Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 c852ac80 编写于 作者: L Lennert Buytenhek 提交者： Russell King
浏览文件
操作

[ARM] 3832/1: iop3xx: coding style cleanup 

Since the iop32x code isn't iop321-specific, and the iop33x code isn't
iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up
the code to conform to the coding style guidelines somewhat better.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 475549fa
隐藏空白更改
内联 并排
Showing with 376 addition and 558 deletion
arch/arm/mach-iop32x/Kconfig
浏览文件 @ c852ac80
......@@ -8,13 +8,14 @@ config ARCH_IQ80321
bool "Enable support for IQ80321"
help
Say Y here if you want to run your kernel on the Intel IQ80321
evaluation kit for the IOP321 chipset.
evaluation kit for the IOP321 processor.
config ARCH_IQ31244
bool "Enable support for IQ31244"
bool "Enable support for EP80219/IQ31244"
help
Say Y here if you want to run your kernel on the Intel IQ31244
evaluation kit for the IOP321 chipset.
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 processor (a IOP321 variant)
or the IQ31244 evaluation kit for the IOP321 processor.
endmenu
......
arch/arm/mach-iop32x/iq31244.c
浏览文件 @ c852ac80
......@@ -98,16 +98,16 @@ ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 0) {
/* CFlash */
irq = IRQ_IOP321_XINT1;
irq = IRQ_IOP32X_XINT1;
} else if (slot == 1) {
/* 82551 Pro 100 */
irq = IRQ_IOP321_XINT0;
irq = IRQ_IOP32X_XINT0;
} else if (slot == 2) {
/* PCI-X Slot */
irq = IRQ_IOP321_XINT3;
irq = IRQ_IOP32X_XINT3;
} else if (slot == 3) {
/* SATA */
irq = IRQ_IOP321_XINT2;
irq = IRQ_IOP32X_XINT2;
} else {
printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
......@@ -134,18 +134,18 @@ iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 0) {
/* CFlash */
irq = IRQ_IOP321_XINT1;
irq = IRQ_IOP32X_XINT1;
} else if (slot == 1) {
/* SATA */
irq = IRQ_IOP321_XINT2;
irq = IRQ_IOP32X_XINT2;
} else if (slot == 2) {
/* PCI-X Slot */
irq = IRQ_IOP321_XINT3;
irq = IRQ_IOP32X_XINT3;
} else if (slot == 3) {
/* 82546 GigE */
irq = IRQ_IOP321_XINT0;
irq = IRQ_IOP32X_XINT0;
} else {
printk(KERN_ERR "iq31244_pci_map_irq() called for unknown "
printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
......@@ -206,7 +206,7 @@ static struct plat_serial8250_port iq31244_serial_port[] = {
{
.mapbase = IQ31244_UART,
.membase = (char *)IQ31244_UART,
.irq = IRQ_IOP321_XINT1,
.irq = IRQ_IOP32X_XINT1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
......@@ -287,7 +287,7 @@ MACHINE_START(IQ31244, "Intel IQ31244")
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = iq31244_map_io,
.init_irq = iop321_init_irq,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
MACHINE_END
arch/arm/mach-iop32x/iq80321.c
浏览文件 @ c852ac80
......@@ -78,19 +78,19 @@ iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if ((slot == 2 || slot == 6) && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT2;
irq = IRQ_IOP32X_XINT2;
} else if ((slot == 2 || slot == 6) && pin == 2) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT3;
irq = IRQ_IOP32X_XINT3;
} else if ((slot == 2 || slot == 6) && pin == 3) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT0;
irq = IRQ_IOP32X_XINT0;
} else if ((slot == 2 || slot == 6) && pin == 4) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT1;
irq = IRQ_IOP32X_XINT1;
} else if (slot == 4 || slot == 8) {
/* Gig-E */
irq = IRQ_IOP321_XINT0;
irq = IRQ_IOP32X_XINT0;
} else {
printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
......@@ -148,7 +148,7 @@ static struct plat_serial8250_port iq80321_serial_port[] = {
{
.mapbase = IQ80321_UART,
.membase = (char *)IQ80321_UART,
.irq = IRQ_IOP321_XINT1,
.irq = IRQ_IOP32X_XINT1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
......@@ -187,7 +187,7 @@ MACHINE_START(IQ80321, "Intel IQ80321")
.io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = iq80321_map_io,
.init_irq = iop321_init_irq,
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
.init_machine = iq80321_init_machine,
MACHINE_END
arch/arm/mach-iop32x/irq.c
浏览文件 @ c852ac80
/*
* linux/arch/arm/mach-iop32x/irq.c
* arch/arm/mach-iop32x/irq.c
*
* Generic IOP32X IRQ handling functionality
*
......@@ -9,76 +9,66 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Added IOP3XX chipset and IQ80321 board masking code.
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
static u32 iop321_mask /* = 0 */;
static u32 iop32x_mask;
static inline void intctl_write(u32 val)
{
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
static inline void intstr_write(u32 val)
{
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
static void
iop321_irq_mask (unsigned int irq)
iop32x_irq_mask(unsigned int irq)
{
iop321_mask &= ~(1 << irq);
intctl_write(iop321_mask);
iop32x_mask &= ~(1 << irq);
intctl_write(iop32x_mask);
}
static void
iop321_irq_unmask (unsigned int irq)
iop32x_irq_unmask(unsigned int irq)
{
iop321_mask |= (1 << irq);
intctl_write(iop321_mask);
iop32x_mask |= 1 << irq;
intctl_write(iop32x_mask);
}
struct irq_chip ext_chip = {
.name = "IOP",
.ack = iop321_irq_mask,
.mask = iop321_irq_mask,
.unmask = iop321_irq_unmask,
.name = "IOP32x",
.ack = iop32x_irq_mask,
.mask = iop32x_irq_mask,
.unmask = iop32x_irq_unmask,
};
void __init iop321_init_irq(void)
void __init iop32x_init_irq(void)
{
unsigned int i;
int i;
intctl_write(0); // disable all interrupts
intstr_write(0); // treat all as IRQ
if(machine_is_iq80321() ||
machine_is_iq31244()) // all interrupts are inputs to chip
intctl_write(0);
intstr_write(0);
if (machine_is_iq80321() ||
machine_is_iq31244())
*IOP3XX_PCIIRSR = 0x0f;
for(i = 0; i < NR_IRQS; i++)
{
for (i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, &ext_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
arch/arm/mach-iop33x/iq80331.c
浏览文件 @ c852ac80
......@@ -61,19 +61,19 @@ iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 1 && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP331_XINT1;
irq = IRQ_IOP33X_XINT1;
} else if (slot == 1 && pin == 2) {
/* PCI-X Slot INTB */
irq = IRQ_IOP331_XINT2;
irq = IRQ_IOP33X_XINT2;
} else if (slot == 1 && pin == 3) {
/* PCI-X Slot INTC */
irq = IRQ_IOP331_XINT3;
irq = IRQ_IOP33X_XINT3;
} else if (slot == 1 && pin == 4) {
/* PCI-X Slot INTD */
irq = IRQ_IOP331_XINT0;
irq = IRQ_IOP33X_XINT0;
} else if (slot == 2) {
/* GigE */
irq = IRQ_IOP331_XINT2;
irq = IRQ_IOP33X_XINT2;
} else {
printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
......@@ -142,7 +142,7 @@ MACHINE_START(IQ80331, "Intel IQ80331")
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
.init_machine = iq80331_init_machine,
MACHINE_END
arch/arm/mach-iop33x/iq80332.c
浏览文件 @ c852ac80
......@@ -61,19 +61,19 @@ iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 4 && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP331_XINT0;
irq = IRQ_IOP33X_XINT0;
} else if (slot == 4 && pin == 2) {
/* PCI-X Slot INTB */
irq = IRQ_IOP331_XINT1;
irq = IRQ_IOP33X_XINT1;
} else if (slot == 4 && pin == 3) {
/* PCI-X Slot INTC */
irq = IRQ_IOP331_XINT2;
irq = IRQ_IOP33X_XINT2;
} else if (slot == 4 && pin == 4) {
/* PCI-X Slot INTD */
irq = IRQ_IOP331_XINT3;
irq = IRQ_IOP33X_XINT3;
} else if (slot == 6) {
/* GigE */
irq = IRQ_IOP331_XINT2;
irq = IRQ_IOP33X_XINT2;
} else {
printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
......@@ -142,7 +142,7 @@ MACHINE_START(IQ80332, "Intel IQ80332")
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
.init_machine = iq80332_init_machine,
MACHINE_END
arch/arm/mach-iop33x/irq.c
浏览文件 @ c852ac80
/*
* linux/arch/arm/mach-iop33x/irq.c
* arch/arm/mach-iop33x/irq.c
*
* Generic IOP331 IRQ handling functionality
*
......@@ -9,51 +9,44 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
static u32 iop331_mask0 = 0;
static u32 iop331_mask1 = 0;
static u32 iop33x_mask0;
static u32 iop33x_mask1;
static inline void intctl_write0(u32 val)
static inline void intctl0_write(u32 val)
{
// INTCTL0
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
static inline void intctl_write1(u32 val)
static inline void intctl1_write(u32 val)
{
// INTCTL1
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
static inline void intstr_write0(u32 val)
static inline void intstr0_write(u32 val)
{
// INTSTR0
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
static inline void intstr_write1(u32 val)
static inline void intstr1_write(u32 val)
{
// INTSTR1
iop3xx_cp6_enable();
asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val));
asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
iop3xx_cp6_disable();
}
......@@ -72,65 +65,63 @@ static inline void intsize_write(u32 val)
}
static void
iop331_irq_mask1 (unsigned int irq)
iop33x_irq_mask1 (unsigned int irq)
{
iop331_mask0 &= ~(1 << irq);
intctl_write0(iop331_mask0);
iop33x_mask0 &= ~(1 << irq);
intctl0_write(iop33x_mask0);
}
static void
iop331_irq_mask2 (unsigned int irq)
iop33x_irq_mask2 (unsigned int irq)
{
iop331_mask1 &= ~(1 << (irq - 32));
intctl_write1(iop331_mask1);
iop33x_mask1 &= ~(1 << (irq - 32));
intctl1_write(iop33x_mask1);
}
static void
iop331_irq_unmask1(unsigned int irq)
iop33x_irq_unmask1(unsigned int irq)
{
iop331_mask0 |= (1 << irq);
intctl_write0(iop331_mask0);
iop33x_mask0 |= 1 << irq;
intctl0_write(iop33x_mask0);
}
static void
iop331_irq_unmask2(unsigned int irq)
iop33x_irq_unmask2(unsigned int irq)
{
iop331_mask1 |= (1 << (irq - 32));
intctl_write1(iop331_mask1);
iop33x_mask1 |= (1 << (irq - 32));
intctl1_write(iop33x_mask1);
}
struct irq_chip iop331_irqchip1 = {
.name = "IOP-1",
.ack = iop331_irq_mask1,
.mask = iop331_irq_mask1,
.unmask = iop331_irq_unmask1,
struct irq_chip iop33x_irqchip1 = {
.name = "IOP33x-1",
.ack = iop33x_irq_mask1,
.mask = iop33x_irq_mask1,
.unmask = iop33x_irq_unmask1,
};
struct irq_chip iop331_irqchip2 = {
.name = "IOP-2",
.ack = iop331_irq_mask2,
.mask = iop331_irq_mask2,
.unmask = iop331_irq_unmask2,
struct irq_chip iop33x_irqchip2 = {
.name = "IOP33x-2",
.ack = iop33x_irq_mask2,
.mask = iop33x_irq_mask2,
.unmask = iop33x_irq_unmask2,
};
void __init iop331_init_irq(void)
void __init iop33x_init_irq(void)
{
unsigned int i;
int i;
intctl_write0(0); // disable all interrupts
intctl_write1(0);
intstr_write0(0); // treat all as IRQ
intstr_write1(0);
intctl0_write(0);
intctl1_write(0);
intstr0_write(0);
intstr1_write(0);
intbase_write(0);
intsize_write(1);
if(machine_is_iq80331()) // all interrupts are inputs to chip
if (machine_is_iq80331())
*IOP3XX_PCIIRSR = 0x0f;
for(i = 0; i < NR_IRQS; i++)
{
set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
for (i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
arch/arm/mach-iop33x/uart.c
浏览文件 @ c852ac80
/*
* linux/arch/arm/mach-iop33x/uart.c
* arch/arm/mach-iop33x/uart.c
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2004 Intel Corporation.
......@@ -17,7 +17,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
......@@ -30,14 +29,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define IOP331_UART_XTAL 33334000
#define IOP33X_UART_XTAL 33334000
static struct plat_serial8250_port iop33x_uart0_data[] = {
{
.membase = (char *)IOP331_UART0_VIRT,
.mapbase = IOP331_UART0_PHYS,
.irq = IRQ_IOP331_UART0,
.uartclk = IOP331_UART_XTAL,
.membase = (char *)IOP33X_UART0_VIRT,
.mapbase = IOP33X_UART0_PHYS,
.irq = IRQ_IOP33X_UART0,
.uartclk = IOP33X_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
......@@ -47,13 +46,13 @@ static struct plat_serial8250_port iop33x_uart0_data[] = {
static struct resource iop33x_uart0_resources[] = {
[0] = {
.start = IOP331_UART0_PHYS,
.end = IOP331_UART0_PHYS + 0x3f,
.start = IOP33X_UART0_PHYS,
.end = IOP33X_UART0_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART0,
.end = IRQ_IOP331_UART0,
.start = IRQ_IOP33X_UART0,
.end = IRQ_IOP33X_UART0,
.flags = IORESOURCE_IRQ,
},
};
......@@ -71,23 +70,23 @@ struct platform_device iop33x_uart0_device = {
static struct resource iop33x_uart1_resources[] = {
[0] = {
.start = IOP331_UART1_PHYS,
.end = IOP331_UART1_PHYS + 0x3f,
.start = IOP33X_UART1_PHYS,
.end = IOP33X_UART1_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART1,
.end = IRQ_IOP331_UART1,
.start = IRQ_IOP33X_UART1,
.end = IRQ_IOP33X_UART1,
.flags = IORESOURCE_IRQ,
},
};
static struct plat_serial8250_port iop33x_uart1_data[] = {
{
.membase = (char *)IOP331_UART1_VIRT,
.mapbase = IOP331_UART1_PHYS,
.irq = IRQ_IOP331_UART1,
.uartclk = IOP331_UART_XTAL,
.membase = (char *)IOP33X_UART1_VIRT,
.mapbase = IOP33X_UART1_PHYS,
.irq = IRQ_IOP33X_UART1,
.uartclk = IOP33X_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
......
arch/arm/oprofile/op_model_xscale.c
浏览文件 @ c852ac80
......@@ -37,10 +37,10 @@
#define XSCALE_PMU_IRQ IRQ_XS80200_PMU
#endif
#ifdef CONFIG_ARCH_IOP32X
#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU
#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU
#endif
#ifdef CONFIG_ARCH_IOP33X
#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU
#endif
#ifdef CONFIG_ARCH_PXA
#define XSCALE_PMU_IRQ IRQ_PMU
......@@ -88,7 +88,7 @@ static struct pmu_counter results[MAX_COUNTERS];
/*
* There are two versions of the PMU in current XScale processors
* with differing register layouts and number of performance counters.
* e.g. IOP321 is xsc1 whilst IOP331 is xsc2.
* e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
* We detect which register layout to use in xscale_detect_pmu()
*/
enum { PMU_XSC1, PMU_XSC2 };
......
arch/arm/plat-iop/i2c.c
浏览文件 @ c852ac80
......@@ -31,12 +31,12 @@
#include <asm/mach/arch.h>
#ifdef CONFIG_ARCH_IOP32X
#define IRQ_IOP3XX_I2C_0 IRQ_IOP321_I2C_0
#define IRQ_IOP3XX_I2C_1 IRQ_IOP321_I2C_1
#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0
#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1
#endif
#ifdef CONFIG_ARCH_IOP33X
#define IRQ_IOP3XX_I2C_0 IRQ_IOP331_I2C_0
#define IRQ_IOP3XX_I2C_1 IRQ_IOP331_I2C_1
#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0
#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1
#endif
static struct resource iop3xx_i2c0_resources[] = {
......
arch/arm/plat-iop/time.c
浏览文件 @ c852ac80
......@@ -26,10 +26,10 @@
#include <asm/mach/time.h>
#ifdef CONFIG_ARCH_IOP32X
#define IRQ_IOP3XX_TIMER0 IRQ_IOP321_TIMER0
#define IRQ_IOP3XX_TIMER0 IRQ_IOP32X_TIMER0
#else
#ifdef CONFIG_ARCH_IOP33X
#define IRQ_IOP3XX_TIMER0 IRQ_IOP331_TIMER0
#define IRQ_IOP3XX_TIMER0 IRQ_IOP33X_TIMER0
#endif
#endif
......
include/asm-arm/arch-iop32x/debug-macro.S
浏览文件 @ c852ac80
/* linux/include/asm-arm/arch-iop32x/debug-macro.S
/*
* include/asm-arm/arch-iop32x/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
*/
.macro addruart,rx
mov \rx, #0xfe000000 @ physical
.macro addruart, rx
mov \rx, #0xfe000000 @ physical as well as virtual
orr \rx, \rx, #0x00800000 @ location of the UART
.endm
......
include/asm-arm/arch-iop32x/dma.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/dma.h
* include/asm-arm/arch-iop32x/dma.h
*
* Copyright (C) 2004 Intel Corp.
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
include/asm-arm/arch-iop32x/entry-macro.S
浏览文件 @ c852ac80
......@@ -3,19 +3,16 @@
*
* Low-level IRQ helper macros for IOP32x-based platforms
*
* This file is licensed under the terms of the GNU General Public
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/irqs.h>
#include <asm/arch/iop32x.h>
.macro disable_fiq
.macro disable_fiq
.endm
/*
* Note: only deal with normal interrupts, not FIQ
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IOP3XX_REG_ADDR(0x07D8)
ldr \irqstat, [\base] @ Read IINTSRC
cmp \irqstat, #0
......
include/asm-arm/arch-iop32x/hardware.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/hardware.h
* include/asm-arm/arch-iop32x/hardware.h
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#ifndef __HARDWARE_H
#define __HARDWARE_H
#include <asm/types.h>
......@@ -13,21 +14,23 @@
* the IO resources.
*
* The PCI IO space is located at virtual 0xfe000000 from physical
* 0x90000000. The PCI BARs must be programmed with physical addresses,
* but when we read them, we convert them to virtual addresses. See
* arch/arm/mach-iop3xx/iop3xx-pci.c
* 0x90000000. The PCI BARs must be programmed with physical addresses,
* but when we read them, we convert them to virtual addresses. See
* arch/arm/plat-iop/pci.c.
*/
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0x00000000
#ifndef __ASSEMBLY__
void iop32x_init_irq(void);
#endif
/*
* Generic chipset bits
*
*/
#include "iop321.h"
#include "iop32x.h"
/*
* Board specific bits
......@@ -35,4 +38,5 @@
#include "iq80321.h"
#include "iq31244.h"
#endif /* _ASM_ARCH_HARDWARE_H */
#endif
include/asm-arm/arch-iop32x/io.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/io.h
* include/asm-arm/arch-iop32x/io.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#ifndef __IO_H
#define __IO_H
#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
#define __mem_pci(a) (a)
#endif
include/asm-arm/arch-iop32x/iop321.h 已删除 100644 → 0
浏览文件 @ 475549fa
/*
* linux/include/asm/arch-iop32x/iop321.h
*
* Intel IOP321 Chip definitions
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _IOP321_HW_H_
#define _IOP321_HW_H_
/*
* This is needed for mixed drivers that need to work on all
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#define iop_is_321() 1
#endif
/*
* IOP321 chipset registers
*/
#define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/
#define IOP321_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */
#define IOP321_REG_ADDR(reg) (IOP321_VIRT_MEM_BASE | (reg))
/* Reserved 0x00000000 through 0x000000FF */
/* Address Translation Unit 0x00000100 through 0x000001FF */
/* Messaging Unit 0x00000300 through 0x000003FF */
/* DMA Controller 0x00000400 through 0x000004FF */
/* Memory controller 0x00000500 through 0x0005FF */
/* Peripheral bus interface unit 0x00000680 through 0x0006FF */
/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */
/* Internal arbitration unit 0x00000780 through 0x0007BF */
#define IOP321_IACR (volatile u32 *)IOP321_REG_ADDR(0x00000780)
#define IOP321_MTTR1 (volatile u32 *)IOP321_REG_ADDR(0x00000784)
#define IOP321_MTTR2 (volatile u32 *)IOP321_REG_ADDR(0x00000788)
/* General Purpose I/O Registers */
#define IOP321_GPOE (volatile u32 *)IOP321_REG_ADDR(0x000007C4)
#define IOP321_GPID (volatile u32 *)IOP321_REG_ADDR(0x000007C8)
#define IOP321_GPOD (volatile u32 *)IOP321_REG_ADDR(0x000007CC)
/* Interrupt Controller */
#define IOP321_INTCTL (volatile u32 *)IOP321_REG_ADDR(0x000007D0)
#define IOP321_INTSTR (volatile u32 *)IOP321_REG_ADDR(0x000007D4)
#define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8)
#define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC)
/* Application accelerator unit 0x00000800 - 0x000008FF */
/* SSP serial port unit 0x00001600 - 0x0000167F */
/* I2C bus interface unit 0x00001680 - 0x000016FF */
/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */
/*
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
#include <asm/hardware/iop3xx.h>
#ifndef __ASSEMBLY__
extern void iop321_init_irq(void);
extern void iop321_time_init(void);
#endif
#endif // _IOP321_HW_H_
include/asm-arm/arch-iop32x/iop32x.h 0 → 100644
浏览文件 @ c852ac80
/*
* include/asm-arm/arch-iop32x/iop32x.h
*
* Intel IOP32X Chip definitions
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __IOP32X_H
#define __IOP32X_H
/*
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
#include <asm/hardware/iop3xx.h>
#endif
include/asm-arm/arch-iop32x/iq31244.h
浏览文件 @ c852ac80
/*
* linux/include/asm/arch-iop32x/iq31244.h
* include/asm-arm/arch-iop32x/iq31244.h
*
* Intel IQ31244 evaluation board registers
*/
#ifndef _IQ31244_H_
#define _IQ31244_H_
#ifndef __IQ31244_H
#define __IQ31244_H
#define IQ31244_UART 0xfe800000 /* UART #1 */
#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
......@@ -14,4 +14,4 @@
#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
#endif // _IQ31244_H_
#endif
include/asm-arm/arch-iop32x/iq80321.h
浏览文件 @ c852ac80
/*
* linux/include/asm/arch-iop32x/iq80321.h
* include/asm-arm/arch-iop32x/iq80321.h
*
* Intel IQ80321 evaluation board registers
*/
#ifndef _IQ80321_H_
#define _IQ80321_H_
#ifndef __IQ80321_H
#define __IQ80321_H
#define IQ80321_UART 0xfe800000 /* UART #1 */
#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
......@@ -14,4 +14,4 @@
#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
#endif // _IQ80321_H_
#endif
include/asm-arm/arch-iop32x/irqs.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/irqs.h
* include/asm-arm/arch-iop32x/irqs.h
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright: (C) 2002 Rory Bolt
......@@ -7,44 +7,44 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _IRQS_H_
#define _IRQS_H_
#ifndef __IRQS_H
#define __IRQS_H
/*
* IOP80321 chipset interrupts
*/
#define IRQ_IOP321_DMA0_EOT 0
#define IRQ_IOP321_DMA0_EOC 1
#define IRQ_IOP321_DMA1_EOT 2
#define IRQ_IOP321_DMA1_EOC 3
#define IRQ_IOP321_AA_EOT 6
#define IRQ_IOP321_AA_EOC 7
#define IRQ_IOP321_CORE_PMON 8
#define IRQ_IOP321_TIMER0 9
#define IRQ_IOP321_TIMER1 10
#define IRQ_IOP321_I2C_0 11
#define IRQ_IOP321_I2C_1 12
#define IRQ_IOP321_MESSAGING 13
#define IRQ_IOP321_ATU_BIST 14
#define IRQ_IOP321_PERFMON 15
#define IRQ_IOP321_CORE_PMU 16
#define IRQ_IOP321_BIU_ERR 17
#define IRQ_IOP321_ATU_ERR 18
#define IRQ_IOP321_MCU_ERR 19
#define IRQ_IOP321_DMA0_ERR 20
#define IRQ_IOP321_DMA1_ERR 21
#define IRQ_IOP321_AA_ERR 23
#define IRQ_IOP321_MSG_ERR 24
#define IRQ_IOP321_SSP 25
#define IRQ_IOP321_XINT0 27
#define IRQ_IOP321_XINT1 28
#define IRQ_IOP321_XINT2 29
#define IRQ_IOP321_XINT3 30
#define IRQ_IOP321_HPI 31
#define IRQ_IOP32X_DMA0_EOT 0
#define IRQ_IOP32X_DMA0_EOC 1
#define IRQ_IOP32X_DMA1_EOT 2
#define IRQ_IOP32X_DMA1_EOC 3
#define IRQ_IOP32X_AA_EOT 6
#define IRQ_IOP32X_AA_EOC 7
#define IRQ_IOP32X_CORE_PMON 8
#define IRQ_IOP32X_TIMER0 9
#define IRQ_IOP32X_TIMER1 10
#define IRQ_IOP32X_I2C_0 11
#define IRQ_IOP32X_I2C_1 12
#define IRQ_IOP32X_MESSAGING 13
#define IRQ_IOP32X_ATU_BIST 14
#define IRQ_IOP32X_PERFMON 15
#define IRQ_IOP32X_CORE_PMU 16
#define IRQ_IOP32X_BIU_ERR 17
#define IRQ_IOP32X_ATU_ERR 18
#define IRQ_IOP32X_MCU_ERR 19
#define IRQ_IOP32X_DMA0_ERR 20
#define IRQ_IOP32X_DMA1_ERR 21
#define IRQ_IOP32X_AA_ERR 23
#define IRQ_IOP32X_MSG_ERR 24
#define IRQ_IOP32X_SSP 25
#define IRQ_IOP32X_XINT0 27
#define IRQ_IOP32X_XINT1 28
#define IRQ_IOP32X_XINT2 29
#define IRQ_IOP32X_XINT3 30
#define IRQ_IOP32X_HPI 31
#define NR_IRQS 32
#endif // _IRQ_H_
#endif
include/asm-arm/arch-iop32x/memory.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/memory.h
* include/asm-arm/arch-iop32x/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#ifndef __MEMORY_H
#define __MEMORY_H
#include <asm/hardware.h>
......@@ -19,7 +19,6 @@
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2)))
......
include/asm-arm/arch-iop32x/system.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/system.h
* include/asm-arm/arch-iop32x/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -13,17 +13,10 @@ static inline void arch_idle(void)
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
*IOP3XX_PCSR = 0x30;
*IOP3XX_PCSR = 0x30;
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
cpu_reset(0);
} else {
/* No on-chip reset capability */
cpu_reset(0);
}
/* Jump into ROM at address 0 */
cpu_reset(0);
}
include/asm-arm/arch-iop32x/timex.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/timex.h
* include/asm-arm/arch-iop32x/timex.h
*
* IOP3xx architecture timex specifications
* IOP32x architecture timex specifications
*/
#include <asm/hardware.h>
#define CLOCK_TICK_RATE (100 * HZ)
include/asm-arm/arch-iop32x/uncompress.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/uncompress.h
* include/asm-arm/arch-iop32x/uncompress.h
*/
#include <asm/types.h>
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
......@@ -8,13 +9,13 @@
static volatile u8 *uart_base;
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
static inline void putc(char c)
{
while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
barrier();
*uart_base = c;
uart_base[UART_TX] = c;
}
static inline void flush(void)
......
include/asm-arm/arch-iop32x/vmalloc.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop32x/vmalloc.h
* include/asm-arm/arch-iop32x/vmalloc.h
*/
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
//#define VMALLOC_END (0xe8000000)
/* increase usable physical RAM to ~992M per RMK */
#define VMALLOC_END (0xfe000000)
#define VMALLOC_END 0xfe000000
include/asm-arm/arch-iop33x/debug-macro.S
浏览文件 @ c852ac80
/* linux/include/asm-arm/arch-iop33x/debug-macro.S
/*
* include/asm-arm/arch-iop33x/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
*/
.macro addruart,rx
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
......
include/asm-arm/arch-iop33x/dma.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/dma.h
* include/asm-arm/arch-iop33x/dma.h
*
* Copyright (C) 2004 Intel Corp.
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
include/asm-arm/arch-iop33x/entry-macro.S
浏览文件 @ c852ac80
......@@ -3,16 +3,16 @@
*
* Low-level IRQ helper macros for IOP33x-based platforms
*
* This file is licensed under the terms of the GNU General Public
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/irqs.h>
#include <asm/arch/iop33x.h>
.macro disable_fiq
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IOP3XX_REG_ADDR(0x07C8)
ldr \irqstat, [\base] @ Read IINTVEC
cmp \irqstat, #0
......
include/asm-arm/arch-iop33x/hardware.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/hardware.h
* include/asm-arm/arch-iop33x/hardware.h
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#ifndef __HARDWARE_H
#define __HARDWARE_H
#include <asm/types.h>
......@@ -15,14 +16,15 @@
* The PCI IO space is located at virtual 0xfe000000 from physical
* 0x90000000. The PCI BARs must be programmed with physical addresses,
* but when we read them, we convert them to virtual addresses. See
* arch/arm/mach-iop33x/pci.c
* arch/arm/mach-iop3xx/iop3xx-pci.c
*/
#define pcibios_assign_all_busses() 1
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0x00000000
#ifndef __ASSEMBLY__
void iop33x_init_irq(void);
extern struct platform_device iop33x_uart0_device;
extern struct platform_device iop33x_uart1_device;
#endif
......@@ -32,7 +34,7 @@ extern struct platform_device iop33x_uart1_device;
* Generic chipset bits
*
*/
#include "iop331.h"
#include "iop33x.h"
/*
* Board specific bits
......@@ -40,4 +42,5 @@ extern struct platform_device iop33x_uart1_device;
#include "iq80331.h"
#include "iq80332.h"
#endif /* _ASM_ARCH_HARDWARE_H */
#endif
include/asm-arm/arch-iop33x/io.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/io.h
* include/asm-arm/arch-iop33x/io.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#ifndef __IO_H
#define __IO_H
#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
#define __mem_pci(a) (a)
#endif
include/asm-arm/arch-iop33x/iop331.h 已删除 100644 → 0
浏览文件 @ 475549fa
/*
* linux/include/asm/arch-iop33x/iop331.h
*
* Intel IOP331 Chip definitions
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2003, 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _IOP331_HW_H_
#define _IOP331_HW_H_
/*
* This is needed for mixed drivers that need to work on all
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#define iop_is_331() 1
#endif
/*
* IOP331 chipset registers
*/
#define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/
#define IOP331_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */
#define IOP331_REG_ADDR(reg) (IOP331_VIRT_MEM_BASE | (reg))
/* Reserved 0x00000000 through 0x000000FF */
/* Address Translation Unit 0x00000100 through 0x000001FF */
/* Messaging Unit 0x00000300 through 0x000003FF */
/* DMA Controller 0x00000400 through 0x000004FF */
/* Memory controller 0x00000500 through 0x0005FF */
/* Peripheral bus interface unit 0x00000680 through 0x0006FF */
/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */
/* Internal arbitration unit 0x00000780 through 0x0007BF */
/* Interrupt Controller */
#define IOP331_INTCTL0 (volatile u32 *)IOP331_REG_ADDR(0x00000790)
#define IOP331_INTCTL1 (volatile u32 *)IOP331_REG_ADDR(0x00000794)
#define IOP331_INTSTR0 (volatile u32 *)IOP331_REG_ADDR(0x00000798)
#define IOP331_INTSTR1 (volatile u32 *)IOP331_REG_ADDR(0x0000079C)
#define IOP331_IINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A0)
#define IOP331_IINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007A4)
#define IOP331_FINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A8)
#define IOP331_FINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007AC)
#define IOP331_IPR0 (volatile u32 *)IOP331_REG_ADDR(0x000007B0)
#define IOP331_IPR1 (volatile u32 *)IOP331_REG_ADDR(0x000007B4)
#define IOP331_IPR2 (volatile u32 *)IOP331_REG_ADDR(0x000007B8)
#define IOP331_IPR3 (volatile u32 *)IOP331_REG_ADDR(0x000007BC)
#define IOP331_INTBASE (volatile u32 *)IOP331_REG_ADDR(0x000007C0)
#define IOP331_INTSIZE (volatile u32 *)IOP331_REG_ADDR(0x000007C4)
#define IOP331_IINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007C8)
#define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC)
/* Application accelerator unit 0x00000800 - 0x000008FF */
#define IOP331_SPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C0)
#define IOP331_PPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C8)
/* SSP serial port unit 0x00001600 - 0x0000167F */
/* I2C bus interface unit 0x00001680 - 0x000016FF */
/* 0x00001700 through 0x0000172C UART 0 */
/* Reserved 0x00001730 through 0x0000173F */
/* 0x00001740 through 0x0000176C UART 1 */
#define IOP331_UART0_PHYS (IOP331_PHYS_MEM_BASE | 0x00001700) /* UART #1 physical */
#define IOP331_UART1_PHYS (IOP331_PHYS_MEM_BASE | 0x00001740) /* UART #2 physical */
#define IOP331_UART0_VIRT (IOP331_VIRT_MEM_BASE | 0x00001700) /* UART #1 virtual addr */
#define IOP331_UART1_VIRT (IOP331_VIRT_MEM_BASE | 0x00001740) /* UART #2 virtual addr */
/* Reserved 0x00001770 through 0x0000177F */
/* General Purpose I/O Registers */
#define IOP331_GPOE (volatile u32 *)IOP331_REG_ADDR(0x00001780)
#define IOP331_GPID (volatile u32 *)IOP331_REG_ADDR(0x00001784)
#define IOP331_GPOD (volatile u32 *)IOP331_REG_ADDR(0x00001788)
/* Reserved 0x0000178c through 0x000019ff */
/*
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
#include <asm/hardware/iop3xx.h>
#ifndef __ASSEMBLY__
extern void iop331_init_irq(void);
extern void iop331_time_init(void);
#endif
#endif // _IOP331_HW_H_
include/asm-arm/arch-iop33x/iop33x.h 0 → 100644
浏览文件 @ c852ac80
/*
* include/asm-arm/arch-iop33x/iop33x.h
*
* Intel IOP33X Chip definitions
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2003, 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __IOP33X_H
#define __IOP33X_H
/*
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
#include <asm/hardware/iop3xx.h>
/* UARTs */
#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
#endif
include/asm-arm/arch-iop33x/iq80331.h
浏览文件 @ c852ac80
/*
* linux/include/asm/arch-iop33x/iq80331.h
* include/asm-arm/arch-iop33x/iq80331.h
*
* Intel IQ80331 evaluation board registers
*/
#ifndef _IQ80331_H_
#define _IQ80331_H_
#ifndef __IQ80331_H
#define __IQ80331_H
#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
......@@ -13,4 +13,4 @@
#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
#endif // _IQ80331_H_
#endif
include/asm-arm/arch-iop33x/iq80332.h
浏览文件 @ c852ac80
/*
* linux/include/asm/arch-iop33x/iq80332.h
* include/asm-arm/arch-iop33x/iq80332.h
*
* Intel IQ80332 evaluation board registers
*/
#ifndef _IQ80332_H_
#define _IQ80332_H_
#ifndef __IQ80332_H
#define __IQ80332_H
#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
......@@ -13,4 +13,4 @@
#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
#endif // _IQ80332_H_
#endif
include/asm-arm/arch-iop33x/irqs.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/irqs.h
* include/asm-arm/arch-iop33x/irqs.h
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright: (C) 2003 Intel Corp.
......@@ -7,54 +7,54 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _IRQS_H_
#define _IRQS_H_
#ifndef __IRQS_H
#define __IRQS_H
/*
* IOP80331 chipset interrupts
*/
#define IRQ_IOP331_DMA0_EOT 0
#define IRQ_IOP331_DMA0_EOC 1
#define IRQ_IOP331_DMA1_EOT 2
#define IRQ_IOP331_DMA1_EOC 3
#define IRQ_IOP331_AA_EOT 6
#define IRQ_IOP331_AA_EOC 7
#define IRQ_IOP331_TIMER0 8
#define IRQ_IOP331_TIMER1 9
#define IRQ_IOP331_I2C_0 10
#define IRQ_IOP331_I2C_1 11
#define IRQ_IOP331_MSG 12
#define IRQ_IOP331_MSGIBQ 13
#define IRQ_IOP331_ATU_BIST 14
#define IRQ_IOP331_PERFMON 15
#define IRQ_IOP331_CORE_PMU 16
#define IRQ_IOP331_XINT0 24
#define IRQ_IOP331_XINT1 25
#define IRQ_IOP331_XINT2 26
#define IRQ_IOP331_XINT3 27
#define IRQ_IOP331_XINT8 32
#define IRQ_IOP331_XINT9 33
#define IRQ_IOP331_XINT10 34
#define IRQ_IOP331_XINT11 35
#define IRQ_IOP331_XINT12 36
#define IRQ_IOP331_XINT13 37
#define IRQ_IOP331_XINT14 38
#define IRQ_IOP331_XINT15 39
#define IRQ_IOP331_UART0 51
#define IRQ_IOP331_UART1 52
#define IRQ_IOP331_PBIE 53
#define IRQ_IOP331_ATU_CRW 54
#define IRQ_IOP331_ATU_ERR 55
#define IRQ_IOP331_MCU_ERR 56
#define IRQ_IOP331_DMA0_ERR 57
#define IRQ_IOP331_DMA1_ERR 58
#define IRQ_IOP331_AA_ERR 60
#define IRQ_IOP331_MSG_ERR 62
#define IRQ_IOP331_HPI 63
#define IRQ_IOP33X_DMA0_EOT 0
#define IRQ_IOP33X_DMA0_EOC 1
#define IRQ_IOP33X_DMA1_EOT 2
#define IRQ_IOP33X_DMA1_EOC 3
#define IRQ_IOP33X_AA_EOT 6
#define IRQ_IOP33X_AA_EOC 7
#define IRQ_IOP33X_TIMER0 8
#define IRQ_IOP33X_TIMER1 9
#define IRQ_IOP33X_I2C_0 10
#define IRQ_IOP33X_I2C_1 11
#define IRQ_IOP33X_MSG 12
#define IRQ_IOP33X_MSGIBQ 13
#define IRQ_IOP33X_ATU_BIST 14
#define IRQ_IOP33X_PERFMON 15
#define IRQ_IOP33X_CORE_PMU 16
#define IRQ_IOP33X_XINT0 24
#define IRQ_IOP33X_XINT1 25
#define IRQ_IOP33X_XINT2 26
#define IRQ_IOP33X_XINT3 27
#define IRQ_IOP33X_XINT8 32
#define IRQ_IOP33X_XINT9 33
#define IRQ_IOP33X_XINT10 34
#define IRQ_IOP33X_XINT11 35
#define IRQ_IOP33X_XINT12 36
#define IRQ_IOP33X_XINT13 37
#define IRQ_IOP33X_XINT14 38
#define IRQ_IOP33X_XINT15 39
#define IRQ_IOP33X_UART0 51
#define IRQ_IOP33X_UART1 52
#define IRQ_IOP33X_PBIE 53
#define IRQ_IOP33X_ATU_CRW 54
#define IRQ_IOP33X_ATU_ERR 55
#define IRQ_IOP33X_MCU_ERR 56
#define IRQ_IOP33X_DMA0_ERR 57
#define IRQ_IOP33X_DMA1_ERR 58
#define IRQ_IOP33X_AA_ERR 60
#define IRQ_IOP33X_MSG_ERR 62
#define IRQ_IOP33X_HPI 63
#define NR_IRQS 64
#endif // _IRQ_H_
#endif
include/asm-arm/arch-iop33x/memory.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/memory.h
* include/asm-arm/arch-iop33x/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#ifndef __MEMORY_H
#define __MEMORY_H
#include <asm/hardware.h>
......
include/asm-arm/arch-iop33x/system.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/system.h
* include/asm-arm/arch-iop33x/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -13,17 +13,10 @@ static inline void arch_idle(void)
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
*IOP3XX_PCSR = 0x30;
*IOP3XX_PCSR = 0x30;
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
cpu_reset(0);
} else {
/* No on-chip reset capability */
cpu_reset(0);
}
/* Jump into ROM at address 0 */
cpu_reset(0);
}
include/asm-arm/arch-iop33x/timex.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/timex.h
* include/asm-arm/arch-iop33x/timex.h
*
* IOP3xx architecture timex specifications
*/
#include <asm/hardware.h>
#define CLOCK_TICK_RATE (100 * HZ)
include/asm-arm/arch-iop33x/uncompress.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/uncompress.h
* include/asm-arm/arch-iop33x/uncompress.h
*/
#include <asm/types.h>
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
......@@ -8,13 +9,13 @@
static volatile u32 *uart_base;
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
static inline void putc(char c)
{
while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
barrier();
*uart_base = c;
uart_base[UART_TX] = c;
}
static inline void flush(void)
......@@ -24,7 +25,7 @@ static inline void flush(void)
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
if (machine_is_iq80331() || machine_is_iq80332())
uart_base = (volatile u32 *)IOP331_UART0_PHYS;
uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
else
uart_base = (volatile u32 *)0xfe800000;
}
......
include/asm-arm/arch-iop33x/vmalloc.h
浏览文件 @ c852ac80
/*
* linux/include/asm-arm/arch-iop33x/vmalloc.h
* include/asm-arm/arch-iop33x/vmalloc.h
*/
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
//#define VMALLOC_END (0xe8000000)
/* increase usable physical RAM to ~992M per RMK */
#define VMALLOC_END (0xfe000000)
#define VMALLOC_END 0xfe000000
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或