Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 2月, 2013 3 次提交
  3. 31 1月, 2013 1 次提交
  5. 26 1月, 2013 5 次提交
    • D
      x86, kvm: Fix kvm's use of __pa() on percpu areas · 5dfd486c
      由 Dave Hansen 提交于 
      In short, it is illegal to call __pa() on an address holding
a percpu variable.  This replaces those __pa() calls with
slow_virt_to_phys().  All of the cases in this patch are
in boot time (or CPU hotplug time at worst) code, so the
slow pagetable walking in slow_virt_to_phys() is not expected
to have a performance impact.

The times when this actually matters are pretty obscure
(certain 32-bit NUMA systems), but it _does_ happen.  It is
important to keep KVM guests working on these systems because
the real hardware is getting harder and harder to find.

This bug manifested first by me seeing a plain hang at boot
after this message:

	CPU 0 irqstacks, hard=f3018000 soft=f301a000

or, sometimes, it would actually make it out to the console:

[    0.000000] BUG: unable to handle kernel paging request at ffffffff

I eventually traced it down to the KVM async pagefault code.
This can be worked around by disabling that code either at
compile-time, or on the kernel command-line.

The kvm async pagefault code was injecting page faults in
to the guest which the guest misinterpreted because its
"reason" was not being properly sent from the host.

The guest passes a physical address of an per-cpu async page
fault structure via an MSR to the host.  Since __pa() is
broken on percpu data, the physical address it sent was
bascially bogus and the host went scribbling on random data.
The guest never saw the real reason for the page fault (it
was injected by the host), assumed that the kernel had taken
a _real_ page fault, and panic()'d.  The behavior varied,
though, depending on what got corrupted by the bad write.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212435.4905663F@kernel.stglabs.ibm.comAcked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      5dfd486c
    • D
      x86, mm: Create slow_virt_to_phys() · d7656534
      由 Dave Hansen 提交于 
      This is necessary because __pa() does not work on some kinds of
memory, like vmalloc() or the alloc_remap() areas on 32-bit
NUMA systems.  We have some functions to do conversions _like_
this in the vmalloc() code (like vmalloc_to_page()), but they
do not work on sizes other than 4k pages.  We would potentially
need to be able to handle all the page sizes that we use for
the kernel linear mapping (4k, 2M, 1G).

In practice, on 32-bit NUMA systems, the percpu areas get stuck
in the alloc_remap() area.  Any __pa() call on them will break
and basically return garbage.

This patch introduces a new function slow_virt_to_phys(), which
walks the kernel page tables on x86 and should do precisely
the same logical thing as __pa(), but actually work on a wider
range of memory.  It should work on the normal linear mapping,
vmalloc(), kmap(), etc...
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212433.4D1FCA62@kernel.stglabs.ibm.comAcked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      d7656534
    • D
      x86, mm: Use new pagetable helpers in try_preserve_large_page() · f3c4fbb6
      由 Dave Hansen 提交于 
      try_preserve_large_page() can be slightly simplified by using
the new page_level_*() helpers.  This also moves the 'level'
over to the new pg_level enum type.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212432.14F3D993@kernel.stglabs.ibm.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      f3c4fbb6
    • D
      x86, mm: Pagetable level size/shift/mask helpers · 4cbeb51b
      由 Dave Hansen 提交于 
      I plan to use lookup_address() to walk the kernel pagetables
in a later patch.  It returns a "pte" and the level in the
pagetables where the "pte" was found.  The level is just an
enum and needs to be converted to a useful value in order to
do address calculations with it.  These helpers will be used
in at least two places.

This also gives the anonymous enum a real name so that no one
gets confused about what they should be passing in to these
helpers.

"PTE_SHIFT" was chosen for naming consistency with the other
pagetable levels (PGD/PUD/PMD_SHIFT).

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212431.405D3A8C@kernel.stglabs.ibm.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      4cbeb51b
    • D
      x86, mm: Make DEBUG_VIRTUAL work earlier in boot · a25b9316
      由 Dave Hansen 提交于 
      The KVM code has some repeated bugs in it around use of __pa() on
per-cpu data.  Those data are not in an area on which using
__pa() is valid.  However, they are also called early enough in
boot that __vmalloc_start_set is not set, and thus the
CONFIG_DEBUG_VIRTUAL debugging does not catch them.

This adds a check to also verify __pa() calls against max_low_pfn,
which we can use earler in boot than is_vmalloc_addr().  However,
if we are super-early in boot, max_low_pfn=0 and this will trip
on every call, so also make sure that max_low_pfn is set before
we try to use it.

With this patch applied, CONFIG_DEBUG_VIRTUAL will actually
catch the bug I was chasing (and fix later in this series).

I'd love to find a generic way so that any __pa() call on percpu
areas could do a BUG_ON(), but there don't appear to be any nice
and easy ways to check if an address is a percpu one.  Anybody
have ideas on a way to do this?
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212430.F46F8159@kernel.stglabs.ibm.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      a25b9316
  7. 23 1月, 2013 1 次提交
    • O
      ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL · 9899d11f
      由 Oleg Nesterov 提交于 
      putreg() assumes that the tracee is not running and pt_regs_access() can
safely play with its stack.  However a killed tracee can return from
ptrace_stop() to the low-level asm code and do RESTORE_REST, this means
that debugger can actually read/modify the kernel stack until the tracee
does SAVE_REST again.

set_task_blockstep() can race with SIGKILL too and in some sense this
race is even worse, the very fact the tracee can be woken up breaks the
logic.

As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace()
call, this ensures that nobody can ever wakeup the tracee while the
debugger looks at it.  Not only this fixes the mentioned problems, we
can do some cleanups/simplifications in arch_ptrace() paths.

Probably ptrace_unfreeze_traced() needs more callers, for example it
makes sense to make the tracee killable for oom-killer before
access_process_vm().

While at it, add the comment into may_ptrace_stop() to explain why
ptrace_stop() still can't rely on SIGKILL and signal_pending_state().
Reported-by: NSalman Qazi <sqazi@google.com>
Reported-by: NSuleiman Souhlal <suleiman@google.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9899d11f
  9. 17 1月, 2013 1 次提交
    • A
      xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. · 9174adbe
      由 Andrew Cooper 提交于 
      This fixes CVE-2013-0190 / XSA-40

There has been an error on the xen_failsafe_callback path for failed
iret, which causes the stack pointer to be wrong when entering the
iret_exc error path.  This can result in the kernel crashing.

In the classic kernel case, the relevant code looked a little like:

        popl %eax      # Error code from hypervisor
        jz 5f
        addl $16,%esp
        jmp iret_exc   # Hypervisor said iret fault
5:      addl $16,%esp
                       # Hypervisor said segment selector fault

Here, there are two identical addls on either option of a branch which
appears to have been optimised by hoisting it above the jz, and
converting it to an lea, which leaves the flags register unaffected.

In the PVOPS case, the code looks like:

        popl_cfi %eax         # Error from the hypervisor
        lea 16(%esp),%esp     # Add $16 before choosing fault path
        CFI_ADJUST_CFA_OFFSET -16
        jz 5f
        addl $16,%esp         # Incorrectly adjust %esp again
        jmp iret_exc

It is possible unprivileged userspace applications to cause this
behaviour, for example by loading an LDT code selector, then changing
the code selector to be not-present.  At this point, there is a race
condition where it is possible for the hypervisor to return back to
userspace from an interrupt, fault on its own iret, and inject a
failsafe_callback into the kernel.

This bug has been present since the introduction of Xen PVOPS support
in commit 5ead97c8 (xen: Core Xen implementation), in 2.6.23.
Signed-off-by: NFrediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: NAndrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      9174adbe
  11. 16 1月, 2013 1 次提交
  13. 14 1月, 2013 2 次提交
  15. 12 1月, 2013 1 次提交
    • J
      x86/Sandy Bridge: reserve pages when integrated graphics is present · a9acc536
      由 Jesse Barnes 提交于 
      SNB graphics devices have a bug that prevent them from accessing certain
memory ranges, namely anything below 1M and in the pages listed in the
table.  So reserve those at boot if set detect a SNB gfx device on the
CPU to avoid GPU hangs.

Stephane Marchesin had a similar patch to the page allocator awhile
back, but rather than reserving pages up front, it leaked them at
allocation time.

[ hpa: made a number of stylistic changes, marked arrays as static
  const, and made less verbose; use "memblock=debug" for full
  verbosity. ]
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      a9acc536
  17. 10 1月, 2013 1 次提交
    • D
      perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side · a706d965
      由 David Ahern 提交于 
      This patch is brought to you by the letter 'H'.

Commit 20b279 breaks compatiblity with older perf binaries when run with
precise modifier (:p or :pp) by requiring the exclude_guest attribute to be
set. Older binaries default exclude_guest to 0 (ie., wanting guest-based
samples) unless host only profiling is requested (:H modifier). The workaround
for older binaries is to add H to the modifier list (e.g., -e cycles:ppH -
toggles exclude_guest to 1). This was deemed unacceptable by Linus:

https://lkml.org/lkml/2012/12/12/570

Between family in town and the fresh snow in Breckenridge there is no time left
to be working on the proper fix for this over the holidays. In the New Year I
have more pressing problems to resolve -- like some memory leaks in perf which
are proving to be elusive -- although the aforementioned snow is probably why
they are proving to be elusive. Either way I do not have any spare time to work
on this and from the time I have managed to spend on it the solution is more
difficult than just moving to a new exclude_guest flag (does not work) or
flipping the logic to include_guest (which is not as trivial as one would
think).

So, two options: silently force exclude_guest on as suggested by Gleb which
means no impact to older perf binaries or revert the original patch which
caused the breakage.

This patch does the latter -- reverts the original patch that introduced the
regression. The problem can be revisited in the future as time allows.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1356749767-17322-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a706d965
  19. 08 1月, 2013 1 次提交
  21. 04 1月, 2013 1 次提交
    • G
      X86: drivers: remove __dev* attributes. · a18e3690
      由 Greg Kroah-Hartman 提交于 
      CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a18e3690
  23. 27 12月, 2012 1 次提交
  25. 21 12月, 2012 1 次提交
  27. 20 12月, 2012 7 次提交
  29. 19 12月, 2012 2 次提交
  31. 18 12月, 2012 5 次提交
  33. 16 12月, 2012 2 次提交
  35. 15 12月, 2012 1 次提交
  37. 14 12月, 2012 1 次提交
    • K
      module: add syscall to load module from fd · 34e1169d
      由 Kees Cook 提交于 
      As part of the effort to create a stronger boundary between root and
kernel, Chrome OS wants to be able to enforce that kernel modules are
being loaded only from our read-only crypto-hash verified (dm_verity)
root filesystem. Since the init_module syscall hands the kernel a module
as a memory blob, no reasoning about the origin of the blob can be made.

Earlier proposals for appending signatures to kernel modules would not be
useful in Chrome OS, since it would involve adding an additional set of
keys to our kernel and builds for no good reason: we already trust the
contents of our root filesystem. We don't need to verify those kernel
modules a second time. Having to do signature checking on module loading
would slow us down and be redundant. All we need to know is where a
module is coming from so we can say yes/no to loading it.

If a file descriptor is used as the source of a kernel module, many more
things can be reasoned about. In Chrome OS's case, we could enforce that
the module lives on the filesystem we expect it to live on.  In the case
of IMA (or other LSMs), it would be possible, for example, to examine
extended attributes that may contain signatures over the contents of
the module.

This introduces a new syscall (on x86), similar to init_module, that has
only two arguments. The first argument is used as a file descriptor to
the module and the second argument is a pointer to the NULL terminated
string of module arguments.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
      34e1169d
  39. 13 12月, 2012 2 次提交