wl1251_main.c 29.7 KB
Newer Older
K
Kalle Valo 已提交
1
/*
2
 * This file is part of wl1251
K
Kalle Valo 已提交
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
 *
 * Copyright (C) 2008-2009 Nokia Corporation
 *
 * Contact: Kalle Valo <kalle.valo@nokia.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/crc32.h>
#include <linux/etherdevice.h>
31
#include <linux/vmalloc.h>
K
Kalle Valo 已提交
32

K
Kalle Valo 已提交
33
#include "wl1251.h"
K
Kalle Valo 已提交
34
#include "wl12xx_80211.h"
35
#include "wl1251_reg.h"
36
#include "wl1251_io.h"
37
#include "wl1251_cmd.h"
38
#include "wl1251_event.h"
39
#include "wl1251_tx.h"
40 41 42 43
#include "wl1251_rx.h"
#include "wl1251_ps.h"
#include "wl1251_init.h"
#include "wl1251_debugfs.h"
K
Kalle Valo 已提交
44
#include "wl1251_boot.h"
K
Kalle Valo 已提交
45

46
void wl1251_enable_interrupts(struct wl1251 *wl)
K
Kalle Valo 已提交
47
{
48 49 50 51 52 53
	wl->if_ops->enable_irq(wl);
}

void wl1251_disable_interrupts(struct wl1251 *wl)
{
	wl->if_ops->disable_irq(wl);
K
Kalle Valo 已提交
54 55
}

56
static void wl1251_power_off(struct wl1251 *wl)
K
Kalle Valo 已提交
57 58 59 60
{
	wl->set_power(false);
}

61
static void wl1251_power_on(struct wl1251 *wl)
K
Kalle Valo 已提交
62 63 64 65
{
	wl->set_power(true);
}

66
static int wl1251_fetch_firmware(struct wl1251 *wl)
K
Kalle Valo 已提交
67 68
{
	const struct firmware *fw;
69
	struct device *dev = wiphy_dev(wl->hw->wiphy);
K
Kalle Valo 已提交
70 71
	int ret;

K
Kalle Valo 已提交
72
	ret = request_firmware(&fw, WL1251_FW_NAME, dev);
K
Kalle Valo 已提交
73 74

	if (ret < 0) {
75
		wl1251_error("could not get firmware: %d", ret);
K
Kalle Valo 已提交
76 77 78 79
		return ret;
	}

	if (fw->size % 4) {
80
		wl1251_error("firmware size is not multiple of 32 bits: %zu",
K
Kalle Valo 已提交
81 82 83 84 85 86
			     fw->size);
		ret = -EILSEQ;
		goto out;
	}

	wl->fw_len = fw->size;
87
	wl->fw = vmalloc(wl->fw_len);
K
Kalle Valo 已提交
88 89

	if (!wl->fw) {
90
		wl1251_error("could not allocate memory for the firmware");
K
Kalle Valo 已提交
91 92 93 94 95 96 97 98 99 100 101 102 103 104
		ret = -ENOMEM;
		goto out;
	}

	memcpy(wl->fw, fw->data, wl->fw_len);

	ret = 0;

out:
	release_firmware(fw);

	return ret;
}

105
static int wl1251_fetch_nvs(struct wl1251 *wl)
K
Kalle Valo 已提交
106 107
{
	const struct firmware *fw;
108
	struct device *dev = wiphy_dev(wl->hw->wiphy);
K
Kalle Valo 已提交
109 110
	int ret;

K
Kalle Valo 已提交
111
	ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
K
Kalle Valo 已提交
112 113

	if (ret < 0) {
114
		wl1251_error("could not get nvs file: %d", ret);
K
Kalle Valo 已提交
115 116 117 118
		return ret;
	}

	if (fw->size % 4) {
119
		wl1251_error("nvs size is not multiple of 32 bits: %zu",
K
Kalle Valo 已提交
120 121 122 123 124 125 126 127 128
			     fw->size);
		ret = -EILSEQ;
		goto out;
	}

	wl->nvs_len = fw->size;
	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);

	if (!wl->nvs) {
129
		wl1251_error("could not allocate memory for the nvs file");
K
Kalle Valo 已提交
130 131 132 133 134 135 136 137 138 139 140 141 142 143
		ret = -ENOMEM;
		goto out;
	}

	memcpy(wl->nvs, fw->data, wl->nvs_len);

	ret = 0;

out:
	release_firmware(fw);

	return ret;
}

144
static void wl1251_fw_wakeup(struct wl1251 *wl)
K
Kalle Valo 已提交
145 146 147 148
{
	u32 elp_reg;

	elp_reg = ELPCTRL_WAKE_UP;
149 150
	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
	elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
K
Kalle Valo 已提交
151

K
Kalle Valo 已提交
152
	if (!(elp_reg & ELPCTRL_WLAN_READY))
153
		wl1251_warning("WLAN not ready");
K
Kalle Valo 已提交
154 155
}

156
static int wl1251_chip_wakeup(struct wl1251 *wl)
K
Kalle Valo 已提交
157 158 159
{
	int ret = 0;

160
	wl1251_power_on(wl);
K
Kalle Valo 已提交
161
	msleep(WL1251_POWER_ON_SLEEP);
162
	wl->if_ops->reset(wl);
K
Kalle Valo 已提交
163 164 165

	/* We don't need a real memory partition here, because we only want
	 * to use the registers at this point. */
166
	wl1251_set_partition(wl,
K
Kalle Valo 已提交
167 168 169 170 171 172
			     0x00000000,
			     0x00000000,
			     REGISTERS_BASE,
			     REGISTERS_DOWN_SIZE);

	/* ELP module wake up */
173
	wl1251_fw_wakeup(wl);
K
Kalle Valo 已提交
174 175 176 177

	/* whal_FwCtrl_BootSm() */

	/* 0. read chip id from CHIP_ID */
K
Kalle Valo 已提交
178
	wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
K
Kalle Valo 已提交
179 180 181

	/* 1. check if chip id is valid */

K
Kalle Valo 已提交
182
	switch (wl->chip_id) {
K
Kalle Valo 已提交
183
	case CHIP_ID_1251_PG12:
184
		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
K
Kalle Valo 已提交
185
			     wl->chip_id);
K
Kalle Valo 已提交
186 187
		break;
	case CHIP_ID_1251_PG11:
188 189 190
		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
			     wl->chip_id);
		break;
J
John W. Linville 已提交
191
	case CHIP_ID_1251_PG10:
K
Kalle Valo 已提交
192
	default:
K
Kalle Valo 已提交
193
		wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
K
Kalle Valo 已提交
194 195 196 197 198
		ret = -ENODEV;
		goto out;
	}

	if (wl->fw == NULL) {
199
		ret = wl1251_fetch_firmware(wl);
K
Kalle Valo 已提交
200 201 202 203 204 205
		if (ret < 0)
			goto out;
	}

	/* No NVS from netlink, try to get it from the filesystem */
	if (wl->nvs == NULL) {
206
		ret = wl1251_fetch_nvs(wl);
K
Kalle Valo 已提交
207 208 209 210 211 212 213 214
		if (ret < 0)
			goto out;
	}

out:
	return ret;
}

J
Janne Ylalehto 已提交
215
#define WL1251_IRQ_LOOP_COUNT 10
K
Kalle Valo 已提交
216 217
static void wl1251_irq_work(struct work_struct *work)
{
J
Janne Ylalehto 已提交
218
	u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
K
Kalle Valo 已提交
219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238
	struct wl1251 *wl =
		container_of(work, struct wl1251, irq_work);
	int ret;

	mutex_lock(&wl->mutex);

	wl1251_debug(DEBUG_IRQ, "IRQ work");

	if (wl->state == WL1251_STATE_OFF)
		goto out;

	ret = wl1251_ps_elp_wakeup(wl);
	if (ret < 0)
		goto out;

	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);

	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
	wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);

J
Janne Ylalehto 已提交
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272
	do {
		if (wl->data_path) {
			wl->rx_counter = wl1251_mem_read32(
				wl, wl->data_path->rx_control_addr);

			/* We handle a frmware bug here */
			switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
			case 0:
				wl1251_debug(DEBUG_IRQ,
					     "RX: FW and host in sync");
				intr &= ~WL1251_ACX_INTR_RX0_DATA;
				intr &= ~WL1251_ACX_INTR_RX1_DATA;
				break;
			case 1:
				wl1251_debug(DEBUG_IRQ, "RX: FW +1");
				intr |= WL1251_ACX_INTR_RX0_DATA;
				intr &= ~WL1251_ACX_INTR_RX1_DATA;
				break;
			case 2:
				wl1251_debug(DEBUG_IRQ, "RX: FW +2");
				intr |= WL1251_ACX_INTR_RX0_DATA;
				intr |= WL1251_ACX_INTR_RX1_DATA;
				break;
			default:
				wl1251_warning(
					"RX: FW and host out of sync: %d",
					wl->rx_counter - wl->rx_handled);
				break;
			}

			wl->rx_handled = wl->rx_counter;

			wl1251_debug(DEBUG_IRQ, "RX counter: %d",
				     wl->rx_counter);
K
Kalle Valo 已提交
273 274
		}

J
Janne Ylalehto 已提交
275
		intr &= wl->intr_mask;
K
Kalle Valo 已提交
276

J
Janne Ylalehto 已提交
277 278 279 280
		if (intr == 0) {
			wl1251_debug(DEBUG_IRQ, "INTR is 0");
			goto out_sleep;
		}
K
Kalle Valo 已提交
281

J
Janne Ylalehto 已提交
282 283 284 285
		if (intr & WL1251_ACX_INTR_RX0_DATA) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
			wl1251_rx(wl);
		}
K
Kalle Valo 已提交
286

J
Janne Ylalehto 已提交
287 288 289 290
		if (intr & WL1251_ACX_INTR_RX1_DATA) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
			wl1251_rx(wl);
		}
K
Kalle Valo 已提交
291

J
Janne Ylalehto 已提交
292 293 294 295
		if (intr & WL1251_ACX_INTR_TX_RESULT) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
			wl1251_tx_complete(wl);
		}
K
Kalle Valo 已提交
296

J
Janne Ylalehto 已提交
297 298 299 300 301 302 303 304 305
		if (intr & (WL1251_ACX_INTR_EVENT_A |
			    WL1251_ACX_INTR_EVENT_B)) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)",
				     intr);
			if (intr & WL1251_ACX_INTR_EVENT_A)
				wl1251_event_handle(wl, 0);
			else
				wl1251_event_handle(wl, 1);
		}
K
Kalle Valo 已提交
306

J
Janne Ylalehto 已提交
307 308 309
		if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
			wl1251_debug(DEBUG_IRQ,
				     "WL1251_ACX_INTR_INIT_COMPLETE");
K
Kalle Valo 已提交
310

311 312
		if (--ctr == 0)
			break;
K
Kalle Valo 已提交
313

314 315
		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
	} while (intr);
K
Kalle Valo 已提交
316 317

out_sleep:
J
Janne Ylalehto 已提交
318
	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
K
Kalle Valo 已提交
319 320 321 322 323 324
	wl1251_ps_elp_sleep(wl);

out:
	mutex_unlock(&wl->mutex);
}

K
Kalle Valo 已提交
325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352
static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
		       u16 beacon_interval, u8 dtim_period)
{
	int ret;

	ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
				     DEFAULT_HW_GEN_MODULATION_TYPE,
				     wl->tx_mgmt_frm_rate,
				     wl->tx_mgmt_frm_mod);
	if (ret < 0)
		goto out;


	ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
			      dtim_period);
	if (ret < 0)
		goto out;

	/*
	 * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
	 * locking we just sleep instead, for now
	 */
	msleep(10);

out:
	return ret;
}

353
static void wl1251_filter_work(struct work_struct *work)
K
Kalle Valo 已提交
354
{
355 356
	struct wl1251 *wl =
		container_of(work, struct wl1251, filter_work);
K
Kalle Valo 已提交
357 358 359 360
	int ret;

	mutex_lock(&wl->mutex);

361
	if (wl->state == WL1251_STATE_OFF)
K
Kalle Valo 已提交
362 363
		goto out;

364
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
365 366
	if (ret < 0)
		goto out;
367

K
Kalle Valo 已提交
368 369
	ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
			  wl->dtim_period);
K
Kalle Valo 已提交
370
	if (ret < 0)
K
Kalle Valo 已提交
371
		goto out_sleep;
K
Kalle Valo 已提交
372

K
Kalle Valo 已提交
373
out_sleep:
374
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
375 376

out:
K
Kalle Valo 已提交
377 378 379
	mutex_unlock(&wl->mutex);
}

380
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
K
Kalle Valo 已提交
381
{
382
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
383 384 385

	skb_queue_tail(&wl->tx_queue, skb);

386 387 388 389 390
	/*
	 * The chip specific setup must run before the first TX packet -
	 * before that, the tx_work will not be initialized!
	 */

391
	ieee80211_queue_work(wl->hw, &wl->tx_work);
K
Kalle Valo 已提交
392 393 394 395 396

	/*
	 * The workqueue is slow to process the tx_queue and we need stop
	 * the queue here, otherwise the queue will get too long.
	 */
397
	if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
398
		wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
K
Kalle Valo 已提交
399 400 401 402 403 404 405 406 407 408 409 410 411
		ieee80211_stop_queues(wl->hw);

		/*
		 * FIXME: this is racy, the variable is not properly
		 * protected. Maybe fix this by removing the stupid
		 * variable altogether and checking the real queue state?
		 */
		wl->tx_queue_stopped = true;
	}

	return NETDEV_TX_OK;
}

412
static int wl1251_op_start(struct ieee80211_hw *hw)
K
Kalle Valo 已提交
413
{
414
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
415 416
	int ret = 0;

417
	wl1251_debug(DEBUG_MAC80211, "mac80211 start");
K
Kalle Valo 已提交
418 419 420

	mutex_lock(&wl->mutex);

421 422
	if (wl->state != WL1251_STATE_OFF) {
		wl1251_error("cannot start because not in off state: %d",
K
Kalle Valo 已提交
423 424 425 426 427
			     wl->state);
		ret = -EBUSY;
		goto out;
	}

428
	ret = wl1251_chip_wakeup(wl);
K
Kalle Valo 已提交
429
	if (ret < 0)
430
		goto out;
K
Kalle Valo 已提交
431

K
Kalle Valo 已提交
432
	ret = wl1251_boot(wl);
K
Kalle Valo 已提交
433 434 435
	if (ret < 0)
		goto out;

K
Kalle Valo 已提交
436
	ret = wl1251_hw_init(wl);
K
Kalle Valo 已提交
437 438 439
	if (ret < 0)
		goto out;

440
	ret = wl1251_acx_station_id(wl);
K
Kalle Valo 已提交
441 442 443
	if (ret < 0)
		goto out;

444
	wl->state = WL1251_STATE_ON;
K
Kalle Valo 已提交
445

K
Kalle Valo 已提交
446
	wl1251_info("firmware booted (%s)", wl->fw_ver);
K
Kalle Valo 已提交
447 448 449

out:
	if (ret < 0)
450
		wl1251_power_off(wl);
K
Kalle Valo 已提交
451 452 453 454 455 456

	mutex_unlock(&wl->mutex);

	return ret;
}

457
static void wl1251_op_stop(struct ieee80211_hw *hw)
K
Kalle Valo 已提交
458
{
459
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
460

461
	wl1251_info("down");
K
Kalle Valo 已提交
462

463
	wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
K
Kalle Valo 已提交
464 465 466

	mutex_lock(&wl->mutex);

467
	WARN_ON(wl->state != WL1251_STATE_ON);
K
Kalle Valo 已提交
468 469 470 471 472 473 474 475

	if (wl->scanning) {
		mutex_unlock(&wl->mutex);
		ieee80211_scan_completed(wl->hw, true);
		mutex_lock(&wl->mutex);
		wl->scanning = false;
	}

476
	wl->state = WL1251_STATE_OFF;
K
Kalle Valo 已提交
477

478
	wl1251_disable_interrupts(wl);
K
Kalle Valo 已提交
479 480 481 482 483 484 485 486 487 488

	mutex_unlock(&wl->mutex);

	cancel_work_sync(&wl->irq_work);
	cancel_work_sync(&wl->tx_work);
	cancel_work_sync(&wl->filter_work);

	mutex_lock(&wl->mutex);

	/* let's notify MAC80211 about the remaining pending TX frames */
K
Kalle Valo 已提交
489
	wl1251_tx_flush(wl);
490
	wl1251_power_off(wl);
K
Kalle Valo 已提交
491 492 493 494 495 496 497 498 499 500 501 502 503 504

	memset(wl->bssid, 0, ETH_ALEN);
	wl->listen_int = 1;
	wl->bss_type = MAX_BSS_TYPE;

	wl->data_in_count = 0;
	wl->rx_counter = 0;
	wl->rx_handled = 0;
	wl->rx_current_buffer = 0;
	wl->rx_last_id = 0;
	wl->next_tx_complete = 0;
	wl->elp = false;
	wl->psm = 0;
	wl->tx_queue_stopped = false;
505
	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
506
	wl->channel = WL1251_DEFAULT_CHANNEL;
K
Kalle Valo 已提交
507

508
	wl1251_debugfs_reset(wl);
K
Kalle Valo 已提交
509 510 511 512

	mutex_unlock(&wl->mutex);
}

513
static int wl1251_op_add_interface(struct ieee80211_hw *hw,
514
				   struct ieee80211_vif *vif)
K
Kalle Valo 已提交
515
{
516
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
517 518
	int ret = 0;

J
Johannes Berg 已提交
519
	wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
520
		     vif->type, vif->addr);
K
Kalle Valo 已提交
521 522

	mutex_lock(&wl->mutex);
523 524 525 526 527
	if (wl->vif) {
		ret = -EBUSY;
		goto out;
	}

528
	wl->vif = vif;
K
Kalle Valo 已提交
529

530
	switch (vif->type) {
K
Kalle Valo 已提交
531 532 533 534 535 536 537 538 539 540 541
	case NL80211_IFTYPE_STATION:
		wl->bss_type = BSS_TYPE_STA_BSS;
		break;
	case NL80211_IFTYPE_ADHOC:
		wl->bss_type = BSS_TYPE_IBSS;
		break;
	default:
		ret = -EOPNOTSUPP;
		goto out;
	}

542 543
	if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
		memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
K
Kalle Valo 已提交
544
		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
545
		ret = wl1251_acx_station_id(wl);
K
Kalle Valo 已提交
546 547 548 549 550 551 552 553 554
		if (ret < 0)
			goto out;
	}

out:
	mutex_unlock(&wl->mutex);
	return ret;
}

555
static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
556
					 struct ieee80211_vif *vif)
K
Kalle Valo 已提交
557
{
558 559 560
	struct wl1251 *wl = hw->priv;

	mutex_lock(&wl->mutex);
561
	wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
562 563
	wl->vif = NULL;
	mutex_unlock(&wl->mutex);
K
Kalle Valo 已提交
564 565
}

566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586
static int wl1251_build_qos_null_data(struct wl1251 *wl)
{
	struct ieee80211_qos_hdr template;

	memset(&template, 0, sizeof(template));

	memcpy(template.addr1, wl->bssid, ETH_ALEN);
	memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
	memcpy(template.addr3, wl->bssid, ETH_ALEN);

	template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
					     IEEE80211_STYPE_QOS_NULLFUNC |
					     IEEE80211_FCTL_TODS);

	/* FIXME: not sure what priority to use here */
	template.qos_ctrl = cpu_to_le16(0);

	return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template,
				       sizeof(template));
}

587
static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
K
Kalle Valo 已提交
588
{
589
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
590 591 592 593 594
	struct ieee80211_conf *conf = &hw->conf;
	int channel, ret = 0;

	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);

595
	wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
K
Kalle Valo 已提交
596 597 598 599 600 601
		     channel,
		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
		     conf->power_level);

	mutex_lock(&wl->mutex);

602
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
603 604
	if (ret < 0)
		goto out;
605

K
Kalle Valo 已提交
606
	if (channel != wl->channel) {
607 608
		wl->channel = channel;

K
Kalle Valo 已提交
609 610
		ret = wl1251_join(wl, wl->bss_type, wl->channel,
				  wl->beacon_int, wl->dtim_period);
K
Kalle Valo 已提交
611
		if (ret < 0)
K
Kalle Valo 已提交
612
			goto out_sleep;
K
Kalle Valo 已提交
613 614 615
	}

	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
616
		wl1251_debug(DEBUG_PSM, "psm enabled");
K
Kalle Valo 已提交
617 618 619

		wl->psm_requested = true;

620 621 622 623 624
		wl->dtim_period = conf->ps_dtim_period;

		ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
						  wl->dtim_period);

K
Kalle Valo 已提交
625
		/*
626
		 * mac80211 enables PSM only if we're already associated.
K
Kalle Valo 已提交
627
		 */
628
		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
629 630
		if (ret < 0)
			goto out_sleep;
K
Kalle Valo 已提交
631 632
	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
		   wl->psm_requested) {
633
		wl1251_debug(DEBUG_PSM, "psm disabled");
K
Kalle Valo 已提交
634 635 636

		wl->psm_requested = false;

637
		if (wl->psm) {
638
			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
639 640 641
			if (ret < 0)
				goto out_sleep;
		}
K
Kalle Valo 已提交
642 643 644
	}

	if (conf->power_level != wl->power_level) {
645
		ret = wl1251_acx_tx_power(wl, conf->power_level);
K
Kalle Valo 已提交
646
		if (ret < 0)
647
			goto out_sleep;
K
Kalle Valo 已提交
648 649 650 651

		wl->power_level = conf->power_level;
	}

K
Kalle Valo 已提交
652
out_sleep:
653
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
654 655

out:
K
Kalle Valo 已提交
656
	mutex_unlock(&wl->mutex);
K
Kalle Valo 已提交
657

K
Kalle Valo 已提交
658 659 660
	return ret;
}

661
#define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
K
Kalle Valo 已提交
662 663 664 665 666 667
				  FIF_ALLMULTI | \
				  FIF_FCSFAIL | \
				  FIF_BCN_PRBRESP_PROMISC | \
				  FIF_CONTROL | \
				  FIF_OTHER_BSS)

668
static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
669
				       unsigned int changed,
670
				       unsigned int *total,u64 multicast)
K
Kalle Valo 已提交
671
{
672
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
673

674
	wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
K
Kalle Valo 已提交
675

676 677
	*total &= WL1251_SUPPORTED_FILTERS;
	changed &= WL1251_SUPPORTED_FILTERS;
K
Kalle Valo 已提交
678 679 680 681 682 683 684

	if (changed == 0)
		/* no filters which we support changed */
		return;

	/* FIXME: wl->rx_config and wl->rx_filter are not protected */

685 686
	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
K
Kalle Valo 已提交
687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717

	if (*total & FIF_PROMISC_IN_BSS) {
		wl->rx_config |= CFG_BSSID_FILTER_EN;
		wl->rx_config |= CFG_RX_ALL_GOOD;
	}
	if (*total & FIF_ALLMULTI)
		/*
		 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
		 * all multicast frames
		 */
		wl->rx_config &= ~CFG_MC_FILTER_EN;
	if (*total & FIF_FCSFAIL)
		wl->rx_filter |= CFG_RX_FCS_ERROR;
	if (*total & FIF_BCN_PRBRESP_PROMISC) {
		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
		wl->rx_config &= ~CFG_SSID_FILTER_EN;
	}
	if (*total & FIF_CONTROL)
		wl->rx_filter |= CFG_RX_CTL_EN;
	if (*total & FIF_OTHER_BSS)
		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;

	/*
	 * FIXME: workqueues need to be properly cancelled on stop(), for
	 * now let's just disable changing the filter settings. They will
	 * be updated any on config().
	 */
	/* schedule_work(&wl->filter_work); */
}

/* HW encryption */
718 719
static int wl1251_set_key_type(struct wl1251 *wl,
			       struct wl1251_cmd_set_keys *key,
K
Kalle Valo 已提交
720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748
			       enum set_key_cmd cmd,
			       struct ieee80211_key_conf *mac80211_key,
			       const u8 *addr)
{
	switch (mac80211_key->alg) {
	case ALG_WEP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_WEP_DEFAULT;
		else
			key->key_type = KEY_WEP_ADDR;

		mac80211_key->hw_key_idx = mac80211_key->keyidx;
		break;
	case ALG_TKIP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_TKIP_MIC_GROUP;
		else
			key->key_type = KEY_TKIP_MIC_PAIRWISE;

		mac80211_key->hw_key_idx = mac80211_key->keyidx;
		break;
	case ALG_CCMP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_AES_GROUP;
		else
			key->key_type = KEY_AES_PAIRWISE;
		mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
		break;
	default:
749
		wl1251_error("Unknown key algo 0x%x", mac80211_key->alg);
K
Kalle Valo 已提交
750 751 752 753 754 755
		return -EOPNOTSUPP;
	}

	return 0;
}

756
static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
K
Kalle Valo 已提交
757 758 759 760
			     struct ieee80211_vif *vif,
			     struct ieee80211_sta *sta,
			     struct ieee80211_key_conf *key)
{
761 762
	struct wl1251 *wl = hw->priv;
	struct wl1251_cmd_set_keys *wl_cmd;
K
Kalle Valo 已提交
763 764 765 766 767 768
	const u8 *addr;
	int ret;

	static const u8 bcast_addr[ETH_ALEN] =
		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };

769
	wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
K
Kalle Valo 已提交
770

771 772 773 774 775
	wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
	if (!wl_cmd) {
		ret = -ENOMEM;
		goto out;
	}
K
Kalle Valo 已提交
776 777 778

	addr = sta ? sta->addr : bcast_addr;

779 780 781
	wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
	wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
	wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
K
Kalle Valo 已提交
782
		     key->alg, key->keyidx, key->keylen, key->flags);
783
	wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
K
Kalle Valo 已提交
784

785 786 787 788 789 790
	if (is_zero_ether_addr(addr)) {
		/* We dont support TX only encryption */
		ret = -EOPNOTSUPP;
		goto out;
	}

K
Kalle Valo 已提交
791 792
	mutex_lock(&wl->mutex);

793
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
794 795
	if (ret < 0)
		goto out_unlock;
796

K
Kalle Valo 已提交
797 798
	switch (cmd) {
	case SET_KEY:
799
		wl_cmd->key_action = KEY_ADD_OR_REPLACE;
K
Kalle Valo 已提交
800 801
		break;
	case DISABLE_KEY:
802
		wl_cmd->key_action = KEY_REMOVE;
K
Kalle Valo 已提交
803 804
		break;
	default:
805
		wl1251_error("Unsupported key cmd 0x%x", cmd);
K
Kalle Valo 已提交
806 807 808
		break;
	}

809
	ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
K
Kalle Valo 已提交
810
	if (ret < 0) {
811
		wl1251_error("Set KEY type failed");
K
Kalle Valo 已提交
812
		goto out_sleep;
K
Kalle Valo 已提交
813 814
	}

815 816
	if (wl_cmd->key_type != KEY_WEP_DEFAULT)
		memcpy(wl_cmd->addr, addr, ETH_ALEN);
K
Kalle Valo 已提交
817

818 819
	if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
	    (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
K
Kalle Valo 已提交
820 821 822 823 824 825
		/*
		 * We get the key in the following form:
		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
		 * but the target is expecting:
		 * TKIP - RX MIC - TX MIC
		 */
826 827 828
		memcpy(wl_cmd->key, key->key, 16);
		memcpy(wl_cmd->key + 16, key->key + 24, 8);
		memcpy(wl_cmd->key + 24, key->key + 16, 8);
K
Kalle Valo 已提交
829 830

	} else {
831
		memcpy(wl_cmd->key, key->key, key->keylen);
K
Kalle Valo 已提交
832
	}
833
	wl_cmd->key_size = key->keylen;
K
Kalle Valo 已提交
834

835 836
	wl_cmd->id = key->keyidx;
	wl_cmd->ssid_profile = 0;
K
Kalle Valo 已提交
837

838
	wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
K
Kalle Valo 已提交
839

840
	ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
841
	if (ret < 0) {
842
		wl1251_warning("could not set keys");
K
Kalle Valo 已提交
843
		goto out_sleep;
K
Kalle Valo 已提交
844 845
	}

K
Kalle Valo 已提交
846
out_sleep:
847
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
848 849

out_unlock:
K
Kalle Valo 已提交
850
	mutex_unlock(&wl->mutex);
851 852 853 854

out:
	kfree(wl_cmd);

K
Kalle Valo 已提交
855 856 857
	return ret;
}

858
static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
859 860
			     struct cfg80211_scan_request *req)
{
861
	struct wl1251 *wl = hw->priv;
862
	struct sk_buff *skb;
K
Kalle Valo 已提交
863
	size_t ssid_len = 0;
K
Kalle Valo 已提交
864 865
	u8 *ssid = NULL;
	int ret;
K
Kalle Valo 已提交
866

867
	wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
K
Kalle Valo 已提交
868 869 870 871 872 873 874

	if (req->n_ssids) {
		ssid = req->ssids[0].ssid;
		ssid_len = req->ssids[0].ssid_len;
	}

	mutex_lock(&wl->mutex);
K
Kalle Valo 已提交
875

K
Kalle Valo 已提交
876 877 878 879 880 881
	if (wl->scanning) {
		wl1251_debug(DEBUG_SCAN, "scan already in progress");
		ret = -EINVAL;
		goto out;
	}

882
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
883 884
	if (ret < 0)
		goto out;
885

886 887 888 889 890 891 892 893 894 895
	skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
				     req->ie, req->ie_len);
	if (!skb) {
		ret = -ENOMEM;
		goto out;
	}

	ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
				      skb->len);
	dev_kfree_skb(skb);
K
Kalle Valo 已提交
896
	if (ret < 0)
897
		goto out_sleep;
K
Kalle Valo 已提交
898 899 900 901 902 903

	ret = wl1251_cmd_trigger_scan_to(wl, 0);
	if (ret < 0)
		goto out_sleep;

	wl->scanning = true;
904

905 906
	ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
			      req->n_channels, WL1251_SCAN_NUM_PROBES);
K
Kalle Valo 已提交
907 908 909 910 911 912
	if (ret < 0) {
		wl->scanning = false;
		goto out_sleep;
	}

out_sleep:
913
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
914 915

out:
K
Kalle Valo 已提交
916 917 918 919 920
	mutex_unlock(&wl->mutex);

	return ret;
}

921
static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
K
Kalle Valo 已提交
922
{
923
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
924 925
	int ret;

926 927
	mutex_lock(&wl->mutex);

928
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
929 930
	if (ret < 0)
		goto out;
931

932
	ret = wl1251_acx_rts_threshold(wl, (u16) value);
K
Kalle Valo 已提交
933
	if (ret < 0)
934
		wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
K
Kalle Valo 已提交
935

936
	wl1251_ps_elp_sleep(wl);
937

K
Kalle Valo 已提交
938
out:
939 940
	mutex_unlock(&wl->mutex);

K
Kalle Valo 已提交
941 942 943
	return ret;
}

944
static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
945 946 947 948
				       struct ieee80211_vif *vif,
				       struct ieee80211_bss_conf *bss_conf,
				       u32 changed)
{
949
	struct wl1251 *wl = hw->priv;
950
	struct sk_buff *beacon, *skb;
K
Kalle Valo 已提交
951 952
	int ret;

953
	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
K
Kalle Valo 已提交
954 955 956

	mutex_lock(&wl->mutex);

957
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
958 959
	if (ret < 0)
		goto out;
960

K
Kalle Valo 已提交
961 962 963
	if (changed & BSS_CHANGED_BSSID) {
		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);

964 965 966 967 968 969 970
		skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
		if (!skb)
			goto out_sleep;

		ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA,
					      skb->data, skb->len);
		dev_kfree_skb(skb);
K
Kalle Valo 已提交
971
		if (ret < 0)
972
			goto out_sleep;
K
Kalle Valo 已提交
973

974 975 976 977
		ret = wl1251_build_qos_null_data(wl);
		if (ret < 0)
			goto out;

K
Kalle Valo 已提交
978 979 980 981 982 983 984 985
		if (wl->bss_type != BSS_TYPE_IBSS) {
			ret = wl1251_join(wl, wl->bss_type, wl->channel,
					  wl->beacon_int, wl->dtim_period);
			if (ret < 0)
				goto out_sleep;
		}
	}

K
Kalle Valo 已提交
986 987
	if (changed & BSS_CHANGED_ASSOC) {
		if (bss_conf->assoc) {
988
			wl->beacon_int = bss_conf->beacon_int;
K
Kalle Valo 已提交
989

990 991 992 993 994 995 996 997
			skb = ieee80211_pspoll_get(wl->hw, wl->vif);
			if (!skb)
				goto out_sleep;

			ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
						      skb->data,
						      skb->len);
			dev_kfree_skb(skb);
K
Kalle Valo 已提交
998
			if (ret < 0)
K
Kalle Valo 已提交
999
				goto out_sleep;
K
Kalle Valo 已提交
1000

1001
			ret = wl1251_acx_aid(wl, bss_conf->aid);
K
Kalle Valo 已提交
1002
			if (ret < 0)
K
Kalle Valo 已提交
1003
				goto out_sleep;
1004 1005 1006 1007
		} else {
			/* use defaults when not associated */
			wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
			wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
K
Kalle Valo 已提交
1008 1009 1010 1011
		}
	}
	if (changed & BSS_CHANGED_ERP_SLOT) {
		if (bss_conf->use_short_slot)
1012
			ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
K
Kalle Valo 已提交
1013
		else
1014
			ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
K
Kalle Valo 已提交
1015
		if (ret < 0) {
1016
			wl1251_warning("Set slot time failed %d", ret);
K
Kalle Valo 已提交
1017
			goto out_sleep;
K
Kalle Valo 已提交
1018 1019 1020 1021 1022
		}
	}

	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
		if (bss_conf->use_short_preamble)
1023
			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
K
Kalle Valo 已提交
1024
		else
1025
			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
K
Kalle Valo 已提交
1026 1027 1028 1029
	}

	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
		if (bss_conf->use_cts_prot)
1030
			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
K
Kalle Valo 已提交
1031
		else
1032
			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
K
Kalle Valo 已提交
1033
		if (ret < 0) {
1034
			wl1251_warning("Set ctsprotect failed %d", ret);
1035
			goto out_sleep;
K
Kalle Valo 已提交
1036 1037 1038 1039 1040
		}
	}

	if (changed & BSS_CHANGED_BEACON) {
		beacon = ieee80211_beacon_get(hw, vif);
1041
		ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
K
Kalle Valo 已提交
1042 1043 1044 1045
					      beacon->len);

		if (ret < 0) {
			dev_kfree_skb(beacon);
1046
			goto out_sleep;
K
Kalle Valo 已提交
1047 1048
		}

1049
		ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
K
Kalle Valo 已提交
1050 1051 1052 1053 1054
					      beacon->len);

		dev_kfree_skb(beacon);

		if (ret < 0)
1055
			goto out_sleep;
K
Kalle Valo 已提交
1056

K
Kalle Valo 已提交
1057 1058
		ret = wl1251_join(wl, wl->bss_type, wl->beacon_int,
				  wl->channel, wl->dtim_period);
K
Kalle Valo 已提交
1059 1060

		if (ret < 0)
1061
			goto out_sleep;
K
Kalle Valo 已提交
1062 1063
	}

K
Kalle Valo 已提交
1064
out_sleep:
1065
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
1066 1067

out:
K
Kalle Valo 已提交
1068 1069 1070 1071 1072
	mutex_unlock(&wl->mutex);
}


/* can't be const, mac80211 writes to this */
1073
static struct ieee80211_rate wl1251_rates[] = {
K
Kalle Valo 已提交
1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115
	{ .bitrate = 10,
	  .hw_value = 0x1,
	  .hw_value_short = 0x1, },
	{ .bitrate = 20,
	  .hw_value = 0x2,
	  .hw_value_short = 0x2,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 55,
	  .hw_value = 0x4,
	  .hw_value_short = 0x4,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 110,
	  .hw_value = 0x20,
	  .hw_value_short = 0x20,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 60,
	  .hw_value = 0x8,
	  .hw_value_short = 0x8, },
	{ .bitrate = 90,
	  .hw_value = 0x10,
	  .hw_value_short = 0x10, },
	{ .bitrate = 120,
	  .hw_value = 0x40,
	  .hw_value_short = 0x40, },
	{ .bitrate = 180,
	  .hw_value = 0x80,
	  .hw_value_short = 0x80, },
	{ .bitrate = 240,
	  .hw_value = 0x200,
	  .hw_value_short = 0x200, },
	{ .bitrate = 360,
	 .hw_value = 0x400,
	 .hw_value_short = 0x400, },
	{ .bitrate = 480,
	  .hw_value = 0x800,
	  .hw_value_short = 0x800, },
	{ .bitrate = 540,
	  .hw_value = 0x1000,
	  .hw_value_short = 0x1000, },
};

/* can't be const, mac80211 writes to this */
1116
static struct ieee80211_channel wl1251_channels[] = {
K
Kalle Valo 已提交
1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131
	{ .hw_value = 1, .center_freq = 2412},
	{ .hw_value = 2, .center_freq = 2417},
	{ .hw_value = 3, .center_freq = 2422},
	{ .hw_value = 4, .center_freq = 2427},
	{ .hw_value = 5, .center_freq = 2432},
	{ .hw_value = 6, .center_freq = 2437},
	{ .hw_value = 7, .center_freq = 2442},
	{ .hw_value = 8, .center_freq = 2447},
	{ .hw_value = 9, .center_freq = 2452},
	{ .hw_value = 10, .center_freq = 2457},
	{ .hw_value = 11, .center_freq = 2462},
	{ .hw_value = 12, .center_freq = 2467},
	{ .hw_value = 13, .center_freq = 2472},
};

1132 1133 1134
static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
			     const struct ieee80211_tx_queue_params *params)
{
K
Kalle Valo 已提交
1135
	enum wl1251_acx_ps_scheme ps_scheme;
1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146
	struct wl1251 *wl = hw->priv;
	int ret;

	mutex_lock(&wl->mutex);

	wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);

	ret = wl1251_ps_elp_wakeup(wl);
	if (ret < 0)
		goto out;

K
Kalle Valo 已提交
1147
	/* mac80211 uses units of 32 usec */
1148 1149
	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
				params->cw_min, params->cw_max,
K
Kalle Valo 已提交
1150
				params->aifs, params->txop * 32);
1151 1152 1153
	if (ret < 0)
		goto out_sleep;

K
Kalle Valo 已提交
1154 1155 1156 1157 1158
	if (params->uapsd)
		ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER;
	else
		ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY;

1159
	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
K
Kalle Valo 已提交
1160
				 CHANNEL_TYPE_EDCF,
K
Kalle Valo 已提交
1161
				 wl1251_tx_get_queue(queue), ps_scheme,
1162 1163 1164
				 WL1251_ACX_ACK_POLICY_LEGACY);
	if (ret < 0)
		goto out_sleep;
1165

1166
out_sleep:
1167 1168 1169 1170 1171 1172 1173 1174
	wl1251_ps_elp_sleep(wl);

out:
	mutex_unlock(&wl->mutex);

	return ret;
}

K
Kalle Valo 已提交
1175
/* can't be const, mac80211 writes to this */
1176 1177 1178 1179 1180
static struct ieee80211_supported_band wl1251_band_2ghz = {
	.channels = wl1251_channels,
	.n_channels = ARRAY_SIZE(wl1251_channels),
	.bitrates = wl1251_rates,
	.n_bitrates = ARRAY_SIZE(wl1251_rates),
K
Kalle Valo 已提交
1181 1182
};

1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194
static const struct ieee80211_ops wl1251_ops = {
	.start = wl1251_op_start,
	.stop = wl1251_op_stop,
	.add_interface = wl1251_op_add_interface,
	.remove_interface = wl1251_op_remove_interface,
	.config = wl1251_op_config,
	.configure_filter = wl1251_op_configure_filter,
	.tx = wl1251_op_tx,
	.set_key = wl1251_op_set_key,
	.hw_scan = wl1251_op_hw_scan,
	.bss_info_changed = wl1251_op_bss_info_changed,
	.set_rts_threshold = wl1251_op_set_rts_threshold,
1195
	.conf_tx = wl1251_op_conf_tx,
K
Kalle Valo 已提交
1196 1197
};

1198
static int wl1251_register_hw(struct wl1251 *wl)
K
Kalle Valo 已提交
1199 1200 1201 1202 1203 1204 1205 1206 1207 1208
{
	int ret;

	if (wl->mac80211_registered)
		return 0;

	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);

	ret = ieee80211_register_hw(wl->hw);
	if (ret < 0) {
1209
		wl1251_error("unable to register mac80211 hw: %d", ret);
K
Kalle Valo 已提交
1210 1211 1212 1213 1214
		return ret;
	}

	wl->mac80211_registered = true;

1215
	wl1251_notice("loaded");
K
Kalle Valo 已提交
1216 1217 1218 1219

	return 0;
}

1220
int wl1251_init_ieee80211(struct wl1251 *wl)
K
Kalle Valo 已提交
1221
{
1222 1223
	int ret;

K
Kalle Valo 已提交
1224 1225
	/* The tx descriptor buffer and the TKIP space */
	wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
1226
		+ WL1251_TKIP_IV_SPACE;
K
Kalle Valo 已提交
1227 1228 1229 1230 1231 1232

	/* unit us */
	/* FIXME: find a proper value */
	wl->hw->channel_change_time = 10000;

	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
K
Kalle Valo 已提交
1233
		IEEE80211_HW_NOISE_DBM |
1234
		IEEE80211_HW_SUPPORTS_PS |
K
Kalle Valo 已提交
1235 1236
		IEEE80211_HW_BEACON_FILTER |
		IEEE80211_HW_SUPPORTS_UAPSD;
K
Kalle Valo 已提交
1237 1238 1239

	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
	wl->hw->wiphy->max_scan_ssids = 1;
1240
	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
K
Kalle Valo 已提交
1241

K
Kalle Valo 已提交
1242 1243
	wl->hw->queues = 4;

1244 1245 1246
	ret = wl1251_register_hw(wl);
	if (ret)
		goto out;
K
Kalle Valo 已提交
1247

1248 1249
	wl1251_debugfs_init(wl);
	wl1251_notice("initialized");
K
Kalle Valo 已提交
1250

1251 1252 1253 1254 1255
	ret = 0;

out:
	return ret;
}
1256
EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
1257

1258
struct ieee80211_hw *wl1251_alloc_hw(void)
K
Kalle Valo 已提交
1259 1260
{
	struct ieee80211_hw *hw;
1261
	struct wl1251 *wl;
1262
	int i;
K
Kalle Valo 已提交
1263 1264
	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};

1265
	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
K
Kalle Valo 已提交
1266
	if (!hw) {
1267
		wl1251_error("could not alloc ieee80211_hw");
1268
		return ERR_PTR(-ENOMEM);
K
Kalle Valo 已提交
1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279
	}

	wl = hw->priv;
	memset(wl, 0, sizeof(*wl));

	wl->hw = hw;

	wl->data_in_count = 0;

	skb_queue_head_init(&wl->tx_queue);

1280
	INIT_WORK(&wl->filter_work, wl1251_filter_work);
1281
	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
1282
	wl->channel = WL1251_DEFAULT_CHANNEL;
K
Kalle Valo 已提交
1283 1284 1285 1286 1287 1288 1289
	wl->scanning = false;
	wl->default_key = 0;
	wl->listen_int = 1;
	wl->rx_counter = 0;
	wl->rx_handled = 0;
	wl->rx_current_buffer = 0;
	wl->rx_last_id = 0;
1290 1291
	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
K
Kalle Valo 已提交
1292 1293 1294 1295
	wl->elp = false;
	wl->psm = 0;
	wl->psm_requested = false;
	wl->tx_queue_stopped = false;
1296
	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
1297 1298
	wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
	wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1299
	wl->vif = NULL;
K
Kalle Valo 已提交
1300 1301 1302 1303 1304 1305

	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
		wl->tx_frames[i] = NULL;

	wl->next_tx_complete = 0;

K
Kalle Valo 已提交
1306 1307 1308
	INIT_WORK(&wl->irq_work, wl1251_irq_work);
	INIT_WORK(&wl->tx_work, wl1251_tx_work);

K
Kalle Valo 已提交
1309 1310 1311 1312 1313 1314 1315
	/*
	 * In case our MAC address is not correctly set,
	 * we use a random but Nokia MAC.
	 */
	memcpy(wl->mac_addr, nokia_oui, 3);
	get_random_bytes(wl->mac_addr + 3, 3);

1316
	wl->state = WL1251_STATE_OFF;
K
Kalle Valo 已提交
1317 1318 1319 1320 1321
	mutex_init(&wl->mutex);

	wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
	wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;

K
Kalle Valo 已提交
1322 1323
	wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
	if (!wl->rx_descriptor) {
1324
		wl1251_error("could not allocate memory for rx descriptor");
1325 1326
		ieee80211_free_hw(hw);
		return ERR_PTR(-ENOMEM);
K
Kalle Valo 已提交
1327 1328
	}

1329
	return hw;
K
Kalle Valo 已提交
1330
}
1331
EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
K
Kalle Valo 已提交
1332

1333
int wl1251_free_hw(struct wl1251 *wl)
K
Kalle Valo 已提交
1334 1335 1336
{
	ieee80211_unregister_hw(wl->hw);

1337
	wl1251_debugfs_exit(wl);
K
Kalle Valo 已提交
1338 1339 1340

	kfree(wl->target_mem_map);
	kfree(wl->data_path);
1341
	vfree(wl->fw);
K
Kalle Valo 已提交
1342 1343 1344
	wl->fw = NULL;
	kfree(wl->nvs);
	wl->nvs = NULL;
K
Kalle Valo 已提交
1345 1346 1347 1348

	kfree(wl->rx_descriptor);
	wl->rx_descriptor = NULL;

K
Kalle Valo 已提交
1349 1350 1351 1352
	ieee80211_free_hw(wl->hw);

	return 0;
}
1353 1354 1355 1356
EXPORT_SYMBOL_GPL(wl1251_free_hw);

MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
MODULE_LICENSE("GPL");
1357
MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
K
Kalle Valo 已提交
1358
MODULE_ALIAS("spi:wl1251");
B
Ben Hutchings 已提交
1359
MODULE_FIRMWARE(WL1251_FW_NAME);