ath9k: cleanup MCI indentation

Fix bad indentation & if nesting to lose about two levels
of unnecessary indentation.
Signed-off-by: NRajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_mci.c

@@ -35,31 +35,30 @@ static int ar9003_mci_wait_for_interrupt(struct ath_hw *ah, u32 address,
 	struct ath_common *common = ath9k_hw_common(ah);
 
 	while (time_out) {
-		if (REG_READ(ah, address) & bit_position) {
-			REG_WRITE(ah, address, bit_position);
-
-			if (address == AR_MCI_INTERRUPT_RX_MSG_RAW) {
-				if (bit_position &
-				    AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
-					ar9003_mci_reset_req_wakeup(ah);
-
-				if (bit_position &
-				    (AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING |
-				     AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING))
-					REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
-					AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
-
-				REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
-					  AR_MCI_INTERRUPT_RX_MSG);
-			}
-			break;
-		}
+		if (!(REG_READ(ah, address) & bit_position)) {
+			udelay(10);
+			time_out -= 10;
 
-		udelay(10);
-		time_out -= 10;
+			if (time_out < 0)
+				break;
+			else
+				continue;
+		}
+		REG_WRITE(ah, address, bit_position);
 
-		if (time_out < 0)
+		if (address != AR_MCI_INTERRUPT_RX_MSG_RAW)
 			break;
+
+		if (bit_position & AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
+			ar9003_mci_reset_req_wakeup(ah);
+
+		if (bit_position & (AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING |
+				    AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING))
+			REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+				  AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
+
+		REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, AR_MCI_INTERRUPT_RX_MSG);
+		break;
 	}
 
 	if (time_out <= 0) {
@@ -127,14 +126,13 @@ static void ar9003_mci_send_coex_version_query(struct ath_hw *ah,
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	u32 payload[4] = {0, 0, 0, 0};
 
-	if (!mci->bt_version_known &&
-	    (mci->bt_state != MCI_BT_SLEEP)) {
-		MCI_GPM_SET_TYPE_OPCODE(payload,
-					MCI_GPM_COEX_AGENT,
-					MCI_GPM_COEX_VERSION_QUERY);
-		ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
-					wait_done, true);
-	}
+	if (mci->bt_version_known ||
+	    (mci->bt_state == MCI_BT_SLEEP))
+		return;
+
+	MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
+				MCI_GPM_COEX_VERSION_QUERY);
+	ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
 }
 
 static void ar9003_mci_send_coex_version_response(struct ath_hw *ah,
@@ -158,15 +156,14 @@ static void ar9003_mci_send_coex_wlan_channels(struct ath_hw *ah,
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	u32 *payload = &mci->wlan_channels[0];
 
-	if ((mci->wlan_channels_update == true) &&
-	    (mci->bt_state != MCI_BT_SLEEP)) {
-		MCI_GPM_SET_TYPE_OPCODE(payload,
-					MCI_GPM_COEX_AGENT,
-					MCI_GPM_COEX_WLAN_CHANNELS);
-		ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
-					wait_done, true);
-		MCI_GPM_SET_TYPE_OPCODE(payload, 0xff, 0xff);
-	}
+	if (!mci->wlan_channels_update ||
+	    (mci->bt_state == MCI_BT_SLEEP))
+		return;
+
+	MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
+				MCI_GPM_COEX_WLAN_CHANNELS);
+	ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
+	MCI_GPM_SET_TYPE_OPCODE(payload, 0xff, 0xff);
 }
 
 static void ar9003_mci_send_coex_bt_status_query(struct ath_hw *ah,
@@ -174,29 +171,30 @@ static void ar9003_mci_send_coex_bt_status_query(struct ath_hw *ah,
 {
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	u32 payload[4] = {0, 0, 0, 0};
-	bool query_btinfo = !!(query_type & (MCI_GPM_COEX_QUERY_BT_ALL_INFO |
-					     MCI_GPM_COEX_QUERY_BT_TOPOLOGY));
+	bool query_btinfo;
 
-	if (mci->bt_state != MCI_BT_SLEEP) {
-
-		MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
-					MCI_GPM_COEX_STATUS_QUERY);
+	if (mci->bt_state == MCI_BT_SLEEP)
+		return;
 
-		*(((u8 *)payload) + MCI_GPM_COEX_B_BT_BITMAP) = query_type;
+	query_btinfo = !!(query_type & (MCI_GPM_COEX_QUERY_BT_ALL_INFO |
+					MCI_GPM_COEX_QUERY_BT_TOPOLOGY));
+	MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
+				MCI_GPM_COEX_STATUS_QUERY);
 
-		/*
-		 * If bt_status_query message is  not sent successfully,
-		 * then need_flush_btinfo should be set again.
-		 */
-		if (!ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
-					     wait_done, true)) {
-			if (query_btinfo)
-				mci->need_flush_btinfo = true;
-		}
+	*(((u8 *)payload) + MCI_GPM_COEX_B_BT_BITMAP) = query_type;
 
+	/*
+	 * If bt_status_query message is  not sent successfully,
+	 * then need_flush_btinfo should be set again.
+	 */
+	if (!ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+				wait_done, true)) {
 		if (query_btinfo)
-			mci->query_bt = false;
+			mci->need_flush_btinfo = true;
 	}
+
+	if (query_btinfo)
+		mci->query_bt = false;
 }
 
 static void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
@@ -241,73 +239,73 @@ static void ar9003_mci_prep_interface(struct ath_hw *ah)
 	ar9003_mci_remote_reset(ah, true);
 	ar9003_mci_send_req_wake(ah, true);
 
-	if (ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
-				  AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING, 500)) {
+	if (!ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+				  AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING, 500))
+		goto clear_redunt;
 
-		mci->bt_state = MCI_BT_AWAKE;
+	mci->bt_state = MCI_BT_AWAKE;
 
-		/*
-		 * we don't need to send more remote_reset at this moment.
-		 * If BT receive first remote_reset, then BT HW will
-		 * be cleaned up and will be able to receive req_wake
-		 * and BT HW will respond sys_waking.
-		 * In this case, WLAN will receive BT's HW sys_waking.
-		 * Otherwise, if BT SW missed initial remote_reset,
-		 * that remote_reset will still clean up BT MCI RX,
-		 * and the req_wake will wake BT up,
-		 * and BT SW will respond this req_wake with a remote_reset and
-		 * sys_waking. In this case, WLAN will receive BT's SW
-		 * sys_waking. In either case, BT's RX is cleaned up. So we
-		 * don't need to reply BT's remote_reset now, if any.
-		 * Similarly, if in any case, WLAN can receive BT's sys_waking,
-		 * that means WLAN's RX is also fine.
-		 */
-		ar9003_mci_send_sys_waking(ah, true);
-		udelay(10);
+	/*
+	 * we don't need to send more remote_reset at this moment.
+	 * If BT receive first remote_reset, then BT HW will
+	 * be cleaned up and will be able to receive req_wake
+	 * and BT HW will respond sys_waking.
+	 * In this case, WLAN will receive BT's HW sys_waking.
+	 * Otherwise, if BT SW missed initial remote_reset,
+	 * that remote_reset will still clean up BT MCI RX,
+	 * and the req_wake will wake BT up,
+	 * and BT SW will respond this req_wake with a remote_reset and
+	 * sys_waking. In this case, WLAN will receive BT's SW
+	 * sys_waking. In either case, BT's RX is cleaned up. So we
+	 * don't need to reply BT's remote_reset now, if any.
+	 * Similarly, if in any case, WLAN can receive BT's sys_waking,
+	 * that means WLAN's RX is also fine.
+	 */
+	ar9003_mci_send_sys_waking(ah, true);
+	udelay(10);
 
-		/*
-		 * Set BT priority interrupt value to be 0xff to
-		 * avoid having too many BT PRIORITY interrupts.
-		 */
-		REG_WRITE(ah, AR_MCI_BT_PRI0, 0xFFFFFFFF);
-		REG_WRITE(ah, AR_MCI_BT_PRI1, 0xFFFFFFFF);
-		REG_WRITE(ah, AR_MCI_BT_PRI2, 0xFFFFFFFF);
-		REG_WRITE(ah, AR_MCI_BT_PRI3, 0xFFFFFFFF);
-		REG_WRITE(ah, AR_MCI_BT_PRI, 0X000000FF);
+	/*
+	 * Set BT priority interrupt value to be 0xff to
+	 * avoid having too many BT PRIORITY interrupts.
+	 */
+	REG_WRITE(ah, AR_MCI_BT_PRI0, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_MCI_BT_PRI1, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_MCI_BT_PRI2, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_MCI_BT_PRI3, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_MCI_BT_PRI, 0X000000FF);
 
-		/*
-		 * A contention reset will be received after send out
-		 * sys_waking. Also BT priority interrupt bits will be set.
-		 * Clear those bits before the next step.
-		 */
+	/*
+	 * A contention reset will be received after send out
+	 * sys_waking. Also BT priority interrupt bits will be set.
+	 * Clear those bits before the next step.
+	 */
 
-		REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
-			  AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
-		REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
-			  AR_MCI_INTERRUPT_BT_PRI);
+	REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+		  AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
+	REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, AR_MCI_INTERRUPT_BT_PRI);
 
-		if (mci->is_2g) {
-			ar9003_mci_send_lna_transfer(ah, true);
-			udelay(5);
-		}
+	if (mci->is_2g) {
+		ar9003_mci_send_lna_transfer(ah, true);
+		udelay(5);
+	}
 
-		if ((mci->is_2g && !mci->update_2g5g)) {
-			if (ar9003_mci_wait_for_interrupt(ah,
-					  AR_MCI_INTERRUPT_RX_MSG_RAW,
-					  AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
-					  mci_timeout))
-				ath_dbg(common, MCI,
-					"MCI WLAN has control over the LNA & BT obeys it\n");
-			else
-				ath_dbg(common, MCI,
-					"MCI BT didn't respond to LNA_TRANS\n");
-		}
+	if ((mci->is_2g && !mci->update_2g5g)) {
+		if (ar9003_mci_wait_for_interrupt(ah,
+					AR_MCI_INTERRUPT_RX_MSG_RAW,
+					AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
+					mci_timeout))
+			ath_dbg(common, MCI,
+				"MCI WLAN has control over the LNA & BT obeys it\n");
+		else
+			ath_dbg(common, MCI,
+				"MCI BT didn't respond to LNA_TRANS\n");
 	}
 
+clear_redunt:
 	/* Clear the extra redundant SYS_WAKING from BT */
 	if ((mci->bt_state == MCI_BT_AWAKE) &&
-		(REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
-				AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING)) &&
+	    (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+			    AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING)) &&
 	    (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
 			    AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) == 0)) {
 		REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
@@ -614,9 +612,9 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
 				}
 				break;
 			}
-		} else if ((recv_type == gpm_type) && (recv_opcode == gpm_opcode)) {
+		} else if ((recv_type == gpm_type) &&
+			   (recv_opcode == gpm_opcode))
 			break;
-		}
 
 		/*
 		 * check if it's cal_grant
@@ -730,38 +728,38 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (!IS_CHAN_2GHZ(chan) || (mci_hw->bt_state != MCI_BT_SLEEP))
 		goto exit;
 
-	if (ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
-	    ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
+	if (!ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) &&
+	    !ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE))
+		goto exit;
 
-		/*
-		 * BT is sleeping. Check if BT wakes up during
-		 * WLAN calibration. If BT wakes up during
-		 * WLAN calibration, need to go through all
-		 * message exchanges again and recal.
-		 */
-		REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
-			  AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
-			  AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
+	/*
+	 * BT is sleeping. Check if BT wakes up during
+	 * WLAN calibration. If BT wakes up during
+	 * WLAN calibration, need to go through all
+	 * message exchanges again and recal.
+	 */
+	REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+		  (AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
+		   AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE));
 
-		ar9003_mci_remote_reset(ah, true);
-		ar9003_mci_send_sys_waking(ah, true);
-		udelay(1);
+	ar9003_mci_remote_reset(ah, true);
+	ar9003_mci_send_sys_waking(ah, true);
+	udelay(1);
 
-		if (IS_CHAN_2GHZ(chan))
-			ar9003_mci_send_lna_transfer(ah, true);
+	if (IS_CHAN_2GHZ(chan))
+		ar9003_mci_send_lna_transfer(ah, true);
 
-		mci_hw->bt_state = MCI_BT_AWAKE;
+	mci_hw->bt_state = MCI_BT_AWAKE;
 
-		if (caldata) {
-			caldata->done_txiqcal_once = false;
-			caldata->done_txclcal_once = false;
-			caldata->rtt_done = false;
-		}
+	if (caldata) {
+		caldata->done_txiqcal_once = false;
+		caldata->done_txclcal_once = false;
+		caldata->rtt_done = false;
+	}
 
-		if (!ath9k_hw_init_cal(ah, chan))
-			return -EIO;
+	if (!ath9k_hw_init_cal(ah, chan))
+		return -EIO;
 
-	}
 exit:
 	ar9003_mci_enable_interrupt(ah);
 	return 0;
@@ -797,29 +795,27 @@ static void ar9003_mci_osla_setup(struct ath_hw *ah, bool enable)
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	u32 thresh;
 
-	if (enable) {
-		REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
-			      AR_MCI_SCHD_TABLE_2_HW_BASED, 1);
-		REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
-			      AR_MCI_SCHD_TABLE_2_MEM_BASED, 1);
-
-		if (!(mci->config & ATH_MCI_CONFIG_DISABLE_AGGR_THRESH)) {
-			thresh = MS(mci->config, ATH_MCI_CONFIG_AGGR_THRESH);
-			REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
-				      AR_BTCOEX_CTRL_AGGR_THRESH, thresh);
-			REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
-				      AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 1);
-		} else {
-			REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
-				      AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 0);
-		}
-
-		REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
-			      AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1);
-	} else {
+	if (!enable) {
 		REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
 			    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+		return;
 	}
+	REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2, AR_MCI_SCHD_TABLE_2_HW_BASED, 1);
+	REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
+		      AR_MCI_SCHD_TABLE_2_MEM_BASED, 1);
+
+	if (!(mci->config & ATH_MCI_CONFIG_DISABLE_AGGR_THRESH)) {
+		thresh = MS(mci->config, ATH_MCI_CONFIG_AGGR_THRESH);
+		REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
+			      AR_BTCOEX_CTRL_AGGR_THRESH, thresh);
+		REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
+			      AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 1);
+	} else
+		REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
+			      AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 0);
+
+	REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
+		      AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1);
 }
 
 void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
@@ -942,26 +938,27 @@ static void ar9003_mci_send_2g5g_status(struct ath_hw *ah, bool wait_done)
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	u32 new_flags, to_set, to_clear;
 
-	if (mci->update_2g5g && (mci->bt_state != MCI_BT_SLEEP)) {
-		if (mci->is_2g) {
-			new_flags = MCI_2G_FLAGS;
-			to_clear = MCI_2G_FLAGS_CLEAR_MASK;
-			to_set = MCI_2G_FLAGS_SET_MASK;
-		} else {
-			new_flags = MCI_5G_FLAGS;
-			to_clear = MCI_5G_FLAGS_CLEAR_MASK;
-			to_set = MCI_5G_FLAGS_SET_MASK;
-		}
+	if (!mci->update_2g5g || (mci->bt_state == MCI_BT_SLEEP))
+		return;
 
-		if (to_clear)
-			ar9003_mci_send_coex_bt_flags(ah, wait_done,
+	if (mci->is_2g) {
+		new_flags = MCI_2G_FLAGS;
+		to_clear = MCI_2G_FLAGS_CLEAR_MASK;
+		to_set = MCI_2G_FLAGS_SET_MASK;
+	} else {
+		new_flags = MCI_5G_FLAGS;
+		to_clear = MCI_5G_FLAGS_CLEAR_MASK;
+		to_set = MCI_5G_FLAGS_SET_MASK;
+	}
+
+	if (to_clear)
+		ar9003_mci_send_coex_bt_flags(ah, wait_done,
 					      MCI_GPM_COEX_BT_FLAGS_CLEAR,
 					      to_clear);
-		if (to_set)
-			ar9003_mci_send_coex_bt_flags(ah, wait_done,
+	if (to_set)
+		ar9003_mci_send_coex_bt_flags(ah, wait_done,
 					      MCI_GPM_COEX_BT_FLAGS_SET,
 					      to_set);
-	}
 }
 
 static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
@@ -1017,34 +1014,34 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
 {
 	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 
-	if (mci->update_2g5g) {
-		if (mci->is_2g) {
-			ar9003_mci_send_2g5g_status(ah, true);
-			ar9003_mci_send_lna_transfer(ah, true);
-			udelay(5);
+	if (!mci->update_2g5g)
+		return;
 
-			REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
-				    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
-			REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
-				    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+	if (mci->is_2g) {
+		ar9003_mci_send_2g5g_status(ah, true);
+		ar9003_mci_send_lna_transfer(ah, true);
+		udelay(5);
 
-			if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) {
-				REG_SET_BIT(ah, AR_BTCOEX_CTRL,
-					    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
-			}
-		} else {
-			ar9003_mci_send_lna_take(ah, true);
-			udelay(5);
-
-			REG_SET_BIT(ah, AR_MCI_TX_CTRL,
-				    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
-			REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
-				    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
-			REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
+		REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+		REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
+			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+
+		if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
+			REG_SET_BIT(ah, AR_BTCOEX_CTRL,
 				    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+	} else {
+		ar9003_mci_send_lna_take(ah, true);
+		udelay(5);
 
-			ar9003_mci_send_2g5g_status(ah, true);
-		}
+		REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+		REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+		REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
+			    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+		ar9003_mci_send_2g5g_status(ah, true);
 	}
 }
 
@@ -1258,12 +1255,12 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
 			}
 			if (p_data)
 				*p_data = more_gpm;
-			}
+		}
 
-			if (value != MCI_GPM_INVALID)
-				value <<= 4;
+		if (value != MCI_GPM_INVALID)
+			value <<= 4;
 
-			break;
+		break;
 	case MCI_STATE_LAST_SCHD_MSG_OFFSET:
 		value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
 				    AR_MCI_RX_LAST_SCHD_MSG_INDEX);
@@ -1358,24 +1355,22 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
 		ar9003_mci_send_coex_bt_status_query(ah, true, query_type);
 		break;
 	case MCI_STATE_NEED_FLUSH_BT_INFO:
-			/*
-			 * btcoex_hw.mci.unhalt_bt_gpm means whether it's
-			 * needed to send UNHALT message. It's set whenever
-			 * there's a request to send HALT message.
-			 * mci_halted_bt_gpm means whether HALT message is sent
-			 * out successfully.
-			 *
-			 * Checking (mci_unhalt_bt_gpm == false) instead of
-			 * checking (ah->mci_halted_bt_gpm == false) will make
-			 * sure currently is in UNHALT-ed mode and BT can
-			 * respond to status query.
-			 */
-			value = (!mci->unhalt_bt_gpm &&
-				 mci->need_flush_btinfo) ? 1 : 0;
-			if (p_data)
-				mci->need_flush_btinfo =
-					(*p_data != 0) ? true : false;
-			break;
+		/*
+		 * btcoex_hw.mci.unhalt_bt_gpm means whether it's
+		 * needed to send UNHALT message. It's set whenever
+		 * there's a request to send HALT message.
+		 * mci_halted_bt_gpm means whether HALT message is sent
+		 * out successfully.
+		 *
+		 * Checking (mci_unhalt_bt_gpm == false) instead of
+		 * checking (ah->mci_halted_bt_gpm == false) will make
+		 * sure currently is in UNHALT-ed mode and BT can
+		 * respond to status query.
+		 */
+		value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
+		if (p_data)
+			mci->need_flush_btinfo = (*p_data != 0) ? true : false;
+		break;
 	case MCI_STATE_RECOVER_RX:
 		ar9003_mci_prep_interface(ah);
 		mci->query_bt = true;