提交 e8d42373 编写于 作者: O Oleh Kravchenko 提交者: Mauro Carvalho Chehab

[media] Added support for AVerTV Hybrid Express Slim HC81R

This patch provide only analog support.
The device is based on AF9013 demodulator, XC3028 tuner
and CX23885 chipset; subsystem id: 1461:d939
Signed-off-by: NOleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 30ad64b8
......@@ -577,6 +577,35 @@ struct cx23885_board cx23885_boards[] = {
.name = "Hauppauge WinTV-HVR4400",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_AVERMEDIA_HC81R] = {
.name = "AVerTV Hybrid Express Slim HC81R",
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61, /* 0xc2 >> 1 */
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_VIN2_CH1 |
CX25840_VIN5_CH2 |
CX25840_NONE0_CH3 |
CX25840_NONE1_CH3,
.amux = CX25840_AUDIO8,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_VIN8_CH1 |
CX25840_NONE_CH2 |
CX25840_VIN7_CH3 |
CX25840_SVIDEO_ON,
.amux = CX25840_AUDIO6,
}, {
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_VIN1_CH1 |
CX25840_NONE_CH2 |
CX25840_NONE0_CH3 |
CX25840_NONE1_CH3,
.amux = CX25840_AUDIO6,
} },
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
......@@ -808,6 +837,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x0070,
.subdevice = 0xc1f8,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
}, {
.subvendor = 0x1461,
.subdevice = 0xd939,
.card = CX23885_BOARD_AVERMEDIA_HC81R,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
......@@ -1032,6 +1065,10 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
altera_ci_tuner_reset(dev, port->nr);
break;
case CX23885_BOARD_AVERMEDIA_HC81R:
/* XC3028L Reset Command */
bitmask = 1 << 2;
break;
}
if (bitmask) {
......@@ -1331,6 +1368,32 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx23885_gpio_set(dev, GPIO_8);
mdelay(100);
break;
case CX23885_BOARD_AVERMEDIA_HC81R:
cx_clear(MC417_CTL, 1);
/* GPIO-0,1,2 setup direction as output */
cx_set(GP0_IO, 0x00070000);
mdelay(10);
/* AF9013 demod reset */
cx_set(GP0_IO, 0x00010001);
mdelay(10);
cx_clear(GP0_IO, 0x00010001);
mdelay(10);
cx_set(GP0_IO, 0x00010001);
mdelay(10);
/* demod tune? */
cx_clear(GP0_IO, 0x00030003);
mdelay(10);
cx_set(GP0_IO, 0x00020002);
mdelay(10);
cx_set(GP0_IO, 0x00010001);
mdelay(10);
cx_clear(GP0_IO, 0x00020002);
/* XC3028L tuner reset */
cx_set(GP0_IO, 0x00040004);
cx_clear(GP0_IO, 0x00040004);
cx_set(GP0_IO, 0x00040004);
mdelay(60);
break;
}
}
......@@ -1549,6 +1612,17 @@ void cx23885_card_setup(struct cx23885_dev *dev)
}
switch (dev->board) {
case CX23885_BOARD_AVERMEDIA_HC81R:
/* Defaults for VID B */
ts1->gen_ctrl_val = 0x4; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
/* Defaults for VID C */
/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
ts2->gen_ctrl_val = 0x10e;
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
......@@ -1675,6 +1749,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MPX885:
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_AVERMEDIA_HC81R:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
......
......@@ -509,7 +509,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
(dev->board == CX23885_BOARD_MYGICA_X8507)) {
(dev->board == CX23885_BOARD_MYGICA_X8507) ||
(dev->board == CX23885_BOARD_AVERMEDIA_HC81R)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
......@@ -1878,6 +1879,18 @@ int cx23885_video_register(struct cx23885_dev *dev)
};
v4l2_subdev_call(sd, tuner, s_config, &cfg);
}
if (dev->board == CX23885_BOARD_AVERMEDIA_HC81R) {
struct xc2028_ctrl ctrl = {
.fname = "xc3028L-v36.fw",
.max_len = 64
};
struct v4l2_priv_tun_config cfg = {
.tuner = dev->tuner_type,
.priv = &ctrl
};
v4l2_subdev_call(sd, tuner, s_config, &cfg);
}
}
}
......
......@@ -92,6 +92,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
#define CX23885_BOARD_PROF_8000 37
#define CX23885_BOARD_HAUPPAUGE_HVR4400 38
#define CX23885_BOARD_AVERMEDIA_HC81R 39
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册