Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 2de05a57 编写于 作者: K Kukjin Kim
浏览文件
操作

Merge branch 'next/devel-exynos5250-1' into next/devel-samsung-2

上级 ab5a4e63 380c3a54
隐藏空白更改
内联 并排
Showing with 567 addition and 368 deletion
Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt 0 → 100644
浏览文件 @ 2de05a57
* Samsung Exynos Interrupt Combiner Controller
Samsung's Exynos4 architecture includes a interrupt combiner controller which
can combine interrupt sources as a group and provide a single interrupt request
for the group. The interrupt request from each group are connected to a parent
interrupt controller, such as GIC in case of Exynos4210.
The interrupt combiner controller consists of multiple combiners. Upto eight
interrupt sources can be connected to a combiner. The combiner outputs one
combined interrupt for its eight interrupt sources. The combined interrupt
is usually connected to a parent interrupt controller.
A single node in the device tree is used to describe the interrupt combiner
controller module (which includes multiple combiners). A combiner in the
interrupt controller module shares config/control registers with other
combiners. For example, a 32-bit interrupt enable/disable config register
can accommodate upto 4 interrupt combiners (with each combiner supporting
upto 8 interrupt sources).
Required properties:
- compatible: should be "samsung,exynos4210-combiner".
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: should be <2>. The meaning of the cells are
* First Cell: Combiner Group Number.
* Second Cell: Interrupt number within the group.
- reg: Base address and size of interrupt combiner registers.
- interrupts: The list of interrupts generated by the combiners which are then
connected to a parent interrupt controller. The format of the interrupt
specifier depends in the interrupt parent controller.
Optional properties:
- samsung,combiner-nr: The number of interrupt combiners supported. If this
property is not specified, the default number of combiners is assumed
to be 16.
- interrupt-parent: pHandle of the parent interrupt controller, if not
inherited from the parent node.
Example:
The following is a an example from the Exynos4210 SoC dtsi file.
combiner:interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
arch/arm/Kconfig
浏览文件 @ 2de05a57
......@@ -1088,7 +1088,6 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
......
arch/arm/Makefile
浏览文件 @ 2de05a57
......@@ -209,7 +209,7 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
plat-$(CONFIG_PLAT_S5P) := samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
......
arch/arm/boot/dts/exynos5250-smdk5250.dts
浏览文件 @ 2de05a57
......@@ -23,4 +23,52 @@
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
};
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
reg = <0x51>;
};
};
i2c@12C80000 {
status = "disabled";
};
i2c@12C90000 {
status = "disabled";
};
i2c@12CA0000 {
status = "disabled";
};
i2c@12CB0000 {
status = "disabled";
};
i2c@12CC0000 {
status = "disabled";
};
i2c@12CD0000 {
status = "disabled";
};
};
arch/arm/boot/dts/exynos5250.dtsi
浏览文件 @ 2de05a57
......@@ -23,11 +23,11 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
gic:interrupt-controller@10490000 {
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
};
watchdog {
......@@ -42,30 +42,6 @@
interrupts = <0 43 0>, <0 44 0>;
};
sdhci@12200000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12200000 0x100>;
interrupts = <0 75 0>;
};
sdhci@12210000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12210000 0x100>;
interrupts = <0 76 0>;
};
sdhci@12220000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12220000 0x100>;
interrupts = <0 77 0>;
};
sdhci@12230000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12230000 0x100>;
interrupts = <0 78 0>;
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
......@@ -94,48 +70,64 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
};
amba {
......@@ -157,13 +149,13 @@
interrupts = <0 35 0>;
};
mdma0: pdma@10800000 {
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
};
mdma1: pdma@11C10000 {
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
......@@ -242,6 +234,12 @@
#gpio-cells = <4>;
};
gpc4: gpio-controller@114002E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114002E0 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
......@@ -388,19 +386,19 @@
gpv2: gpio-controller@10D10040 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10040 0x20>;
reg = <0x10D10060 0x20>;
#gpio-cells = <4>;
};
gpv3: gpio-controller@10D10060 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10060 0x20>;
reg = <0x10D10080 0x20>;
#gpio-cells = <4>;
};
gpv4: gpio-controller@10D10080 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10080 0x20>;
reg = <0x10D100C0 0x20>;
#gpio-cells = <4>;
};
......
arch/arm/mach-exynos/clock-exynos5.c
浏览文件 @ 2de05a57
......@@ -165,11 +165,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
};
static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
.clk = {
.name = "mout_bpll_fout",
},
.sources = &clk_src_bpll_fout,
.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
};
static struct clk *exynos5_clk_src_bpll_list[] = {
[0] = &clk_fin_bpll,
[1] = &exynos5_clk_mout_bpll_fout.clk,
};
static struct clksrc_sources exynos5_clk_src_bpll = {
.sources = exynos5_clk_src_bpll_list,
.nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
};
static struct clksrc_clk exynos5_clk_mout_bpll = {
.clk = {
.name = "mout_bpll",
},
.sources = &clk_src_bpll,
.sources = &exynos5_clk_src_bpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
};
......@@ -207,11 +225,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
};
static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
.clk = {
.name = "mout_mpll_fout",
},
.sources = &clk_src_mpll_fout,
.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
};
static struct clk *exynos5_clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
[1] = &exynos5_clk_mout_mpll_fout.clk,
};
static struct clksrc_sources exynos5_clk_src_mpll = {
.sources = exynos5_clk_src_mpll_list,
.nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
};
struct clksrc_clk exynos5_clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
.sources = &exynos5_clk_src_mpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
};
......@@ -473,6 +509,11 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 20),
}, {
.name = "watchdog",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 19),
}, {
.name = "hsmmc",
.devname = "exynos4-sdhci.0",
......@@ -1031,10 +1072,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_mout_apll,
&exynos5_clk_sclk_apll,
&exynos5_clk_mout_bpll,
&exynos5_clk_mout_bpll_fout,
&exynos5_clk_mout_bpll_user,
&exynos5_clk_mout_cpll,
&exynos5_clk_mout_epll,
&exynos5_clk_mout_mpll,
&exynos5_clk_mout_mpll_fout,
&exynos5_clk_mout_mpll_user,
&exynos5_clk_vpllsrc,
&exynos5_clk_sclk_vpll,
......@@ -1098,7 +1141,9 @@ static struct clk *exynos5_clks[] __initdata = {
&exynos5_clk_sclk_hdmi27m,
&exynos5_clk_sclk_hdmiphy,
&clk_fout_bpll,
&clk_fout_bpll_div2,
&clk_fout_cpll,
&clk_fout_mpll_div2,
&exynos5_clk_armclk,
};
......@@ -1263,8 +1308,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
clk_fout_apll.ops = &exynos5_fout_apll_ops;
clk_fout_bpll.rate = bpll;
clk_fout_bpll_div2.rate = bpll >> 1;
clk_fout_cpll.rate = cpll;
clk_fout_mpll.rate = mpll;
clk_fout_mpll_div2.rate = mpll >> 1;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;
......
arch/arm/mach-exynos/common.c
浏览文件 @ 2de05a57
......@@ -19,6 +19,9 @@
#include <linux/serial_core.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
......@@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
}, {
.virtual = (unsigned long)S5P_VA_GIC_CPU,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
.length = SZ_64K,
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GIC_DIST,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
.length = SZ_64K,
.length = SZ_4K,
.type = MT_DEVICE,
},
};
......@@ -399,6 +402,7 @@ struct combiner_chip_data {
void __iomem *base;
};
static struct irq_domain *combiner_irq_domain;
static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
static inline void __iomem *combiner_base(struct irq_data *data)
......@@ -411,14 +415,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
static void combiner_mask_irq(struct irq_data *data)
{
u32 mask = 1 << (data->irq % 32);
u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
}
static void combiner_unmask_irq(struct irq_data *data)
{
u32 mask = 1 << (data->irq % 32);
u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
}
......@@ -474,49 +478,127 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
irq_set_chained_handler(irq, combiner_handle_cascade_irq);
}
static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start)
static void __init combiner_init_one(unsigned int combiner_nr,
void __iomem *base)
{
unsigned int i;
unsigned int max_nr;
if (soc_is_exynos5250())
max_nr = EXYNOS5_MAX_COMBINER_NR;
else
max_nr = EXYNOS4_MAX_COMBINER_NR;
if (combiner_nr >= max_nr)
BUG();
combiner_data[combiner_nr].base = base;
combiner_data[combiner_nr].irq_offset = irq_start;
combiner_data[combiner_nr].irq_offset = irq_find_mapping(
combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
/* Disable all interrupts */
__raw_writel(combiner_data[combiner_nr].irq_mask,
base + COMBINER_ENABLE_CLEAR);
}
/* Setup the Linux IRQ subsystem */
#ifdef CONFIG_OF
static int combiner_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (d->of_node != controller)
return -EINVAL;
if (intsize < 2)
return -EINVAL;
for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ MAX_IRQ_IN_COMBINER; i++) {
irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
irq_set_chip_data(i, &combiner_data[combiner_nr]);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
*out_type = 0;
return 0;
}
#else
static int combiner_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
return -EINVAL;
}
#endif
static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
irq_set_chip_data(irq, &combiner_data[hw >> 3]);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
return 0;
}
static struct irq_domain_ops combiner_irq_domain_ops = {
.xlate = combiner_irq_domain_xlate,
.map = combiner_irq_domain_map,
};
void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
{
int i, irq, irq_base;
unsigned int max_nr, nr_irq;
if (np) {
if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
pr_warning("%s: number of combiners not specified, "
"setting default as %d.\n",
__func__, EXYNOS4_MAX_COMBINER_NR);
max_nr = EXYNOS4_MAX_COMBINER_NR;
}
} else {
max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
EXYNOS4_MAX_COMBINER_NR;
}
nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
if (IS_ERR_VALUE(irq_base)) {
irq_base = COMBINER_IRQ(0, 0);
pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
}
combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
&combiner_irq_domain_ops, &combiner_data);
if (WARN_ON(!combiner_irq_domain)) {
pr_warning("%s: irq domain init failed\n", __func__);
return;
}
for (i = 0; i < max_nr; i++) {
combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
irq = np ? irq_of_parse_and_map(np, i) : IRQ_SPI(i);
combiner_cascade_irq(i, irq);
}
}
#ifdef CONFIG_OF
int __init combiner_of_init(struct device_node *np, struct device_node *parent)
{
void __iomem *combiner_base;
combiner_base = of_iomap(np, 0);
if (!combiner_base) {
pr_err("%s: failed to map combiner registers\n", __func__);
return -ENXIO;
}
combiner_init(combiner_base, np);
return 0;
}
static const struct of_device_id exynos4_dt_irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{ .compatible = "samsung,exynos4210-combiner",
.data = combiner_of_init, },
{},
};
#endif
void __init exynos4_init_irq(void)
{
int irq;
unsigned int gic_bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
......@@ -528,12 +610,8 @@ void __init exynos4_init_irq(void)
of_irq_init(exynos4_dt_irq_match);
#endif
for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
}
if (!of_have_populated_dt())
combiner_init(S5P_VA_COMBINER_BASE, NULL);
/*
* The parameters of s5p_init_irq() are for VIC init.
......@@ -545,18 +623,9 @@ void __init exynos4_init_irq(void)
void __init exynos5_init_irq(void)
{
int irq;
#ifdef CONFIG_OF
of_irq_init(exynos4_dt_irq_match);
#endif
for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
}
/*
* The parameters of s5p_init_irq() are for VIC init.
* Theses parameters should be NULL and 0 because EXYNOS4
......@@ -565,30 +634,18 @@ void __init exynos5_init_irq(void)
s5p_init_irq(NULL, 0);
}
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
struct bus_type exynos5_subsys = {
.name = "exynos5-core",
.dev_name = "exynos5-core",
struct bus_type exynos_subsys = {
.name = "exynos-core",
.dev_name = "exynos-core",
};
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
static struct device exynos5_dev = {
.bus = &exynos5_subsys,
.bus = &exynos_subsys,
};
static int __init exynos_core_init(void)
{
if (soc_is_exynos5250())
return subsys_system_register(&exynos5_subsys, NULL);
else
return subsys_system_register(&exynos4_subsys, NULL);
return subsys_system_register(&exynos_subsys, NULL);
}
core_initcall(exynos_core_init);
......@@ -675,10 +732,7 @@ static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
if (soc_is_exynos5250())
return device_register(&exynos5_dev);
else
return device_register(&exynos4_dev);
return device_register(&exynos4_dev);
}
/* uart registration process */
......
arch/arm/mach-exynos/include/mach/gpio.h
浏览文件 @ 2de05a57
......@@ -153,10 +153,11 @@ enum exynos4_gpio_number {
#define EXYNOS5_GPIO_B2_NR (4)
#define EXYNOS5_GPIO_B3_NR (4)
#define EXYNOS5_GPIO_C0_NR (7)
#define EXYNOS5_GPIO_C1_NR (7)
#define EXYNOS5_GPIO_C1_NR (4)
#define EXYNOS5_GPIO_C2_NR (7)
#define EXYNOS5_GPIO_C3_NR (7)
#define EXYNOS5_GPIO_D0_NR (8)
#define EXYNOS5_GPIO_C4_NR (7)
#define EXYNOS5_GPIO_D0_NR (4)
#define EXYNOS5_GPIO_D1_NR (8)
#define EXYNOS5_GPIO_Y0_NR (6)
#define EXYNOS5_GPIO_Y1_NR (4)
......@@ -199,7 +200,8 @@ enum exynos5_gpio_number {
EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
......@@ -242,6 +244,7 @@ enum exynos5_gpio_number {
#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr))
#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr))
#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr))
#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr))
#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr))
#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr))
#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr))
......
arch/arm/mach-exynos/include/mach/irqs.h
浏览文件 @ 2de05a57
......@@ -286,6 +286,7 @@
#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83)
#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
......@@ -294,8 +295,8 @@
#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
#define EXYNOS5_IRQ_2D IRQ_SPI(91)
#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92)
#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93)
#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
......@@ -309,7 +310,7 @@
#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107)
#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
......@@ -318,8 +319,9 @@
#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
......@@ -327,7 +329,6 @@
#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
......@@ -338,6 +339,8 @@
#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
......@@ -361,8 +364,8 @@
#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3)
#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
......@@ -374,11 +377,9 @@
#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6)
#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
......@@ -394,17 +395,24 @@
#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1)
#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3)
#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0)
#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1)
#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3)
#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
......@@ -435,7 +443,7 @@
#define EXYNOS5_MAX_COMBINER_NR 32
#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14
#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
......
arch/arm/mach-exynos/include/mach/map.h
浏览文件 @ 2de05a57
......@@ -81,8 +81,8 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
#define EXYNOS5_PA_GIC_CPU 0x10480000
#define EXYNOS5_PA_GIC_DIST 0x10490000
#define EXYNOS5_PA_GIC_CPU 0x10482000
#define EXYNOS5_PA_GIC_DIST 0x10481000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
......
arch/arm/mach-exynos/include/mach/regs-clock.h
浏览文件 @ 2de05a57
......@@ -322,6 +322,8 @@
#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
#define EXYNOS5_PLL_DIV2_SEL EXYNOS_CLKREG(0x20A24)
#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
......
arch/arm/mach-exynos/mach-exynos5-dt.c
浏览文件 @ 2de05a57
......@@ -43,6 +43,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"exynos4210-uart.2", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
"exynos4210-uart.3", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
......
arch/arm/mach-exynos/mct.c
浏览文件 @ 2de05a57
......@@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
......@@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
evt->irq = EXYNOS4_IRQ_MCT_L0;
setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick0_event_irq);
} else {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
evt->irq = EXYNOS4_IRQ_MCT_L1;
setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick1_event_irq);
irq_set_affinity(mct_lx_irq, cpumask_of(1));
}
} else {
enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
......@@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
static void __init exynos4_timer_init(void)
{
if (soc_is_exynos4210())
if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
mct_int_type = MCT_INT_SPI;
else
mct_int_type = MCT_INT_PPI;
......
arch/arm/mach-exynos/pm.c
浏览文件 @ 2de05a57
......@@ -275,7 +275,7 @@ static void exynos4_restore_pll(void)
static struct subsys_interface exynos4_pm_interface = {
.name = "exynos4_pm",
.subsys = &exynos4_subsys,
.subsys = &exynos_subsys,
.add_dev = exynos4_pm_add,
};
......
arch/arm/plat-s5p/Kconfig 已删除 100644 → 0
浏览文件 @ ab5a4e63
# arch/arm/plat-s5p/Kconfig
#
# Copyright (c) 2009 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
select ARM_VIC if !ARCH_EXYNOS
select ARM_GIC if ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
config S5P_EXT_INT
bool
help
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440 and S5P6450.
config S5P_GPIO_INT
bool
help
Common code for the GPIO interrupts (other than external interrupts.)
config S5P_HRT
bool
select SAMSUNG_DEV_PWM
help
Use the High Resolution timer support
config S5P_DEV_UART
def_bool y
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
config S5P_PM
bool
help
Common code for power management support on S5P and newer SoCs
Note: Do not select this for S5P6440 and S5P6450.
config S5P_SLEEP
bool
help
Internal config node to apply common S5P sleep management code.
Can be selected by S5P and newer SoCs with similar sleep procedure.
config S5P_DEV_FIMC0
bool
help
Compile in platform device definitions for FIMC controller 0
config S5P_DEV_FIMC1
bool
help
Compile in platform device definitions for FIMC controller 1
config S5P_DEV_FIMC2
bool
help
Compile in platform device definitions for FIMC controller 2
config S5P_DEV_FIMC3
bool
help
Compile in platform device definitions for FIMC controller 3
config S5P_DEV_JPEG
bool
help
Compile in platform device definitions for JPEG codec
config S5P_DEV_G2D
bool
help
Compile in platform device definitions for G2D device
config S5P_DEV_FIMD0
bool
help
Compile in platform device definitions for FIMD controller 0
config S5P_DEV_I2C_HDMIPHY
bool
help
Compile in platform device definitions for I2C HDMIPHY controller
config S5P_DEV_MFC
bool
help
Compile in platform device definitions for MFC
config S5P_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND controller
config S5P_DEV_CSIS0
bool
help
Compile in platform device definitions for MIPI-CSIS channel 0
config S5P_DEV_CSIS1
bool
help
Compile in platform device definitions for MIPI-CSIS channel 1
config S5P_DEV_TV
bool
help
Compile in platform device definition for TV interface
config S5P_DEV_USB_EHCI
bool
help
Compile in platform device definition for USB EHCI
config S5P_SETUP_MIPIPHY
bool
help
Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
arch/arm/plat-s5p/Makefile 已删除 100644 → 0
浏览文件 @ ab5a4e63
# arch/arm/plat-s5p/Makefile
#
# Copyright (c) 2009 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n := dummy.o
obj- :=
# Core files
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += sleep.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
arch/arm/plat-samsung/Kconfig
浏览文件 @ 2de05a57
......@@ -13,6 +13,24 @@ config PLAT_SAMSUNG
help
Base platform code for all Samsung SoC based systems
config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
select ARM_VIC if !ARCH_EXYNOS
select ARM_GIC if ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
if PLAT_SAMSUNG
# boot configurations
......@@ -50,6 +68,14 @@ config S3C_LOWLEVEL_UART_PORT
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
# timer options
config S5P_HRT
bool
select SAMSUNG_DEV_PWM
help
Use the High Resolution timer support
# clock options
config SAMSUNG_CLKSRC
......@@ -58,6 +84,11 @@ config SAMSUNG_CLKSRC
Select the clock code for the clksrc implementation
used by newer systems such as the S3C64XX.
config S5P_CLOCK
def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
# options for IRQ support
config SAMSUNG_IRQ_VIC_TIMER
......@@ -65,6 +96,22 @@ config SAMSUNG_IRQ_VIC_TIMER
help
Internal configuration to build the VIC timer interrupt code.
config S5P_IRQ
def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
help
Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
config S5P_EXT_INT
bool
help
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440 and S5P6450.
config S5P_GPIO_INT
bool
help
Common code for the GPIO interrupts (other than external interrupts.)
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
......@@ -117,6 +164,12 @@ config S3C_GPIO_TRACK
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
# uart options
config S5P_DEV_UART
def_bool y
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
# ADC driver
config S3C_ADC
......@@ -274,6 +327,76 @@ config SAMSUNG_DEV_BACKLIGHT
help
Compile in platform device definition LCD backlight with PWM Timer
config S5P_DEV_CSIS0
bool
help
Compile in platform device definitions for MIPI-CSIS channel 0
config S5P_DEV_CSIS1
bool
help
Compile in platform device definitions for MIPI-CSIS channel 1
config S5P_DEV_FIMC0
bool
help
Compile in platform device definitions for FIMC controller 0
config S5P_DEV_FIMC1
bool
help
Compile in platform device definitions for FIMC controller 1
config S5P_DEV_FIMC2
bool
help
Compile in platform device definitions for FIMC controller 2
config S5P_DEV_FIMC3
bool
help
Compile in platform device definitions for FIMC controller 3
config S5P_DEV_FIMD0
bool
help
Compile in platform device definitions for FIMD controller 0
config S5P_DEV_G2D
bool
help
Compile in platform device definitions for G2D device
config S5P_DEV_I2C_HDMIPHY
bool
help
Compile in platform device definitions for I2C HDMIPHY controller
config S5P_DEV_JPEG
bool
help
Compile in platform device definitions for JPEG codec
config S5P_DEV_MFC
bool
help
Compile in setup memory (init) code for MFC
config S5P_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND controller
config S5P_DEV_TV
bool
help
Compile in platform device definition for TV interface
config S5P_DEV_USB_EHCI
bool
help
Compile in platform device definition for USB EHCI
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
......@@ -281,6 +404,11 @@ config S3C24XX_PWM
Support for exporting the PWM timer blocks via the pwm device
system
config S5P_SETUP_MIPIPHY
bool
help
Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
# DMA
config S3C_DMA
......@@ -351,6 +479,18 @@ config SAMSUNG_WAKEMASK
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
config S5P_PM
bool
help
Common code for power management support on S5P and newer SoCs
Note: Do not select this for S5P6440 and S5P6450.
config S5P_SLEEP
bool
help
Internal config node to apply common S5P sleep management code.
Can be selected by S5P and newer SoCs with similar sleep procedure.
comment "Power Domain"
config SAMSUNG_PD
......
arch/arm/plat-samsung/Makefile
浏览文件 @ 2de05a57
......@@ -13,12 +13,18 @@ obj- :=
obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
obj-$(CONFIG_S5P_IRQ) += s5p-irq.o
obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o
# ADC
......@@ -30,9 +36,13 @@ obj-y += platformdata.o
obj-y += devs.o
obj-y += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
......@@ -47,6 +57,9 @@ obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
# PD support
obj-$(CONFIG_SAMSUNG_PD) += pd.o
......
arch/arm/plat-samsung/include/plat/cpu.h
浏览文件 @ 2de05a57
......@@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
extern struct bus_type s5p64x0_subsys;
extern struct bus_type s5pv210_subsys;
extern struct bus_type exynos4_subsys;
extern struct bus_type exynos_subsys;
extern void (*s5pc1xx_idle)(void);
......
arch/arm/plat-samsung/include/plat/s5p-clock.h
浏览文件 @ 2de05a57
......@@ -32,8 +32,10 @@ extern struct clk clk_48m;
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
extern struct clk clk_fout_bpll;
extern struct clk clk_fout_bpll_div2;
extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_mpll_div2;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
extern struct clk clk_fout_vpll;
......@@ -42,8 +44,10 @@ extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
extern struct clksrc_sources clk_src_bpll;
extern struct clksrc_sources clk_src_bpll_fout;
extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
extern struct clksrc_sources clk_src_mpll_fout;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;
......
arch/arm/plat-s5p/clock.c → arch/arm/plat-samsung/s5p-clock.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/clock.c
*
/*
* Copyright 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
......@@ -68,6 +67,11 @@ struct clk clk_fout_bpll = {
.id = -1,
};
struct clk clk_fout_bpll_div2 = {
.name = "fout_bpll_div2",
.id = -1,
};
/* CPLL clock output */
struct clk clk_fout_cpll = {
......@@ -83,6 +87,11 @@ struct clk clk_fout_mpll = {
.id = -1,
};
struct clk clk_fout_mpll_div2 = {
.name = "fout_mpll_div2",
.id = -1,
};
/* EPLL clock output */
struct clk clk_fout_epll = {
.name = "fout_epll",
......@@ -126,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
.nr_sources = ARRAY_SIZE(clk_src_bpll_list),
};
static struct clk *clk_src_bpll_fout_list[] = {
[0] = &clk_fout_bpll_div2,
[1] = &clk_fout_bpll,
};
struct clksrc_sources clk_src_bpll_fout = {
.sources = clk_src_bpll_fout_list,
.nr_sources = ARRAY_SIZE(clk_src_bpll_fout_list),
};
/* Possible clock sources for CPLL Mux */
static struct clk *clk_src_cpll_list[] = {
[0] = &clk_fin_cpll,
......@@ -148,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
static struct clk *clk_src_mpll_fout_list[] = {
[0] = &clk_fout_mpll_div2,
[1] = &clk_fout_mpll,
};
struct clksrc_sources clk_src_mpll_fout = {
.sources = clk_src_mpll_fout_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_fout_list),
};
/* Possible clock sources for EPLL Mux */
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
......
arch/arm/plat-s5p/dev-mfc.c → arch/arm/plat-samsung/s5p-dev-mfc.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/dev-mfc.c
*
/*
* Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
*
* Base S5P MFC resource and device definitions
......@@ -9,7 +8,6 @@
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
......
arch/arm/plat-s5p/dev-uart.c → arch/arm/plat-samsung/s5p-dev-uart.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/dev-uart.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
/*
* Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Base S5P UART resource and device definitions
......@@ -14,6 +13,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
......@@ -26,86 +26,38 @@
/* Serial port registrations */
static struct resource s5p_uart0_resource[] = {
[0] = {
.start = S5P_PA_UART0,
.end = S5P_PA_UART0 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART0,
.end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART0),
};
static struct resource s5p_uart1_resource[] = {
[0] = {
.start = S5P_PA_UART1,
.end = S5P_PA_UART1 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART1,
.end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART1),
};
static struct resource s5p_uart2_resource[] = {
[0] = {
.start = S5P_PA_UART2,
.end = S5P_PA_UART2 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART2,
.end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART2),
};
static struct resource s5p_uart3_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
.end = S5P_PA_UART3 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART3,
.end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART3),
#endif
};
static struct resource s5p_uart4_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
[0] = {
.start = S5P_PA_UART4,
.end = S5P_PA_UART4 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART4,
.end = IRQ_UART4,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART4),
#endif
};
static struct resource s5p_uart5_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
[0] = {
.start = S5P_PA_UART5,
.end = S5P_PA_UART5 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_UART5,
.end = IRQ_UART5,
.flags = IORESOURCE_IRQ,
},
[0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
[1] = DEFINE_RES_IRQ(IRQ_UART5),
#endif
};
......
arch/arm/plat-s5p/irq-eint.c → arch/arm/plat-samsung/s5p-irq-eint.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/irq-eint.c
*
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
......
arch/arm/plat-s5p/irq-gpioint.c → arch/arm/plat-samsung/s5p-irq-gpioint.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/irq-gpioint.c
*
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Author: Kyungmin Park <kyungmin.park@samsung.com>
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
......
arch/arm/plat-s5p/irq-pm.c → arch/arm/plat-samsung/s5p-irq-pm.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/irq-pm.c
*
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
......
arch/arm/plat-s5p/irq.c → arch/arm/plat-samsung/s5p-irq.c
浏览文件 @ 2de05a57
/* arch/arm/plat-s5p/irq.c
*
/*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
......
arch/arm/plat-s5p/pm.c → arch/arm/plat-samsung/s5p-pm.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/pm.c
*
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
......
arch/arm/plat-s5p/sleep.S → arch/arm/plat-samsung/s5p-sleep.S
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/sleep.S
*
/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
......
arch/arm/plat-s5p/s5p-time.c → arch/arm/plat-samsung/s5p-time.c
浏览文件 @ 2de05a57
/* linux/arch/arm/plat-s5p/s5p-time.c
*
/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
......
drivers/gpio/gpio-samsung.c
浏览文件 @ 2de05a57
......@@ -2452,6 +2452,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
.ngpio = EXYNOS5_GPIO_C3_NR,
.label = "GPC3",
},
}, {
.chip = {
.base = EXYNOS5_GPC4(0),
.ngpio = EXYNOS5_GPIO_C4_NR,
.label = "GPC4",
},
}, {
.chip = {
.base = EXYNOS5_GPD0(0),
......@@ -2878,8 +2884,11 @@ static __init int samsung_gpiolib_init(void)
goto err_ioremap1;
}
/* need to set base address for gpc4 */
exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
/* need to set base address for gpx */
chip = &exynos5_gpios_1[20];
chip = &exynos5_gpios_1[21];
gpx_base = gpio_base1 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或