- 05 8月, 2010 4 次提交
-
-
由 Linus Walleij 提交于
This extends the DMA engine driver for the COH 901 318 used in the U300 platform with the generic runtime slave control command. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Linus Walleij 提交于
This extends the DMA engine driver for the DMA40 used in the U8500 platform with the generic runtime slave configuration interface. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Linus Walleij 提交于
This adds an interface to the DMAengine to make it possible to reconfigure a slave channel at runtime. We add a few foreseen config parameters to the passed struct, with a void * pointer for custom per-device or per-platform runtime slave data. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Yong Wang 提交于
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platforms. This adds the driver for Topcliff PCH DMA controller. The DMA channels are strictly for device to host or host to device transfers and cannot be used for generic memcpy. Signed-off-by: NYong Wang <yong.y.wang@intel.com> [kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 28 7月, 2010 1 次提交
-
-
由 Vinod Koul 提交于
This patch add DMA drivers for DMA controllers in Langwell chipset of Intel(R) Moorestown platform and DMA controllers in Penwell of Intel(R) Medfield platfrom This patch adds support for Moorestown DMAC1 and DMAC2 controllers. It also add support for Medfiled GP DMA and DMAC1 controllers. These controllers supports memory to peripheral and peripheral to memory transfers. It support only single block transfers. This driver is based on Kernel DMA engine Anyone who wishes to use this controller should use DMA engine APIs This controller exposes DMA_SLAVE capabilities and notifies the client drivers of DMA transaction completion Config option required to be enabled CONFIG_INTEL_MID_DMAC=y Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 01 7月, 2010 3 次提交
-
-
由 Dan Williams 提交于
-
由 Julia Lawall 提交于
If td_desc is NULL, just skip both kfrees. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Carpenter 提交于
This silences a compile warning on 32 bit systems: drivers/dma/timb_dma.c:203: warning: cast to pointer from integer of different size Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 23 6月, 2010 19 次提交
-
-
由 Linus Walleij 提交于
This makes sure the DMA40 driver will also work on the oldest silicon revisions that have the on-chip memory on another location in the DB8500 and also requires explicit suspend before starting or resuming a logical channel. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> [added parenthesis to the definition of U8500_DMA_LCPA_BASE_ED] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
This makes it possible to disable physical channels. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Make sure we have no disabled physical channels when we start on the ux500 machines. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
This fixes a bug when suspending channels: first make the checks, then suspend the channel, not the other way around. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
This adds all available memcpy channels to the DB8500 in the ux500 platform (and fixes a typo). Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
On memcpy DMA operations we don't need flow control. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
This follows on the patch to allocate LCLA dynamically: the on-chip memory is needed for other things so now that that we're using it dynamically we can remove the LCLA resource altogether and free up some ESRAM memory. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Linus Walleij 提交于
Switch to allocating LCLA in memory instead of having a fixed address. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Correct bug that could cause paused channels to stop. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
We don't want interrupts when the source is done, only when the destination is done and everything is complete at the recieveing end of a transfer. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Avoid doing unnessecary suspend when modifying logical channels. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Fix up some locking issues found by enabling lock debugging. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Added checks to deny operating on none-allocated channels. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
This cleans up some extra newlines, removes some code duplication and moves the code to comply better with checkpatch. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Better error handling when channel allocation fails. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jonas Aaberg 提交于
Use kmem cache instead of own cache, reducing code duplication and bug sources. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Per Friden 提交于
fixed typo and moved freeing of client owned desc to free_dma. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Linus Walleij 提交于
We only need to write the configuration to a physical channel if it is free, else it is already written. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Per Friden 提交于
Fixed lli_max=1 issue in case of full lcla, currently this case is not properly handled. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 12 6月, 2010 13 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
由 Yinghai Lu 提交于
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: NYannick <yannick.roehlly@free.fr> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jiri Slaby 提交于
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jesse Barnes 提交于
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: NAlex Chiang <achiang@canonical.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Dan Carpenter 提交于
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Shi Weihua 提交于
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by: NShi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-