- 17 10月, 2007 40 次提交
-
-
由 Bryan Kadzban 提交于
drivers/char/rtc.c exposed a sysctl to change the maximum frequency at which a non-root user could ask the RTC to generate interrupts (via the RTC_IRQP_SET ioctl). This value is no longer available under the new RTC subsystem, so add it to sysfs for each RTC device. Works for me on x86_64 (both reads and writes), using rtc-cmos. Signed-off-by: NBryan Kadzban <bryan@kdzbn.homelinux.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Some cleanups for the rtc-cmos probe logic: - Claim i/o ports with request_region() not request_resource(), for better coexistence betwen platform and pnp bus glues. - Claim those ports earlier, to help work around procfs bugs (it allows duplicate names, like /proc/driver/rtc). - Fix some glitches in cleanup code, notably a cut'n'paste-o where the i/o port region might not get released during cleanup after a probe fault. And some comment clarifications, including noting that this code must work with PNPBIOS not just PNPACPI.. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Lord 提交于
Fix readback of RTC alarms on platforms which return -1 in non-hardware-supported RTC alarm fields. To fill in the missing (-1) values, we grab an RTC timestamp along with the RTC alarm value, and use the timestamp fields to populate the missing alarm fields. To counter field-wrap races (since the timestamp and alarm are not read together atomically), we read the RTC timestamp both before and after reading the RTC alarm value, and then check for wrapped fields --> if any have wrapped, we know we have a possible inconsistency, so we loop and reread the timestamp and alarm again. Wrapped fields in the RTC timestamps are an issue because rtc-cmos.c, for example, also gets/uses an RTC timestamp internally while fetching the RTC alarm. If our timestamp here wasn't the same (minutes and higher) as what was used internally there, then we might end up populating the -1 fields with inconsistent values. This fixes readbacks from /sys/class/rtc/rtc?/wakealarm, as well as other code paths which call rtc_read_alarm(). Signed-off-by: NMark Lord <mlord@pobox.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Scott Wood 提交于
This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip, based on drivers/i2c/chips/ds1374.c. It supports alarm functionality. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Not all i2c adapters support I2C-level messaging. Check that the adapter does before probing for a PCF8583 chip, as the driver makes use of i2c_transfer and i2c_master_send. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
The rtc-ds1742 platform driver name doesn't match its module name, which might prevents it from properly hotplugging. There is only two in-tree user of its driver, which are fixed by this patch too. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
The rtc-ds1553 platform driver name doesn't match its module name, which might prevent it from properly hotplugging. This driver has no in-tree users. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Zhan 提交于
In rtc-dev.c, when a rtc device is opened, file->private_data is already attached with the rtc device pointer, so there is no need to call to_rtc_device() to convert file->private_data to a rtc device pointer. Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NMark Zhan <rongkai.zhan@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
RTC periodic IRQs are only defined to work for 2^N Hz values. This patch moves that validity check into the infrastructure, so drivers don't need to check it; and adds kerneldoc for the two interface functions related to periodic IRQs. (One of which was quite mysterious until its first use was recently checked in!) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alessandro Zummo 提交于
Add kernel/kernel and kernel/user locking for the periodic irq feature of the rtc class. PIE ioctls are also supported. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
The functions that eventually call down to ecryptfs_read_lower(), ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header() should have the responsibility of managing the page Uptodate status. This patch gets rid of some of the ugliness that resulted from trying to push some of the page flag setting too far down the stack. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Replace some magic numbers with sizeof() equivalents. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
The switch to read_write.c routines and the persistent file make a number of functions unnecessary. This patch removes them. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Initialize persistent lower file on inode create. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Update data types and add casts in order to avoid potential overflow issues. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Convert readpage, prepare_write, and commit_write to use read_write.c routines. Remove sync_page; I cannot think of a good reason for implementing that in eCryptfs. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Rather than open a new lower file for every eCryptfs file that is opened, truncated, or setattr'd, instead use the existing lower persistent file for the eCryptfs inode. Change truncate to use read_write.c functions. Change ecryptfs_getxattr() to use the common ecryptfs_getxattr_lower() function. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Update the metadata read/write functions and grow_file() to use the read_write.c routines. Do not open another lower file; use the persistent lower file instead. Provide a separate function for crypto.c::ecryptfs_read_xattr_region() to get to the lower xattr without having to go through the eCryptfs getxattr. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
This patch sets up and destroys the persistent lower file for each eCryptfs inode. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Replace page encryption and decryption routines and inode size write routine with versions that utilize the read_write.c functions. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Add a set of functions through which all I/O to lower files is consolidated. This patch adds a new inode_info reference to a persistent lower file for each eCryptfs inode; another patch later in this series will set that up. This persistent lower file is what the read_write.c functions use to call vfs_read() and vfs_write() on the lower filesystem, so even when reads and writes come in through aops->readpage and aops->writepage, we can satisfy them without resorting to direct access to the lower inode's address space. Several function declarations are going to be changing with this patchset. For now, in order to keep from breaking the build, I am putting dummy parameters in for those functions. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
The error paths and the module exit code need work. sysfs unregistration is not the right place to tear down the crypto subsystem, and the code to undo subsystem initializations on various error paths is unnecessarily duplicated. This patch addresses those issues. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Remove assignments in if-statements. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
There is no point to keeping a separate header_extent_size and an extent_size. The total size of the header can always be represented as some multiple of the regular data extent size. [randy.dunlap@oracle.com: ecryptfs: fix printk format warning] Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
eCryptfs is currently just passing through splice reads to the lower filesystem. This is obviously incorrect behavior; the decrypted data is what needs to be read, not the lower encrypted data. I cannot think of any good reason for eCryptfs to implement splice_read, so this patch points the eCryptfs fops splice_read to use generic_file_splice_read. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Reviewed-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > Please check that all the newly-added global symbols do indeed need > to be global. Change symbols in keystore.c and crypto.o to static if they do not need to be global. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > > struct mutex *tfm_mutex = NULL; > > This initialisation looks like it's here to kill bogus gcc warning > (if it is, it should have been commented). Please investigate > uninitialized_var() and __maybe_unused sometime. Remove some unnecessary variable initializations. There may be a few more such intializations remaining in the code base; a future patch will take care of those. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: From: mhalcrow@us.ibm.com <mhalcrow@halcrow.austin.ibm.com> > > +/** > > + * decrypt_passphrase_encrypted_session_key - Decrypt the session key > > + * with the given auth_tok. > > * > > * Returns Zero on success; non-zero error otherwise. > > */ > > That comment purports to be a kerneldoc-style comment. But > > - kerneldoc doesn't support multiple lines on the introductory line > which identifies the name of the function (alas). So you'll need to > overflow 80 cols here. > > - the function args weren't documented > > But the return value is! People regularly forget to do that. And > they frequently forget to document the locking prerequisites and the > permissible calling contexts (process/might_sleep/hardirq, etc) > > (please check all ecryptfs kerneldoc for this stuff sometime) This patch cleans up some of the existing comments and makes a couple of line break tweaks. There is more work to do to bring eCryptfs into full kerneldoc-compliance. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > > +struct ecryptfs_global_auth_tok { > > +#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001 > > + u32 flags; > > + struct list_head mount_crypt_stat_list; > > + struct key *global_auth_tok_key; > > + struct ecryptfs_auth_tok *global_auth_tok; > > + unsigned char sig[ECRYPTFS_SIG_SIZE_HEX + 1]; > > +}; > > + > > +struct ecryptfs_key_tfm { > > + struct crypto_blkcipher *key_tfm; > > + size_t key_size; > > + struct mutex key_tfm_mutex; > > + struct list_head key_tfm_list; > > + unsigned char cipher_name[ECRYPTFS_MAX_CIPHER_NAME_SIZE + 1]; > > +}; > > Please consider commenting your struct fields carefully: it's a > great way to help other to understand your code. Add some comments to the ecryptfs_global_auth_tok and ecryptfs_key_tfm structs to make their functions more easily ascertained. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > > +int ecryptfs_destruct_crypto(void) > > ecryptfs_destroy_crypto would be more grammatically correct ;) Grammatical fix for some function names. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > > + crypt_stat->flags |= ECRYPTFS_ENCRYPTED; > > + crypt_stat->flags |= ECRYPTFS_KEY_VALID; > > Maybe the compiler can optimise those two statements, but we'd > normally provide it with some manual help. This patch provides the compiler with some manual help for optimizing the setting of some flags. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Andrew Morton wrote: > > + mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex); > > + BUG_ON(mount_crypt_stat->num_global_auth_toks == 0); > > + mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex); > > That's odd-looking. If it was a bug for num_global_auth_toks to be > zero, and if that mutex protects num_global_auth_toks then as soon > as the lock gets dropped, another thread can make > num_global_auth_toks zero, hence the bug is present. Perhaps? That was serving as an internal sanity check that should not have made it into the final patch set in the first place. This patch removes it. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
fs/ecryptfs/keystore.c: In function 'parse_tag_1_packet': fs/ecryptfs/keystore.c:557: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c: In function 'parse_tag_3_packet': fs/ecryptfs/keystore.c:690: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c: In function 'parse_tag_11_packet': fs/ecryptfs/keystore.c:836: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c: In function 'write_tag_1_packet': fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' fs/ecryptfs/keystore.c: In function 'write_tag_11_packet': fs/ecryptfs/keystore.c:1472: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c: In function 'write_tag_3_packet': fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' fs/ecryptfs/keystore.c: In function 'ecryptfs_generate_key_packet_set': fs/ecryptfs/keystore.c:1778: warning: passing argument 2 of 'write_tag_11_packet' from incompatible pointer type fs/ecryptfs/main.c: In function 'ecryptfs_parse_options': fs/ecryptfs/main.c:363: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Trivial updates to comment and debug statement. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Fix up the Tag 11 writing code to handle size limits and boundaries more explicitly. It looks like the packet length was 1 shorter than it should have been, chopping off the last byte of the key identifier. This is largely inconsequential, since it is not much more likely that a key identifier collision will occur with 7 bytes rather than 8. This patch fixes the packet to use the full number of bytes that were originally intended to be used for the key identifier. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Fix up the Tag 11 parsing code to handle size limits and boundaries more explicitly. Pay attention to *8* bytes for the key identifier (literal data), no more, no less. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Fix up the Tag 3 parsing code to handle size limits and boundaries more explicitly. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Fix up the Tag 1 parsing code to handle size limits and boundaries more explicitly. Initialize the new auth_tok's flags. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Cc: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Introduce kmem_cache objects for handling multiple keys per inode. Add calls in the module init and exit code to call the key list initialization/destruction functions. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
Use list_for_each_entry_safe() when wiping the authentication token list. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-