[media] v4l: s5p-tv: add SDO driver for Samsung S5P platform

Add drivers for Standard Definition output (SDO) on Samsung platforms
from S5P family. The driver provides control over streaming analog TV
via Composite connector.

Driver is using:
- v4l2 framework
- runtime PM
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/s5p-tv/Kconfig

@@ -46,4 +46,15 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY
 	  as module. It is an I2C driver, that exposes a V4L2
 	  subdev for use by other drivers.
 
+config VIDEO_SAMSUNG_S5P_SDO
+	tristate "Samsung Analog TV Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the analog TV output
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an auxiliary driver, that exposes a V4L2
+	  subdev for use by other drivers. This driver requires
+	  hdmiphy driver to work correctly.
+
 endif # VIDEO_SAMSUNG_S5P_TV

drivers/media/video/s5p-tv/Makefile

@@ -10,4 +10,6 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
 s5p-hdmiphy-y += hdmiphy_drv.o
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
 s5p-hdmi-y += hdmi_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o
+s5p-sdo-y += sdo_drv.o
 

drivers/media/video/s5p-tv/regs-sdo.h

+/* drivers/media/video/s5p-tv/regs-sdo.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SDO register description file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_SDO_H
+#define SAMSUNG_REGS_SDO_H
+
+/*
+ * Register part
+ */
+
+#define SDO_CLKCON			0x0000
+#define SDO_CONFIG			0x0008
+#define SDO_VBI				0x0014
+#define SDO_DAC				0x003C
+#define SDO_CCCON			0x0180
+#define SDO_IRQ				0x0280
+#define SDO_IRQMASK			0x0284
+#define SDO_VERSION			0x03D8
+
+/*
+ * Bit definition part
+ */
+
+/* SDO Clock Control Register (SDO_CLKCON) */
+#define SDO_TVOUT_SW_RESET		(1 << 4)
+#define SDO_TVOUT_CLOCK_READY		(1 << 1)
+#define SDO_TVOUT_CLOCK_ON		(1 << 0)
+
+/* SDO Video Standard Configuration Register (SDO_CONFIG) */
+#define SDO_PROGRESSIVE			(1 << 4)
+#define SDO_NTSC_M			0
+#define SDO_PAL_M			1
+#define SDO_PAL_BGHID			2
+#define SDO_PAL_N			3
+#define SDO_PAL_NC			4
+#define SDO_NTSC_443			8
+#define SDO_PAL_60			9
+#define SDO_STANDARD_MASK		0xf
+
+/* SDO VBI Configuration Register (SDO_VBI) */
+#define SDO_CVBS_WSS_INS		(1 << 14)
+#define SDO_CVBS_CLOSED_CAPTION_MASK	(3 << 12)
+
+/* SDO DAC Configuration Register (SDO_DAC) */
+#define SDO_POWER_ON_DAC		(1 << 0)
+
+/* SDO Color Compensation On/Off Control (SDO_CCCON) */
+#define SDO_COMPENSATION_BHS_ADJ_OFF	(1 << 4)
+#define SDO_COMPENSATION_CVBS_COMP_OFF	(1 << 0)
+
+/* SDO Interrupt Request Register (SDO_IRQ) */
+#define SDO_VSYNC_IRQ_PEND		(1 << 0)
+
+#endif /* SAMSUNG_REGS_SDO_H */

drivers/media/video/s5p-tv/sdo_drv.c

+/*
+ * Samsung Standard Definition Output (SDO) driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "regs-sdo.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)");
+MODULE_LICENSE("GPL");
+
+#define SDO_DEFAULT_STD	V4L2_STD_PAL
+
+struct sdo_format {
+	v4l2_std_id id;
+	/* all modes are 720 pixels wide */
+	unsigned int height;
+	unsigned int cookie;
+};
+
+struct sdo_device {
+	/** pointer to device parent */
+	struct device *dev;
+	/** base address of SDO registers */
+	void __iomem *regs;
+	/** SDO interrupt */
+	unsigned int irq;
+	/** DAC source clock */
+	struct clk *sclk_dac;
+	/** DAC clock */
+	struct clk *dac;
+	/** DAC physical interface */
+	struct clk *dacphy;
+	/** clock for control of VPLL */
+	struct clk *fout_vpll;
+	/** regulator for SDO IP power */
+	struct regulator *vdac;
+	/** regulator for SDO plug detection */
+	struct regulator *vdet;
+	/** subdev used as device interface */
+	struct v4l2_subdev sd;
+	/** current format */
+	const struct sdo_format *fmt;
+};
+
+static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct sdo_device, sd);
+}
+
+static inline
+void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask)
+{
+	u32 old = readl(sdev->regs + reg_id);
+	value = (value & mask) | (old & ~mask);
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value)
+{
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+u32 sdo_read(struct sdo_device *sdev, u32 reg_id)
+{
+	return readl(sdev->regs + reg_id);
+}
+
+static irqreturn_t sdo_irq_handler(int irq, void *dev_data)
+{
+	struct sdo_device *sdev = dev_data;
+
+	/* clear interrupt */
+	sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND);
+	return IRQ_HANDLED;
+}
+
+static void sdo_reg_debug(struct sdo_device *sdev)
+{
+#define DBGREG(reg_id) \
+	dev_info(sdev->dev, #reg_id " = %08x\n", \
+		sdo_read(sdev, reg_id))
+
+	DBGREG(SDO_CLKCON);
+	DBGREG(SDO_CONFIG);
+	DBGREG(SDO_VBI);
+	DBGREG(SDO_DAC);
+	DBGREG(SDO_IRQ);
+	DBGREG(SDO_IRQMASK);
+	DBGREG(SDO_VERSION);
+}
+
+static const struct sdo_format sdo_format[] = {
+	{ V4L2_STD_PAL_N,	.height = 576, .cookie = SDO_PAL_N },
+	{ V4L2_STD_PAL_Nc,	.height = 576, .cookie = SDO_PAL_NC },
+	{ V4L2_STD_PAL_M,	.height = 480, .cookie = SDO_PAL_M },
+	{ V4L2_STD_PAL_60,	.height = 480, .cookie = SDO_PAL_60 },
+	{ V4L2_STD_NTSC_443,	.height = 480, .cookie = SDO_NTSC_443 },
+	{ V4L2_STD_PAL,		.height = 576, .cookie = SDO_PAL_BGHID },
+	{ V4L2_STD_NTSC_M,	.height = 480, .cookie = SDO_NTSC_M },
+};
+
+static const struct sdo_format *sdo_find_format(v4l2_std_id id)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(sdo_format); ++i)
+		if (sdo_format[i].id & id)
+			return &sdo_format[i];
+	return NULL;
+}
+
+static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL |
+		V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
+		V4L2_STD_NTSC_443 | V4L2_STD_PAL_60;
+	return 0;
+}
+
+static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	const struct sdo_format *fmt;
+	fmt = sdo_find_format(std);
+	if (fmt == NULL)
+		return -EINVAL;
+	sdev->fmt = fmt;
+	return 0;
+}
+
+static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = sd_to_sdev(sd)->fmt->id;
+	return 0;
+}
+
+static int sdo_g_mbus_fmt(struct v4l2_subdev *sd,
+	struct v4l2_mbus_framefmt *fmt)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	if (!sdev->fmt)
+		return -ENXIO;
+	/* all modes are 720 pixels wide */
+	fmt->width = 720;
+	fmt->height = sdev->fmt->height;
+	fmt->code = V4L2_MBUS_FMT_FIXED;
+	fmt->field = V4L2_FIELD_INTERLACED;
+	return 0;
+}
+
+static int sdo_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	struct device *dev = sdev->dev;
+	int ret;
+
+	dev_info(dev, "sdo_s_power(%d)\n", on);
+
+	if (on)
+		ret = pm_runtime_get_sync(dev);
+	else
+		ret = pm_runtime_put_sync(dev);
+
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int sdo_streamon(struct sdo_device *sdev)
+{
+	/* set proper clock for Timing Generator */
+	clk_set_rate(sdev->fout_vpll, 54000000);
+	dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
+	clk_get_rate(sdev->fout_vpll));
+	/* enable clock in SDO */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
+	clk_enable(sdev->dacphy);
+	/* enable DAC */
+	sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static int sdo_streamoff(struct sdo_device *sdev)
+{
+	int tries;
+
+	sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
+	clk_disable(sdev->dacphy);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
+	for (tries = 100; tries; --tries) {
+		if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
+			break;
+		mdelay(1);
+	}
+	if (tries == 0)
+		dev_err(sdev->dev, "failed to stop streaming\n");
+	return tries ? 0 : -EIO;
+}
+
+static int sdo_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	return on ? sdo_streamon(sdev) : sdo_streamoff(sdev);
+}
+
+static const struct v4l2_subdev_core_ops sdo_sd_core_ops = {
+	.s_power = sdo_s_power,
+};
+
+static const struct v4l2_subdev_video_ops sdo_sd_video_ops = {
+	.s_std_output = sdo_s_std_output,
+	.g_std_output = sdo_g_std_output,
+	.g_tvnorms_output = sdo_g_tvnorms_output,
+	.g_mbus_fmt = sdo_g_mbus_fmt,
+	.s_stream = sdo_s_stream,
+};
+
+static const struct v4l2_subdev_ops sdo_sd_ops = {
+	.core = &sdo_sd_core_ops,
+	.video = &sdo_sd_video_ops,
+};
+
+static int sdo_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "suspend\n");
+	regulator_disable(sdev->vdet);
+	regulator_disable(sdev->vdac);
+	clk_disable(sdev->sclk_dac);
+	return 0;
+}
+
+static int sdo_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "resume\n");
+	clk_enable(sdev->sclk_dac);
+	regulator_enable(sdev->vdac);
+	regulator_enable(sdev->vdet);
+
+	/* software reset */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET);
+	mdelay(10);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET);
+
+	/* setting TV mode */
+	sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK);
+	/* XXX: forcing interlaced mode using undocumented bit */
+	sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE);
+	/* turn all VBI off */
+	sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS |
+		SDO_CVBS_CLOSED_CAPTION_MASK);
+	/* turn all post processing off */
+	sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF |
+		SDO_COMPENSATION_CVBS_COMP_OFF);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static const struct dev_pm_ops sdo_pm_ops = {
+	.runtime_suspend = sdo_runtime_suspend,
+	.runtime_resume	 = sdo_runtime_resume,
+};
+
+static int __devinit sdo_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sdo_device *sdev;
+	struct resource *res;
+	int ret = 0;
+	struct clk *sclk_vpll;
+
+	dev_info(dev, "probe start\n");
+	sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+	if (!sdev) {
+		dev_err(dev, "not enough memory.\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	sdev->dev = dev;
+
+	/* mapping registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	sdev->regs = ioremap(res->start, resource_size(res));
+	if (sdev->regs == NULL) {
+		dev_err(dev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	/* acquiring interrupt */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_regs;
+	}
+	ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev);
+	if (ret) {
+		dev_err(dev, "request interrupt failed.\n");
+		goto fail_regs;
+	}
+	sdev->irq = res->start;
+
+	/* acquire clocks */
+	sdev->sclk_dac = clk_get(dev, "sclk_dac");
+	if (IS_ERR_OR_NULL(sdev->sclk_dac)) {
+		dev_err(dev, "failed to get clock 'sclk_dac'\n");
+		ret = -ENXIO;
+		goto fail_irq;
+	}
+	sdev->dac = clk_get(dev, "dac");
+	if (IS_ERR_OR_NULL(sdev->dac)) {
+		dev_err(dev, "failed to get clock 'dac'\n");
+		ret = -ENXIO;
+		goto fail_sclk_dac;
+	}
+	sdev->dacphy = clk_get(dev, "dacphy");
+	if (IS_ERR_OR_NULL(sdev->dacphy)) {
+		dev_err(dev, "failed to get clock 'dacphy'\n");
+		ret = -ENXIO;
+		goto fail_dac;
+	}
+	sclk_vpll = clk_get(dev, "sclk_vpll");
+	if (IS_ERR_OR_NULL(sclk_vpll)) {
+		dev_err(dev, "failed to get clock 'sclk_vpll'\n");
+		ret = -ENXIO;
+		goto fail_dacphy;
+	}
+	clk_set_parent(sdev->sclk_dac, sclk_vpll);
+	clk_put(sclk_vpll);
+	sdev->fout_vpll = clk_get(dev, "fout_vpll");
+	if (IS_ERR_OR_NULL(sdev->fout_vpll)) {
+		dev_err(dev, "failed to get clock 'fout_vpll'\n");
+		goto fail_dacphy;
+	}
+	dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll));
+
+	/* acquire regulator */
+	sdev->vdac = regulator_get(dev, "vdd33a_dac");
+	if (IS_ERR_OR_NULL(sdev->vdac)) {
+		dev_err(dev, "failed to get regulator 'vdac'\n");
+		goto fail_fout_vpll;
+	}
+	sdev->vdet = regulator_get(dev, "vdet");
+	if (IS_ERR_OR_NULL(sdev->vdet)) {
+		dev_err(dev, "failed to get regulator 'vdet'\n");
+		goto fail_vdac;
+	}
+
+	/* enable gate for dac clock, because mixer uses it */
+	clk_enable(sdev->dac);
+
+	/* configure power management */
+	pm_runtime_enable(dev);
+
+	/* configuration of interface subdevice */
+	v4l2_subdev_init(&sdev->sd, &sdo_sd_ops);
+	sdev->sd.owner = THIS_MODULE;
+	strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name);
+
+	/* set default format */
+	sdev->fmt = sdo_find_format(SDO_DEFAULT_STD);
+	BUG_ON(sdev->fmt == NULL);
+
+	/* keeping subdev in device's private for use by other drivers */
+	dev_set_drvdata(dev, &sdev->sd);
+
+	dev_info(dev, "probe succeeded\n");
+	return 0;
+
+fail_vdac:
+	regulator_put(sdev->vdac);
+fail_fout_vpll:
+	clk_put(sdev->fout_vpll);
+fail_dacphy:
+	clk_put(sdev->dacphy);
+fail_dac:
+	clk_put(sdev->dac);
+fail_sclk_dac:
+	clk_put(sdev->sclk_dac);
+fail_irq:
+	free_irq(sdev->irq, sdev);
+fail_regs:
+	iounmap(sdev->regs);
+fail_sdev:
+	kfree(sdev);
+fail:
+	dev_info(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit sdo_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	pm_runtime_disable(&pdev->dev);
+	clk_disable(sdev->dac);
+	regulator_put(sdev->vdet);
+	regulator_put(sdev->vdac);
+	clk_put(sdev->fout_vpll);
+	clk_put(sdev->dacphy);
+	clk_put(sdev->dac);
+	clk_put(sdev->sclk_dac);
+	free_irq(sdev->irq, sdev);
+	iounmap(sdev->regs);
+	kfree(sdev);
+
+	dev_info(&pdev->dev, "remove successful\n");
+	return 0;
+}
+
+static struct platform_driver sdo_driver __refdata = {
+	.probe = sdo_probe,
+	.remove = __devexit_p(sdo_remove),
+	.driver = {
+		.name = "s5p-sdo",
+		.owner = THIS_MODULE,
+		.pm = &sdo_pm_ops,
+	}
+};
+
+static int __init sdo_init(void)
+{
+	int ret;
+	static const char banner[] __initdata = KERN_INFO \
+		"Samsung Standard Definition Output (SDO) driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	ret = platform_driver_register(&sdo_driver);
+	if (ret)
+		printk(KERN_ERR "SDO platform driver register failed\n");
+
+	return ret;
+}
+module_init(sdo_init);
+
+static void __exit sdo_exit(void)
+{
+	platform_driver_unregister(&sdo_driver);
+}
+module_exit(sdo_exit);