clock-imx31.c 17.5 KB
Newer Older
S
Sascha Hauer 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
/*
 * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
 * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
26
#include <linux/clkdev.h>
S
Sascha Hauer 已提交
27 28 29

#include <asm/div64.h>

30
#include <mach/clock.h>
31
#include <mach/hardware.h>
32
#include <mach/mx31.h>
33
#include <mach/common.h>
S
Sascha Hauer 已提交
34

35
#include "crmregs-imx3.h"
S
Sascha Hauer 已提交
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */

static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
{
	u32 min_pre, temp_pre, old_err, err;

	if (div >= 512) {
		*pre = 8;
		*post = 64;
	} else if (div >= 64) {
		min_pre = (div - 1) / 64 + 1;
		old_err = 8;
		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
			err = div % temp_pre;
			if (err == 0) {
				*pre = temp_pre;
				break;
			}
			err = temp_pre - err;
			if (err < old_err) {
				old_err = err;
				*pre = temp_pre;
			}
		}
		*post = (div + *pre - 1) / *pre;
	} else if (div <= 8) {
		*pre = div;
		*post = 1;
	} else {
		*pre = 1;
		*post = div;
	}
}

static struct clk mcu_pll_clk;
static struct clk serial_pll_clk;
static struct clk ipg_clk;
static struct clk ckih_clk;

S
Sascha Hauer 已提交
76
static int cgr_enable(struct clk *clk)
S
Sascha Hauer 已提交
77 78 79
{
	u32 reg;

S
Sascha Hauer 已提交
80 81 82
	if (!clk->enable_reg)
		return 0;

S
Sascha Hauer 已提交
83 84 85 86 87 88 89
	reg = __raw_readl(clk->enable_reg);
	reg |= 3 << clk->enable_shift;
	__raw_writel(reg, clk->enable_reg);

	return 0;
}

S
Sascha Hauer 已提交
90
static void cgr_disable(struct clk *clk)
S
Sascha Hauer 已提交
91 92 93
{
	u32 reg;

S
Sascha Hauer 已提交
94 95 96
	if (!clk->enable_reg)
		return;

S
Sascha Hauer 已提交
97 98
	reg = __raw_readl(clk->enable_reg);
	reg &= ~(3 << clk->enable_shift);
S
Sascha Hauer 已提交
99 100 101 102 103

	/* special case for EMI clock */
	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
		reg |= (1 << clk->enable_shift);

S
Sascha Hauer 已提交
104 105 106
	__raw_writel(reg, clk->enable_reg);
}

S
Sascha Hauer 已提交
107
static unsigned long pll_ref_get_rate(void)
S
Sascha Hauer 已提交
108
{
S
Sascha Hauer 已提交
109 110
	unsigned long ccmr;
	unsigned int prcs;
S
Sascha Hauer 已提交
111

S
Sascha Hauer 已提交
112 113 114 115 116 117
	ccmr = __raw_readl(MXC_CCM_CCMR);
	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
	if (prcs == 0x1)
		return CKIL_CLK_FREQ * 1024;
	else
		return clk_get_rate(&ckih_clk);
S
Sascha Hauer 已提交
118 119
}

S
Sascha Hauer 已提交
120
static unsigned long usb_pll_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
121
{
S
Sascha Hauer 已提交
122
	unsigned long reg;
S
Sascha Hauer 已提交
123

S
Sascha Hauer 已提交
124
	reg = __raw_readl(MXC_CCM_UPCTL);
S
Sascha Hauer 已提交
125

S
Sascha Hauer 已提交
126 127
	return mxc_decode_pll(reg, pll_ref_get_rate());
}
S
Sascha Hauer 已提交
128

S
Sascha Hauer 已提交
129 130 131
static unsigned long serial_pll_get_rate(struct clk *clk)
{
	unsigned long reg;
S
Sascha Hauer 已提交
132

S
Sascha Hauer 已提交
133
	reg = __raw_readl(MXC_CCM_SRPCTL);
S
Sascha Hauer 已提交
134

S
Sascha Hauer 已提交
135
	return mxc_decode_pll(reg, pll_ref_get_rate());
S
Sascha Hauer 已提交
136 137
}

S
Sascha Hauer 已提交
138
static unsigned long mcu_pll_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
139 140 141 142 143
{
	unsigned long reg, ccmr;

	ccmr = __raw_readl(MXC_CCM_CCMR);

S
Sascha Hauer 已提交
144 145 146 147 148 149
	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
		return clk_get_rate(&ckih_clk);

	reg = __raw_readl(MXC_CCM_MPCTL);

	return mxc_decode_pll(reg, pll_ref_get_rate());
S
Sascha Hauer 已提交
150 151
}

S
Sascha Hauer 已提交
152
static int usb_pll_enable(struct clk *clk)
S
Sascha Hauer 已提交
153 154 155 156 157 158 159 160 161 162 163 164 165
{
	u32 reg;

	reg = __raw_readl(MXC_CCM_CCMR);
	reg |= MXC_CCM_CCMR_UPE;
	__raw_writel(reg, MXC_CCM_CCMR);

	/* No lock bit on MX31, so using max time from spec */
	udelay(80);

	return 0;
}

S
Sascha Hauer 已提交
166
static void usb_pll_disable(struct clk *clk)
S
Sascha Hauer 已提交
167 168 169 170 171 172 173 174
{
	u32 reg;

	reg = __raw_readl(MXC_CCM_CCMR);
	reg &= ~MXC_CCM_CCMR_UPE;
	__raw_writel(reg, MXC_CCM_CCMR);
}

S
Sascha Hauer 已提交
175
static int serial_pll_enable(struct clk *clk)
S
Sascha Hauer 已提交
176 177 178 179 180 181 182 183 184 185 186 187 188
{
	u32 reg;

	reg = __raw_readl(MXC_CCM_CCMR);
	reg |= MXC_CCM_CCMR_SPE;
	__raw_writel(reg, MXC_CCM_CCMR);

	/* No lock bit on MX31, so using max time from spec */
	udelay(80);

	return 0;
}

S
Sascha Hauer 已提交
189
static void serial_pll_disable(struct clk *clk)
S
Sascha Hauer 已提交
190 191 192 193 194 195 196 197 198 199 200 201
{
	u32 reg;

	reg = __raw_readl(MXC_CCM_CCMR);
	reg &= ~MXC_CCM_CCMR_SPE;
	__raw_writel(reg, MXC_CCM_CCMR);
}

#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)

S
Sascha Hauer 已提交
202
static unsigned long mcu_main_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
203 204 205 206 207 208 209 210 211
{
	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);

	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
		return clk_get_rate(&serial_pll_clk);
	else
		return clk_get_rate(&mcu_pll_clk);
}

S
Sascha Hauer 已提交
212
static unsigned long ahb_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
213 214 215 216 217 218 219 220
{
	unsigned long max_pdf;

	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (max_pdf + 1);
}

S
Sascha Hauer 已提交
221
static unsigned long ipg_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
222 223 224 225 226 227 228 229
{
	unsigned long ipg_pdf;

	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
}

S
Sascha Hauer 已提交
230
static unsigned long nfc_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
231 232 233 234 235 236 237 238
{
	unsigned long nfc_pdf;

	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
}

S
Sascha Hauer 已提交
239
static unsigned long hsp_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
240 241 242 243 244 245 246 247
{
	unsigned long hsp_pdf;

	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
}

S
Sascha Hauer 已提交
248
static unsigned long usb_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
249 250 251 252 253 254 255 256 257 258
{
	unsigned long usb_pdf, usb_prepdf;

	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
		       MXC_CCM_PDR1_USB_PODF_OFFSET);
	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
}

S
Sascha Hauer 已提交
259
static unsigned long csi_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
260 261 262 263 264 265 266 267 268 269 270 271 272
{
	u32 reg, pre, post;

	reg = __raw_readl(MXC_CCM_PDR0);
	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
	pre++;
	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
	post++;
	return clk_get_rate(clk->parent) / (pre * post);
}

S
Sascha Hauer 已提交
273
static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
S
Sascha Hauer 已提交
274 275 276 277 278 279 280 281 282 283 284 285
{
	u32 pre, post, parent = clk_get_rate(clk->parent);
	u32 div = parent / rate;

	if (parent % rate)
		div++;

	__calc_pre_post_dividers(div, &pre, &post);

	return parent / (pre * post);
}

S
Sascha Hauer 已提交
286
static int csi_set_rate(struct clk *clk, unsigned long rate)
S
Sascha Hauer 已提交
287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306
{
	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);

	div = parent / rate;

	if ((parent / div) != rate)
		return -EINVAL;

	__calc_pre_post_dividers(div, &pre, &post);

	/* Set CSI clock divider */
	reg = __raw_readl(MXC_CCM_PDR0) &
	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
	__raw_writel(reg, MXC_CCM_PDR0);

	return 0;
}

S
Sascha Hauer 已提交
307
static unsigned long ssi1_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
308 309 310 311 312 313 314 315 316 317
{
	unsigned long ssi1_pdf, ssi1_prepdf;

	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
}

S
Sascha Hauer 已提交
318
static unsigned long ssi2_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
319 320 321 322 323 324 325 326 327 328
{
	unsigned long ssi2_pdf, ssi2_prepdf;

	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
}

S
Sascha Hauer 已提交
329
static unsigned long firi_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
330 331 332 333 334 335 336 337 338 339
{
	unsigned long firi_pdf, firi_prepdf;

	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
}

S
Sascha Hauer 已提交
340
static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
S
Sascha Hauer 已提交
341 342 343 344 345 346 347 348 349 350 351 352 353 354
{
	u32 pre, post;
	u32 parent = clk_get_rate(clk->parent);
	u32 div = parent / rate;

	if (parent % rate)
		div++;

	__calc_pre_post_dividers(div, &pre, &post);

	return parent / (pre * post);

}

S
Sascha Hauer 已提交
355
static int firi_set_rate(struct clk *clk, unsigned long rate)
S
Sascha Hauer 已提交
356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375
{
	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);

	div = parent / rate;

	if ((parent / div) != rate)
		return -EINVAL;

	__calc_pre_post_dividers(div, &pre, &post);

	/* Set FIRI clock divider */
	reg = __raw_readl(MXC_CCM_PDR1) &
	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
	__raw_writel(reg, MXC_CCM_PDR1);

	return 0;
}

S
Sascha Hauer 已提交
376
static unsigned long mbx_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
377 378 379 380
{
	return clk_get_rate(clk->parent) / 2;
}

S
Sascha Hauer 已提交
381
static unsigned long mstick1_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
382 383 384 385 386 387 388 389
{
	unsigned long msti_pdf;

	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
			MXC_CCM_PDR2_MST1_PDF_OFFSET);
	return clk_get_rate(clk->parent) / (msti_pdf + 1);
}

S
Sascha Hauer 已提交
390
static unsigned long mstick2_get_rate(struct clk *clk)
S
Sascha Hauer 已提交
391 392 393 394 395 396 397 398 399 400 401 402 403 404 405
{
	unsigned long msti_pdf;

	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
			MXC_CCM_PDR2_MST2_PDF_OFFSET);
	return clk_get_rate(clk->parent) / (msti_pdf + 1);
}

static unsigned long ckih_rate;

static unsigned long clk_ckih_get_rate(struct clk *clk)
{
	return ckih_rate;
}

D
Daniel Mack 已提交
406 407 408 409 410
static unsigned long clk_ckil_get_rate(struct clk *clk)
{
	return CKIL_CLK_FREQ;
}

S
Sascha Hauer 已提交
411 412 413 414 415 416
static struct clk ckih_clk = {
	.get_rate = clk_ckih_get_rate,
};

static struct clk mcu_pll_clk = {
	.parent = &ckih_clk,
S
Sascha Hauer 已提交
417
	.get_rate = mcu_pll_get_rate,
S
Sascha Hauer 已提交
418 419 420 421
};

static struct clk mcu_main_clk = {
	.parent = &mcu_pll_clk,
S
Sascha Hauer 已提交
422
	.get_rate = mcu_main_get_rate,
S
Sascha Hauer 已提交
423 424 425 426
};

static struct clk serial_pll_clk = {
	.parent = &ckih_clk,
S
Sascha Hauer 已提交
427 428 429
	.get_rate = serial_pll_get_rate,
	.enable = serial_pll_enable,
	.disable = serial_pll_disable,
S
Sascha Hauer 已提交
430 431 432 433
};

static struct clk usb_pll_clk = {
	.parent = &ckih_clk,
S
Sascha Hauer 已提交
434 435 436
	.get_rate = usb_pll_get_rate,
	.enable = usb_pll_enable,
	.disable = usb_pll_disable,
S
Sascha Hauer 已提交
437 438 439 440
};

static struct clk ahb_clk = {
	.parent = &mcu_main_clk,
S
Sascha Hauer 已提交
441 442 443 444 445 446 447 448 449 450 451 452 453 454
	.get_rate = ahb_get_rate,
};

#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
	static struct clk name = {			\
		.id		= i,			\
		.enable_reg	= er,			\
		.enable_shift	= es,			\
		.get_rate	= gr,			\
		.enable		= cgr_enable,		\
		.disable	= cgr_disable,		\
		.secondary	= s,			\
		.parent		= p,			\
	}
S
Sascha Hauer 已提交
455

S
Sascha Hauer 已提交
456 457 458 459 460 461 462 463 464 465 466 467 468
#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
	static struct clk name = {				\
		.id		= i,				\
		.enable_reg	= er,				\
		.enable_shift	= es,				\
		.get_rate	= getsetround##_get_rate,	\
		.set_rate	= getsetround##_set_rate,	\
		.round_rate	= getsetround##_round_rate,	\
		.enable		= cgr_enable,			\
		.disable	= cgr_disable,			\
		.secondary	= s,				\
		.parent		= p,				\
	}
S
Sascha Hauer 已提交
469

S
Sascha Hauer 已提交
470
DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
471
DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
S
Sascha Hauer 已提交
472 473 474 475 476 477 478

DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
F
Fabio Estevam 已提交
479
DEFINE_CLOCK(pata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
480
DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
S
Sascha Hauer 已提交
481 482 483 484 485 486 487 488 489 490 491 492
DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);

DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
493
DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
494
DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
S
Sascha Hauer 已提交
495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525
DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);

DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);

DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);

#define _REGISTER_CLOCK(d, n, c) \
	{ \
		.dev_id = d, \
		.con_id = n, \
		.clk = &c, \
	},

526
static struct clk_lookup lookups[] = {
S
Sascha Hauer 已提交
527
	_REGISTER_CLOCK(NULL, "emi", emi_clk)
528 529 530
	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
S
Sascha Hauer 已提交
531 532
	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
533
	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
S
Sascha Hauer 已提交
534 535 536 537 538 539 540
	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
S
Sascha Hauer 已提交
541 542 543 544 545 546
	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
S
Sascha Hauer 已提交
547 548
	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
549
	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
550 551 552 553 554 555
	/* i.mx31 has the i.mx21 type uart */
	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
S
Sascha Hauer 已提交
556 557 558 559 560 561
	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
562 563
	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
S
Sascha Hauer 已提交
564
	_REGISTER_CLOCK(NULL, "firi", firi_clk)
F
Fabio Estevam 已提交
565
	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
S
Sascha Hauer 已提交
566 567
	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
	_REGISTER_CLOCK(NULL, "rng", rng_clk)
568
	_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
S
Sascha Hauer 已提交
569 570 571 572 573 574 575
	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
	_REGISTER_CLOCK(NULL, "scc", scc_clk)
	_REGISTER_CLOCK(NULL, "iim", iim_clk)
	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
S
Sascha Hauer 已提交
576 577
};

578
int __init mx31_clocks_init(unsigned long fref)
S
Sascha Hauer 已提交
579 580 581 582 583
{
	u32 reg;

	ckih_rate = fref;

584
	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
S
Sascha Hauer 已提交
585

586 587 588 589 590 591 592
	/* change the csi_clk parent if necessary */
	reg = __raw_readl(MXC_CCM_CCMR);
	if (!(reg & MXC_CCM_CCMR_CSCS))
		if (clk_set_parent(&csi_clk, &usb_pll_clk))
			pr_err("%s: error changing csi_clk parent\n", __func__);


S
Sascha Hauer 已提交
593
	/* Turn off all possible clocks */
S
Sascha Hauer 已提交
594
	__raw_writel((3 << 4), MXC_CCM_CGR0);
S
Sascha Hauer 已提交
595
	__raw_writel(0, MXC_CCM_CGR1);
S
Sascha Hauer 已提交
596
	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
S
Sascha Hauer 已提交
597 598 599 600
		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
					   MX32, but still required to be set */
		     MXC_CCM_CGR2);

601 602 603 604 605 606
	/*
	 * Before turning off usb_pll make sure ipg_per_clk is generated
	 * by ipg_clk and not usb_pll.
	 */
	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);

S
Sascha Hauer 已提交
607
	usb_pll_disable(&usb_pll_clk);
S
Sascha Hauer 已提交
608 609 610 611 612 613

	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));

	clk_enable(&gpt_clk);
	clk_enable(&emi_clk);
	clk_enable(&iim_clk);
614 615
	mx31_revision();
	clk_disable(&iim_clk);
S
Sascha Hauer 已提交
616 617 618

	clk_enable(&serial_pll_clk);

619
	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
S
Sascha Hauer 已提交
620 621 622 623 624 625
		reg = __raw_readl(MXC_CCM_PMCR1);
		/* No PLL restart on DVFS switch; enable auto EMI handshake */
		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
		__raw_writel(reg, MXC_CCM_PMCR1);
	}

626 627
	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
			MX31_INT_GPT);
628

S
Sascha Hauer 已提交
629 630
	return 0;
}