ARM64: dts: meson-gxbb: Add Wifi 32K clock for p20x boards

Add a 32768Hz clock generated by the PWM E port used by the WiFi module.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -111,6 +111,13 @@
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -205,3 +212,11 @@
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 };
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};