
with the pinctrl patches, so it probably works better than the
board-*.c files ever did. Also the board-omap3evm.c file is broken
for the DSS, and has been for a while. Patches are welcome to fix
it in this .dts file, let's just drop the board-*.c file for this.

Note that off-idle currently requires doing request_irq() on the
wake-up pin from pinctrl-single IRQ domain until we can handle
that in some Linux generic way.

[tony@atomide.com: updated for make dtbs build fix]
Signed-off-by: NTony Lindgren <tony@atomide.com>
      5992234b
  47. 12 10月, 2013 1 次提交