staging: comedi: vmk80xx: remove common and unused boardinfo

Some of the information in the boardinfo is common for both boards
supported by this driver. Remove that information from the boardinfo
and just initialize the subdevice values directly.

Also, remove any information in the boardinfo that is not used in
the driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/vmk80xx.c

@@ -162,12 +162,7 @@ struct vmk80xx_board {
 	__u8 ai_chans;
 	__le16 ai_bits;
 	__u8 ao_chans;
-	__le16 ao_bits;
 	__u8 di_chans;
-	__le16 di_bits;
-	__u8 do_chans;
-	__le16 do_bits;
-	__u8 cnt_chans;
 	__le16 cnt_bits;
 	__u8 pwm_chans;
 	__le16 pwm_bits;
@@ -181,12 +176,7 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = {
 		.ai_chans	= 2,
 		.ai_bits	= 8,
 		.ao_chans	= 2,
-		.ao_bits	= 8,
 		.di_chans	= 6,
-		.di_bits	= 1,
-		.do_chans	= 8,
-		.do_bits	= 1,
-		.cnt_chans	= 2,
 		.cnt_bits	= 16,
 		.pwm_chans	= 0,
 		.pwm_bits	= 0,
@@ -198,12 +188,7 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = {
 		.ai_chans	= 8,
 		.ai_bits	= 10,
 		.ao_chans	= 8,
-		.ao_bits	= 8,
 		.di_chans	= 8,
-		.di_bits	= 1,
-		.do_chans	= 8,
-		.do_bits	= 1,
-		.cnt_chans	= 2,
 		.cnt_bits	= 0,
 		.pwm_chans	= 1,
 		.pwm_bits	= 10,
@@ -1187,7 +1172,7 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
 	s->type = COMEDI_SUBD_AO;
 	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
 	s->n_chan = boardinfo->ao_chans;
-	s->maxdata = (1 << boardinfo->ao_bits) - 1;
+	s->maxdata = 0x00ff;
 	s->range_table = boardinfo->range;
 	s->insn_write = vmk80xx_ao_winsn;
 	if (boardinfo->model == VMK8061_MODEL) {
@@ -1208,7 +1193,7 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
 	s = &cdev->subdevices[VMK80XX_SUBD_DO];
 	s->type = COMEDI_SUBD_DO;
 	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
-	s->n_chan = boardinfo->do_chans;
+	s->n_chan = 8;
 	s->maxdata = 1;
 	s->insn_write = vmk80xx_do_winsn;
 	s->insn_bits = vmk80xx_do_bits;
@@ -1221,7 +1206,7 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
 	s = &cdev->subdevices[VMK80XX_SUBD_CNT];
 	s->type = COMEDI_SUBD_COUNTER;
 	s->subdev_flags = SDF_READABLE;
-	s->n_chan = boardinfo->cnt_chans;
+	s->n_chan = 2;
 	s->insn_read = vmk80xx_cnt_rinsn;
 	s->insn_config = vmk80xx_cnt_cinsn;
 	if (boardinfo->model == VMK8055_MODEL) {