- 20 11月, 2012 6 次提交
-
-
由 Thomas Petazzoni 提交于
Since we got rid of the per-XOR channel 'mv_xor' driver, now the per-XOR engine driver that used to be called 'mv_xor_shared' can simply be named 'mv_xor'. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
'struct mv_xor_shared_platform_data' used to be the platform_data structure for the 'mv_xor_shared', but this driver is going to be renamed simply 'mv_xor', so also rename its platform_data structure accordingly. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
mv_xor_platform_data used to be the platform_data structure associated to the 'mv_xor' driver. This driver no longer exists, and this data structure really contains the properties of each XOR channel part of a given XOR engine. Therefore 'struct mv_xor_channel_data' is a more appropriate name. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
This member of the platform_data structure is no longer used, so get rid of it. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
Now that XOR channels are directly registered by the main 'mv_xor_shared' device ->probe() function and all users of the 'mv_xor' device have been removed, we can get rid of the latter. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
Extend the XOR engine driver (currently called "mv_xor_shared") so that XOR channels can be passed in the platform_data structure, and be registered from there. This will allow the users of the driver to be converted to the single platform_driver variant of the mv_xor driver. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
- 08 11月, 2012 1 次提交
-
-
由 Kishon Vijay Abraham I 提交于
ocp2scp was not having pdata support which makes *musb* fail for non-dt boot in OMAP platform. The pdata will have information about the devices that is connected to ocp2scp. ocp2scp driver will now make use of this information to create the devices that is attached to ocp2scp. This is needed to fix MUSB regression caused by commit c9e4412a (arm: omap: phy: remove unused functions from omap-phy-internal.c) Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> [tony@atomide.com: updated comments for regression info] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 06 10月, 2012 7 次提交
-
-
由 Lee Jones 提交于
Here we apply the bindings required for successful Device Tree probing of the i2c-nomadik driver. Signed-off-by: NLee Jones <lee.jones@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Sylwester Nawrocki 提交于
Depending on the sensor configuration it might be required to adjust the CSIS's output pixel clock so it is greater than its input pixel clock, in order to avoid the input data FIFO overflow. Use platform data to select SCLK_CSIS clock from CMU as a source, rather than CSI APB clock. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3eb "[media] s5p-csis: Handle all available power supplies". Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
The phy_enable callback is common for all Samsung SoC platforms, replace it with direct function call so the MIPI-CSI2 DPHY control is also possible on device tree instantiated platforms. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 G.Shark Jeong 提交于
This driver is a general version for LM3639 backlgiht + flash driver chip of TI. LM3639: The LM3639 is a single chip LCD Display Backlight driver + white LED Camera driver. Programming is done over an I2C compatible interface. www.ti.com [akpm@linux-foundation.org: code layout tweaks] Signed-off-by: NG.Shark Jeong <gshark.jeong@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 G.Shark Jeong 提交于
This driver is a general version for LM3630 backlgiht driver chip of TI. LM3630 : The LM3630 is a current mode boost converter which supplies the power and controls the current in two strings of up to 10 LEDs per string. Programming is done over an I2C compatible interface. www.ti.com [akpm@linux-foundation.org: make bled_name[] static, a few coding style tuneups, create new set_intensity(), partly to avoid awkward layout gymnastics] Signed-off-by: NG.Shark Jeong <gshark.jeong@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Daniel Jeong <daniel.jeong@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kim, Milo 提交于
LP8556 backlight driver supports fast refresh mode when exiting the low power mode. This bit can be configurable in the platform side. Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 9月, 2012 6 次提交
-
-
由 Peter Meerwald 提交于
the pca9633 leds driver can be used in open-drain or totem pole (a.k.a. push/pull) output driver mode; default is the later the patch allows to set the output driver mode using platform data (similar to configuration inferface provided by the tca6507 led driver) v2: move leds-pca9633.h to include/linux/platform_data/ (Bryan Wu) Signed-off-by: NPeter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
-
由 Amit Daniel Kachhap 提交于
This code added creates a link between temperature sensors, linux thermal framework and cooling devices for samsung exynos platform. This layer monitors the temperature from the sensor and informs the generic thermal layer to take the necessary cooling action. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: SangWook Ju <sw.ju@samsung.com> Cc: Durgadoss <durgadoss.r@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Amit Daniel Kachhap 提交于
Insert exynos5 TMU sensor changes into the thermal driver. Some exynos4 changes are made generic for exynos series. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: NSangWook Ju <sw.ju@samsung.com> Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: Durgadoss <durgadoss.r@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Amit Daniel Kachhap 提交于
This movement is needed because the hwmon entries and corresponding sysfs interface is a duplicate of utilities already provided by driver/thermal/thermal_sys.c. The goal is to place it in thermal folder and add necessary functions to use the in-kernel thermal interfaces. Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: SangWook Ju <sw.ju@samsung.com> Cc: Durgadoss <durgadoss.r@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Vivien Didelot 提交于
This patch moves the sht15.h header from include/linux to include/linux/platform_data, and update existing support (stargate2 platform) accordingly. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Vivien Didelot 提交于
The MAX197 is an A/D converter, made by Maxim. This driver currently supports the MAX197, and MAX199. They are both 8-Channel, Multi-Range, 5V, 12-Bit DAS with 8+4 Bus Interface and Fault Protection. The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to 10V, while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
- 21 9月, 2012 4 次提交
-
-
由 Kim, Milo 提交于
This is really minor, but it improves the readability. Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
-
由 Kim, Milo 提交于
All definitions should be unique, since they're in the gloabl namespace. So the prefix LP8727_ are added. Additionally, use BIT() macro for bit masks. Remove unnecessary definitions such as SW_DM1_U1 and SW_DP2_U2. Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
-
由 Kim, Milo 提交于
Debounce time is configurable in the platform side. If it is not defined, the default value is 270ms. Platform data is msec unit, and this time is converted to jiffies internally. The workqueue uses this jiffies time in the interrupt handling. So debounce_jiffies is added in the private data. Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
-
由 Kim, Milo 提交于
LP8727 platform data is optional, so the driver should work even the platform data is NULL. To check the platform data, charging parameter data should be changed to the pointer type. Fix NULL point access problem when getting the battery properties. When the data is NULL, just return as invalid value. Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
-
- 19 9月, 2012 5 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the spear include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the orion include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NTony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
-
由 Chris Ball 提交于
Tested on OLPC XO-4/MMP3, where the card detection pin for one of the controllers is a sideband GPIO. The third cell in the cd-gpios property controls whether the GPIO is active high/active low. (Also, pass host_caps2 through from platdata to the mmc host.) Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> [kliu5@marvell.com: Compile fix] Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 18 9月, 2012 2 次提交
-
-
由 Laurent Pinchart 提交于
The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Lars-Peter Clausen 提交于
This patch adds support for the AD5755, AD5755-1, AD5757, AD5735, AD5737 16 and 14 bit quad-channel DACs. The AD5757/AD5737 only have current outputs, but for the AD5755/AD5757 each of the outputs can be configured to either be a voltage or a current output. We only allow to configure this at device probe time since usually this needs to match the external circuitry and should not be changed on the fly. A few trivial formatting changes on merge. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
- 17 9月, 2012 1 次提交
-
-
由 Shawn Guo 提交于
Rather than including mach/iomux-mx27.h to define gpio numbers and set up the pins, the patch moves all these into machine code and has the gpio numbers passed to driver via platform_data. As the result, we can remove the mach/iomux-mx27.h inclusion from driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NJavier Martin <javier.martin@vista-silicon.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 9月, 2012 8 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NFelipe Balbi <balbi@ti.com> Acked-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the w90x900 include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the vt8500 include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NTony Prisk <linux@prisktech.co.nz> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This the definitions for the tegra sdhci driver out of the tegra include directories, which is the last one for this platform. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NChris Ball <cjb@laptop.org>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the sa1100 include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jochen Friedrich <jochen@scram.de>
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NJeff Garzik <jgarzik@redhat.com> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Acked-by: NPaul Parsons <lost.distance@yahoo.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Acked-By: NStefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the netx include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the msm include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NDavid Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Chris Ball <cjb@laptop.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-arm-msm@vger.kernel.org
-