提交 87739868 编写于 作者: S Simon Farnsworth 提交者: Mauro Carvalho Chehab

[media] saa7134: Add pm_qos_request to fix video corruption

The SAA7134 appears to have trouble buffering more than one line of video
when doing DMA. Rather than try to fix the driver to cope (as has been done
by Andy Walls for the cx18 driver), put in a pm_qos_request to limit deep
sleep exit latencies.
The visible effect of not having this is that seemingly random lines are
only partly transferred - if you feed in a static image, you see a portion
of the image "flicker" into place.

[mchehab@redhat.com: Fix ABI breakage due to some renames at pm_qos]
Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 e8d42373
......@@ -2248,6 +2248,17 @@ static int saa7134_streamon(struct file *file, void *priv,
if (!res_get(dev, fh, res))
return -EBUSY;
/* The SAA7134 has a 1K FIFO; the datasheet suggests that when
* configured conservatively, there's 22 usec of buffering for video.
* We therefore request a DMA latency of 20 usec, giving us 2 usec of
* margin in case the FIFO is configured differently to the datasheet.
* Unfortunately, I lack register-level documentation to check the
* Linux FIFO setup and confirm the perfect value.
*/
pm_qos_add_request(&fh->qos_request,
PM_QOS_CPU_DMA_LATENCY,
20);
return videobuf_streamon(saa7134_queue(fh));
}
......@@ -2259,6 +2270,8 @@ static int saa7134_streamoff(struct file *file, void *priv,
struct saa7134_dev *dev = fh->dev;
int res = saa7134_resource(fh);
pm_qos_remove_request(&fh->qos_request);
err = videobuf_streamoff(saa7134_queue(fh));
if (err < 0)
return err;
......
......@@ -29,6 +29,7 @@
#include <linux/notifier.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/pm_qos.h>
#include <asm/io.h>
......@@ -469,6 +470,7 @@ struct saa7134_fh {
enum v4l2_buf_type type;
unsigned int resources;
enum v4l2_priority prio;
struct pm_qos_request qos_request;
/* video overlay */
struct v4l2_window win;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册