wl1251_main.c 29.1 KB
Newer Older
K
Kalle Valo 已提交
1
/*
2
 * This file is part of wl1251
K
Kalle Valo 已提交
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
 *
 * Copyright (C) 2008-2009 Nokia Corporation
 *
 * Contact: Kalle Valo <kalle.valo@nokia.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/crc32.h>
#include <linux/etherdevice.h>
31
#include <linux/vmalloc.h>
K
Kalle Valo 已提交
32

K
Kalle Valo 已提交
33
#include "wl1251.h"
K
Kalle Valo 已提交
34
#include "wl12xx_80211.h"
35
#include "wl1251_reg.h"
36
#include "wl1251_io.h"
37
#include "wl1251_cmd.h"
38
#include "wl1251_event.h"
39
#include "wl1251_tx.h"
40 41 42 43
#include "wl1251_rx.h"
#include "wl1251_ps.h"
#include "wl1251_init.h"
#include "wl1251_debugfs.h"
K
Kalle Valo 已提交
44
#include "wl1251_boot.h"
K
Kalle Valo 已提交
45

46
void wl1251_enable_interrupts(struct wl1251 *wl)
K
Kalle Valo 已提交
47
{
48 49 50 51 52 53
	wl->if_ops->enable_irq(wl);
}

void wl1251_disable_interrupts(struct wl1251 *wl)
{
	wl->if_ops->disable_irq(wl);
K
Kalle Valo 已提交
54 55
}

56
static void wl1251_power_off(struct wl1251 *wl)
K
Kalle Valo 已提交
57 58 59 60
{
	wl->set_power(false);
}

61
static void wl1251_power_on(struct wl1251 *wl)
K
Kalle Valo 已提交
62 63 64 65
{
	wl->set_power(true);
}

66
static int wl1251_fetch_firmware(struct wl1251 *wl)
K
Kalle Valo 已提交
67 68
{
	const struct firmware *fw;
69
	struct device *dev = wiphy_dev(wl->hw->wiphy);
K
Kalle Valo 已提交
70 71
	int ret;

K
Kalle Valo 已提交
72
	ret = request_firmware(&fw, WL1251_FW_NAME, dev);
K
Kalle Valo 已提交
73 74

	if (ret < 0) {
75
		wl1251_error("could not get firmware: %d", ret);
K
Kalle Valo 已提交
76 77 78 79
		return ret;
	}

	if (fw->size % 4) {
80
		wl1251_error("firmware size is not multiple of 32 bits: %zu",
K
Kalle Valo 已提交
81 82 83 84 85 86
			     fw->size);
		ret = -EILSEQ;
		goto out;
	}

	wl->fw_len = fw->size;
87
	wl->fw = vmalloc(wl->fw_len);
K
Kalle Valo 已提交
88 89

	if (!wl->fw) {
90
		wl1251_error("could not allocate memory for the firmware");
K
Kalle Valo 已提交
91 92 93 94 95 96 97 98 99 100 101 102 103 104
		ret = -ENOMEM;
		goto out;
	}

	memcpy(wl->fw, fw->data, wl->fw_len);

	ret = 0;

out:
	release_firmware(fw);

	return ret;
}

105
static int wl1251_fetch_nvs(struct wl1251 *wl)
K
Kalle Valo 已提交
106 107
{
	const struct firmware *fw;
108
	struct device *dev = wiphy_dev(wl->hw->wiphy);
K
Kalle Valo 已提交
109 110
	int ret;

K
Kalle Valo 已提交
111
	ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
K
Kalle Valo 已提交
112 113

	if (ret < 0) {
114
		wl1251_error("could not get nvs file: %d", ret);
K
Kalle Valo 已提交
115 116 117 118
		return ret;
	}

	if (fw->size % 4) {
119
		wl1251_error("nvs size is not multiple of 32 bits: %zu",
K
Kalle Valo 已提交
120 121 122 123 124 125 126 127 128
			     fw->size);
		ret = -EILSEQ;
		goto out;
	}

	wl->nvs_len = fw->size;
	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);

	if (!wl->nvs) {
129
		wl1251_error("could not allocate memory for the nvs file");
K
Kalle Valo 已提交
130 131 132 133 134 135 136 137 138 139 140 141 142 143
		ret = -ENOMEM;
		goto out;
	}

	memcpy(wl->nvs, fw->data, wl->nvs_len);

	ret = 0;

out:
	release_firmware(fw);

	return ret;
}

144
static void wl1251_fw_wakeup(struct wl1251 *wl)
K
Kalle Valo 已提交
145 146 147 148
{
	u32 elp_reg;

	elp_reg = ELPCTRL_WAKE_UP;
149 150
	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
	elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
K
Kalle Valo 已提交
151

K
Kalle Valo 已提交
152
	if (!(elp_reg & ELPCTRL_WLAN_READY))
153
		wl1251_warning("WLAN not ready");
K
Kalle Valo 已提交
154 155
}

156
static int wl1251_chip_wakeup(struct wl1251 *wl)
K
Kalle Valo 已提交
157 158 159
{
	int ret = 0;

160
	wl1251_power_on(wl);
K
Kalle Valo 已提交
161
	msleep(WL1251_POWER_ON_SLEEP);
162
	wl->if_ops->reset(wl);
K
Kalle Valo 已提交
163 164 165

	/* We don't need a real memory partition here, because we only want
	 * to use the registers at this point. */
166
	wl1251_set_partition(wl,
K
Kalle Valo 已提交
167 168 169 170 171 172
			     0x00000000,
			     0x00000000,
			     REGISTERS_BASE,
			     REGISTERS_DOWN_SIZE);

	/* ELP module wake up */
173
	wl1251_fw_wakeup(wl);
K
Kalle Valo 已提交
174 175 176 177

	/* whal_FwCtrl_BootSm() */

	/* 0. read chip id from CHIP_ID */
K
Kalle Valo 已提交
178
	wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
K
Kalle Valo 已提交
179 180 181

	/* 1. check if chip id is valid */

K
Kalle Valo 已提交
182
	switch (wl->chip_id) {
K
Kalle Valo 已提交
183
	case CHIP_ID_1251_PG12:
184
		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
K
Kalle Valo 已提交
185
			     wl->chip_id);
K
Kalle Valo 已提交
186 187
		break;
	case CHIP_ID_1251_PG11:
188 189 190
		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
			     wl->chip_id);
		break;
J
John W. Linville 已提交
191
	case CHIP_ID_1251_PG10:
K
Kalle Valo 已提交
192
	default:
K
Kalle Valo 已提交
193
		wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
K
Kalle Valo 已提交
194 195 196 197 198
		ret = -ENODEV;
		goto out;
	}

	if (wl->fw == NULL) {
199
		ret = wl1251_fetch_firmware(wl);
K
Kalle Valo 已提交
200 201 202 203 204 205
		if (ret < 0)
			goto out;
	}

	/* No NVS from netlink, try to get it from the filesystem */
	if (wl->nvs == NULL) {
206
		ret = wl1251_fetch_nvs(wl);
K
Kalle Valo 已提交
207 208 209 210 211 212 213 214
		if (ret < 0)
			goto out;
	}

out:
	return ret;
}

J
Janne Ylalehto 已提交
215
#define WL1251_IRQ_LOOP_COUNT 10
K
Kalle Valo 已提交
216 217
static void wl1251_irq_work(struct work_struct *work)
{
J
Janne Ylalehto 已提交
218
	u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
K
Kalle Valo 已提交
219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238
	struct wl1251 *wl =
		container_of(work, struct wl1251, irq_work);
	int ret;

	mutex_lock(&wl->mutex);

	wl1251_debug(DEBUG_IRQ, "IRQ work");

	if (wl->state == WL1251_STATE_OFF)
		goto out;

	ret = wl1251_ps_elp_wakeup(wl);
	if (ret < 0)
		goto out;

	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);

	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
	wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);

J
Janne Ylalehto 已提交
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272
	do {
		if (wl->data_path) {
			wl->rx_counter = wl1251_mem_read32(
				wl, wl->data_path->rx_control_addr);

			/* We handle a frmware bug here */
			switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
			case 0:
				wl1251_debug(DEBUG_IRQ,
					     "RX: FW and host in sync");
				intr &= ~WL1251_ACX_INTR_RX0_DATA;
				intr &= ~WL1251_ACX_INTR_RX1_DATA;
				break;
			case 1:
				wl1251_debug(DEBUG_IRQ, "RX: FW +1");
				intr |= WL1251_ACX_INTR_RX0_DATA;
				intr &= ~WL1251_ACX_INTR_RX1_DATA;
				break;
			case 2:
				wl1251_debug(DEBUG_IRQ, "RX: FW +2");
				intr |= WL1251_ACX_INTR_RX0_DATA;
				intr |= WL1251_ACX_INTR_RX1_DATA;
				break;
			default:
				wl1251_warning(
					"RX: FW and host out of sync: %d",
					wl->rx_counter - wl->rx_handled);
				break;
			}

			wl->rx_handled = wl->rx_counter;

			wl1251_debug(DEBUG_IRQ, "RX counter: %d",
				     wl->rx_counter);
K
Kalle Valo 已提交
273 274
		}

J
Janne Ylalehto 已提交
275
		intr &= wl->intr_mask;
K
Kalle Valo 已提交
276

J
Janne Ylalehto 已提交
277 278 279 280
		if (intr == 0) {
			wl1251_debug(DEBUG_IRQ, "INTR is 0");
			goto out_sleep;
		}
K
Kalle Valo 已提交
281

J
Janne Ylalehto 已提交
282 283 284 285
		if (intr & WL1251_ACX_INTR_RX0_DATA) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
			wl1251_rx(wl);
		}
K
Kalle Valo 已提交
286

J
Janne Ylalehto 已提交
287 288 289 290
		if (intr & WL1251_ACX_INTR_RX1_DATA) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
			wl1251_rx(wl);
		}
K
Kalle Valo 已提交
291

J
Janne Ylalehto 已提交
292 293 294 295
		if (intr & WL1251_ACX_INTR_TX_RESULT) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
			wl1251_tx_complete(wl);
		}
K
Kalle Valo 已提交
296

J
Janne Ylalehto 已提交
297 298 299 300 301 302 303 304 305
		if (intr & (WL1251_ACX_INTR_EVENT_A |
			    WL1251_ACX_INTR_EVENT_B)) {
			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)",
				     intr);
			if (intr & WL1251_ACX_INTR_EVENT_A)
				wl1251_event_handle(wl, 0);
			else
				wl1251_event_handle(wl, 1);
		}
K
Kalle Valo 已提交
306

J
Janne Ylalehto 已提交
307 308 309
		if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
			wl1251_debug(DEBUG_IRQ,
				     "WL1251_ACX_INTR_INIT_COMPLETE");
K
Kalle Valo 已提交
310

311 312
		if (--ctr == 0)
			break;
K
Kalle Valo 已提交
313

314 315
		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
	} while (intr);
K
Kalle Valo 已提交
316 317

out_sleep:
J
Janne Ylalehto 已提交
318
	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
K
Kalle Valo 已提交
319 320 321 322 323 324
	wl1251_ps_elp_sleep(wl);

out:
	mutex_unlock(&wl->mutex);
}

K
Kalle Valo 已提交
325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352
static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
		       u16 beacon_interval, u8 dtim_period)
{
	int ret;

	ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
				     DEFAULT_HW_GEN_MODULATION_TYPE,
				     wl->tx_mgmt_frm_rate,
				     wl->tx_mgmt_frm_mod);
	if (ret < 0)
		goto out;


	ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
			      dtim_period);
	if (ret < 0)
		goto out;

	/*
	 * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
	 * locking we just sleep instead, for now
	 */
	msleep(10);

out:
	return ret;
}

353
static void wl1251_filter_work(struct work_struct *work)
K
Kalle Valo 已提交
354
{
355 356
	struct wl1251 *wl =
		container_of(work, struct wl1251, filter_work);
K
Kalle Valo 已提交
357 358 359 360
	int ret;

	mutex_lock(&wl->mutex);

361
	if (wl->state == WL1251_STATE_OFF)
K
Kalle Valo 已提交
362 363
		goto out;

364
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
365 366
	if (ret < 0)
		goto out;
367

K
Kalle Valo 已提交
368 369
	ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
			  wl->dtim_period);
K
Kalle Valo 已提交
370
	if (ret < 0)
K
Kalle Valo 已提交
371
		goto out_sleep;
K
Kalle Valo 已提交
372

K
Kalle Valo 已提交
373
out_sleep:
374
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
375 376

out:
K
Kalle Valo 已提交
377 378 379
	mutex_unlock(&wl->mutex);
}

380
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
K
Kalle Valo 已提交
381
{
382
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
383 384 385

	skb_queue_tail(&wl->tx_queue, skb);

386 387 388 389 390
	/*
	 * The chip specific setup must run before the first TX packet -
	 * before that, the tx_work will not be initialized!
	 */

391
	ieee80211_queue_work(wl->hw, &wl->tx_work);
K
Kalle Valo 已提交
392 393 394 395 396

	/*
	 * The workqueue is slow to process the tx_queue and we need stop
	 * the queue here, otherwise the queue will get too long.
	 */
397
	if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
398
		wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
K
Kalle Valo 已提交
399 400 401 402 403 404 405 406 407 408 409 410 411
		ieee80211_stop_queues(wl->hw);

		/*
		 * FIXME: this is racy, the variable is not properly
		 * protected. Maybe fix this by removing the stupid
		 * variable altogether and checking the real queue state?
		 */
		wl->tx_queue_stopped = true;
	}

	return NETDEV_TX_OK;
}

412
static int wl1251_op_start(struct ieee80211_hw *hw)
K
Kalle Valo 已提交
413
{
414
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
415 416
	int ret = 0;

417
	wl1251_debug(DEBUG_MAC80211, "mac80211 start");
K
Kalle Valo 已提交
418 419 420

	mutex_lock(&wl->mutex);

421 422
	if (wl->state != WL1251_STATE_OFF) {
		wl1251_error("cannot start because not in off state: %d",
K
Kalle Valo 已提交
423 424 425 426 427
			     wl->state);
		ret = -EBUSY;
		goto out;
	}

428
	ret = wl1251_chip_wakeup(wl);
K
Kalle Valo 已提交
429
	if (ret < 0)
430
		goto out;
K
Kalle Valo 已提交
431

K
Kalle Valo 已提交
432
	ret = wl1251_boot(wl);
K
Kalle Valo 已提交
433 434 435
	if (ret < 0)
		goto out;

K
Kalle Valo 已提交
436
	ret = wl1251_hw_init(wl);
K
Kalle Valo 已提交
437 438 439
	if (ret < 0)
		goto out;

440
	ret = wl1251_acx_station_id(wl);
K
Kalle Valo 已提交
441 442 443
	if (ret < 0)
		goto out;

444
	wl->state = WL1251_STATE_ON;
K
Kalle Valo 已提交
445

K
Kalle Valo 已提交
446
	wl1251_info("firmware booted (%s)", wl->fw_ver);
K
Kalle Valo 已提交
447 448 449

out:
	if (ret < 0)
450
		wl1251_power_off(wl);
K
Kalle Valo 已提交
451 452 453 454 455 456

	mutex_unlock(&wl->mutex);

	return ret;
}

457
static void wl1251_op_stop(struct ieee80211_hw *hw)
K
Kalle Valo 已提交
458
{
459
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
460

461
	wl1251_info("down");
K
Kalle Valo 已提交
462

463
	wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
K
Kalle Valo 已提交
464 465 466

	mutex_lock(&wl->mutex);

467
	WARN_ON(wl->state != WL1251_STATE_ON);
K
Kalle Valo 已提交
468 469 470 471 472 473 474 475

	if (wl->scanning) {
		mutex_unlock(&wl->mutex);
		ieee80211_scan_completed(wl->hw, true);
		mutex_lock(&wl->mutex);
		wl->scanning = false;
	}

476
	wl->state = WL1251_STATE_OFF;
K
Kalle Valo 已提交
477

478
	wl1251_disable_interrupts(wl);
K
Kalle Valo 已提交
479 480 481 482 483 484 485 486 487 488

	mutex_unlock(&wl->mutex);

	cancel_work_sync(&wl->irq_work);
	cancel_work_sync(&wl->tx_work);
	cancel_work_sync(&wl->filter_work);

	mutex_lock(&wl->mutex);

	/* let's notify MAC80211 about the remaining pending TX frames */
K
Kalle Valo 已提交
489
	wl1251_tx_flush(wl);
490
	wl1251_power_off(wl);
K
Kalle Valo 已提交
491 492 493 494 495 496 497 498 499 500 501 502 503 504

	memset(wl->bssid, 0, ETH_ALEN);
	wl->listen_int = 1;
	wl->bss_type = MAX_BSS_TYPE;

	wl->data_in_count = 0;
	wl->rx_counter = 0;
	wl->rx_handled = 0;
	wl->rx_current_buffer = 0;
	wl->rx_last_id = 0;
	wl->next_tx_complete = 0;
	wl->elp = false;
	wl->psm = 0;
	wl->tx_queue_stopped = false;
505
	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
506
	wl->channel = WL1251_DEFAULT_CHANNEL;
K
Kalle Valo 已提交
507

508
	wl1251_debugfs_reset(wl);
K
Kalle Valo 已提交
509 510 511 512

	mutex_unlock(&wl->mutex);
}

513
static int wl1251_op_add_interface(struct ieee80211_hw *hw,
514
				   struct ieee80211_vif *vif)
K
Kalle Valo 已提交
515
{
516
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
517 518
	int ret = 0;

J
Johannes Berg 已提交
519
	wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
520
		     vif->type, vif->addr);
K
Kalle Valo 已提交
521 522

	mutex_lock(&wl->mutex);
523 524 525 526 527
	if (wl->vif) {
		ret = -EBUSY;
		goto out;
	}

528
	wl->vif = vif;
K
Kalle Valo 已提交
529

530
	switch (vif->type) {
K
Kalle Valo 已提交
531 532 533 534 535 536 537 538 539 540 541
	case NL80211_IFTYPE_STATION:
		wl->bss_type = BSS_TYPE_STA_BSS;
		break;
	case NL80211_IFTYPE_ADHOC:
		wl->bss_type = BSS_TYPE_IBSS;
		break;
	default:
		ret = -EOPNOTSUPP;
		goto out;
	}

542 543
	if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
		memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
K
Kalle Valo 已提交
544
		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
545
		ret = wl1251_acx_station_id(wl);
K
Kalle Valo 已提交
546 547 548 549 550 551 552 553 554
		if (ret < 0)
			goto out;
	}

out:
	mutex_unlock(&wl->mutex);
	return ret;
}

555
static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
556
					 struct ieee80211_vif *vif)
K
Kalle Valo 已提交
557
{
558 559 560
	struct wl1251 *wl = hw->priv;

	mutex_lock(&wl->mutex);
561
	wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
562 563
	wl->vif = NULL;
	mutex_unlock(&wl->mutex);
K
Kalle Valo 已提交
564 565
}

566
static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
K
Kalle Valo 已提交
567
{
568
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
569 570 571 572 573
	struct ieee80211_conf *conf = &hw->conf;
	int channel, ret = 0;

	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);

574
	wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
K
Kalle Valo 已提交
575 576 577 578 579 580
		     channel,
		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
		     conf->power_level);

	mutex_lock(&wl->mutex);

581
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
582 583
	if (ret < 0)
		goto out;
584

K
Kalle Valo 已提交
585
	if (channel != wl->channel) {
586 587
		wl->channel = channel;

K
Kalle Valo 已提交
588 589
		ret = wl1251_join(wl, wl->bss_type, wl->channel,
				  wl->beacon_int, wl->dtim_period);
K
Kalle Valo 已提交
590
		if (ret < 0)
K
Kalle Valo 已提交
591
			goto out_sleep;
K
Kalle Valo 已提交
592 593 594
	}

	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
595
		wl1251_debug(DEBUG_PSM, "psm enabled");
K
Kalle Valo 已提交
596 597 598 599 600 601 602 603

		wl->psm_requested = true;

		/*
		 * We enter PSM only if we're already associated.
		 * If we're not, we'll enter it when joining an SSID,
		 * through the bss_info_changed() hook.
		 */
604
		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
605 606
		if (ret < 0)
			goto out_sleep;
K
Kalle Valo 已提交
607 608
	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
		   wl->psm_requested) {
609
		wl1251_debug(DEBUG_PSM, "psm disabled");
K
Kalle Valo 已提交
610 611 612

		wl->psm_requested = false;

613
		if (wl->psm) {
614
			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
615 616 617
			if (ret < 0)
				goto out_sleep;
		}
K
Kalle Valo 已提交
618 619 620
	}

	if (conf->power_level != wl->power_level) {
621
		ret = wl1251_acx_tx_power(wl, conf->power_level);
K
Kalle Valo 已提交
622
		if (ret < 0)
623
			goto out_sleep;
K
Kalle Valo 已提交
624 625 626 627

		wl->power_level = conf->power_level;
	}

K
Kalle Valo 已提交
628
out_sleep:
629
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
630 631

out:
K
Kalle Valo 已提交
632
	mutex_unlock(&wl->mutex);
K
Kalle Valo 已提交
633

K
Kalle Valo 已提交
634 635 636
	return ret;
}

637
#define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
K
Kalle Valo 已提交
638 639 640 641 642 643
				  FIF_ALLMULTI | \
				  FIF_FCSFAIL | \
				  FIF_BCN_PRBRESP_PROMISC | \
				  FIF_CONTROL | \
				  FIF_OTHER_BSS)

644
static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
645
				       unsigned int changed,
646
				       unsigned int *total,u64 multicast)
K
Kalle Valo 已提交
647
{
648
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
649

650
	wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
K
Kalle Valo 已提交
651

652 653
	*total &= WL1251_SUPPORTED_FILTERS;
	changed &= WL1251_SUPPORTED_FILTERS;
K
Kalle Valo 已提交
654 655 656 657 658 659 660

	if (changed == 0)
		/* no filters which we support changed */
		return;

	/* FIXME: wl->rx_config and wl->rx_filter are not protected */

661 662
	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
K
Kalle Valo 已提交
663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693

	if (*total & FIF_PROMISC_IN_BSS) {
		wl->rx_config |= CFG_BSSID_FILTER_EN;
		wl->rx_config |= CFG_RX_ALL_GOOD;
	}
	if (*total & FIF_ALLMULTI)
		/*
		 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
		 * all multicast frames
		 */
		wl->rx_config &= ~CFG_MC_FILTER_EN;
	if (*total & FIF_FCSFAIL)
		wl->rx_filter |= CFG_RX_FCS_ERROR;
	if (*total & FIF_BCN_PRBRESP_PROMISC) {
		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
		wl->rx_config &= ~CFG_SSID_FILTER_EN;
	}
	if (*total & FIF_CONTROL)
		wl->rx_filter |= CFG_RX_CTL_EN;
	if (*total & FIF_OTHER_BSS)
		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;

	/*
	 * FIXME: workqueues need to be properly cancelled on stop(), for
	 * now let's just disable changing the filter settings. They will
	 * be updated any on config().
	 */
	/* schedule_work(&wl->filter_work); */
}

/* HW encryption */
694 695
static int wl1251_set_key_type(struct wl1251 *wl,
			       struct wl1251_cmd_set_keys *key,
K
Kalle Valo 已提交
696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724
			       enum set_key_cmd cmd,
			       struct ieee80211_key_conf *mac80211_key,
			       const u8 *addr)
{
	switch (mac80211_key->alg) {
	case ALG_WEP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_WEP_DEFAULT;
		else
			key->key_type = KEY_WEP_ADDR;

		mac80211_key->hw_key_idx = mac80211_key->keyidx;
		break;
	case ALG_TKIP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_TKIP_MIC_GROUP;
		else
			key->key_type = KEY_TKIP_MIC_PAIRWISE;

		mac80211_key->hw_key_idx = mac80211_key->keyidx;
		break;
	case ALG_CCMP:
		if (is_broadcast_ether_addr(addr))
			key->key_type = KEY_AES_GROUP;
		else
			key->key_type = KEY_AES_PAIRWISE;
		mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
		break;
	default:
725
		wl1251_error("Unknown key algo 0x%x", mac80211_key->alg);
K
Kalle Valo 已提交
726 727 728 729 730 731
		return -EOPNOTSUPP;
	}

	return 0;
}

732
static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
K
Kalle Valo 已提交
733 734 735 736
			     struct ieee80211_vif *vif,
			     struct ieee80211_sta *sta,
			     struct ieee80211_key_conf *key)
{
737 738
	struct wl1251 *wl = hw->priv;
	struct wl1251_cmd_set_keys *wl_cmd;
K
Kalle Valo 已提交
739 740 741 742 743 744
	const u8 *addr;
	int ret;

	static const u8 bcast_addr[ETH_ALEN] =
		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };

745
	wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
K
Kalle Valo 已提交
746

747 748 749 750 751
	wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
	if (!wl_cmd) {
		ret = -ENOMEM;
		goto out;
	}
K
Kalle Valo 已提交
752 753 754

	addr = sta ? sta->addr : bcast_addr;

755 756 757
	wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
	wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
	wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
K
Kalle Valo 已提交
758
		     key->alg, key->keyidx, key->keylen, key->flags);
759
	wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
K
Kalle Valo 已提交
760

761 762 763 764 765 766
	if (is_zero_ether_addr(addr)) {
		/* We dont support TX only encryption */
		ret = -EOPNOTSUPP;
		goto out;
	}

K
Kalle Valo 已提交
767 768
	mutex_lock(&wl->mutex);

769
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
770 771
	if (ret < 0)
		goto out_unlock;
772

K
Kalle Valo 已提交
773 774
	switch (cmd) {
	case SET_KEY:
775
		wl_cmd->key_action = KEY_ADD_OR_REPLACE;
K
Kalle Valo 已提交
776 777
		break;
	case DISABLE_KEY:
778
		wl_cmd->key_action = KEY_REMOVE;
K
Kalle Valo 已提交
779 780
		break;
	default:
781
		wl1251_error("Unsupported key cmd 0x%x", cmd);
K
Kalle Valo 已提交
782 783 784
		break;
	}

785
	ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
K
Kalle Valo 已提交
786
	if (ret < 0) {
787
		wl1251_error("Set KEY type failed");
K
Kalle Valo 已提交
788
		goto out_sleep;
K
Kalle Valo 已提交
789 790
	}

791 792
	if (wl_cmd->key_type != KEY_WEP_DEFAULT)
		memcpy(wl_cmd->addr, addr, ETH_ALEN);
K
Kalle Valo 已提交
793

794 795
	if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
	    (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
K
Kalle Valo 已提交
796 797 798 799 800 801
		/*
		 * We get the key in the following form:
		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
		 * but the target is expecting:
		 * TKIP - RX MIC - TX MIC
		 */
802 803 804
		memcpy(wl_cmd->key, key->key, 16);
		memcpy(wl_cmd->key + 16, key->key + 24, 8);
		memcpy(wl_cmd->key + 24, key->key + 16, 8);
K
Kalle Valo 已提交
805 806

	} else {
807
		memcpy(wl_cmd->key, key->key, key->keylen);
K
Kalle Valo 已提交
808
	}
809
	wl_cmd->key_size = key->keylen;
K
Kalle Valo 已提交
810

811 812
	wl_cmd->id = key->keyidx;
	wl_cmd->ssid_profile = 0;
K
Kalle Valo 已提交
813

814
	wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
K
Kalle Valo 已提交
815

816
	ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
817
	if (ret < 0) {
818
		wl1251_warning("could not set keys");
K
Kalle Valo 已提交
819
		goto out_sleep;
K
Kalle Valo 已提交
820 821
	}

K
Kalle Valo 已提交
822
out_sleep:
823
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
824 825

out_unlock:
K
Kalle Valo 已提交
826
	mutex_unlock(&wl->mutex);
827 828 829 830

out:
	kfree(wl_cmd);

K
Kalle Valo 已提交
831 832 833
	return ret;
}

834
static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
835 836
			     struct cfg80211_scan_request *req)
{
837
	struct wl1251 *wl = hw->priv;
838
	struct sk_buff *skb;
K
Kalle Valo 已提交
839
	size_t ssid_len = 0;
K
Kalle Valo 已提交
840 841
	u8 *ssid = NULL;
	int ret;
K
Kalle Valo 已提交
842

843
	wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
K
Kalle Valo 已提交
844 845 846 847 848 849 850

	if (req->n_ssids) {
		ssid = req->ssids[0].ssid;
		ssid_len = req->ssids[0].ssid_len;
	}

	mutex_lock(&wl->mutex);
K
Kalle Valo 已提交
851

K
Kalle Valo 已提交
852 853 854 855 856 857
	if (wl->scanning) {
		wl1251_debug(DEBUG_SCAN, "scan already in progress");
		ret = -EINVAL;
		goto out;
	}

858
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
859 860
	if (ret < 0)
		goto out;
861

862 863 864 865 866 867 868 869 870 871
	skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
				     req->ie, req->ie_len);
	if (!skb) {
		ret = -ENOMEM;
		goto out;
	}

	ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
				      skb->len);
	dev_kfree_skb(skb);
K
Kalle Valo 已提交
872
	if (ret < 0)
873
		goto out_sleep;
K
Kalle Valo 已提交
874 875 876 877 878 879

	ret = wl1251_cmd_trigger_scan_to(wl, 0);
	if (ret < 0)
		goto out_sleep;

	wl->scanning = true;
880

881 882
	ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
			      req->n_channels, WL1251_SCAN_NUM_PROBES);
K
Kalle Valo 已提交
883 884 885 886 887 888
	if (ret < 0) {
		wl->scanning = false;
		goto out_sleep;
	}

out_sleep:
889
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
890 891

out:
K
Kalle Valo 已提交
892 893 894 895 896
	mutex_unlock(&wl->mutex);

	return ret;
}

897
static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
K
Kalle Valo 已提交
898
{
899
	struct wl1251 *wl = hw->priv;
K
Kalle Valo 已提交
900 901
	int ret;

902 903
	mutex_lock(&wl->mutex);

904
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
905 906
	if (ret < 0)
		goto out;
907

908
	ret = wl1251_acx_rts_threshold(wl, (u16) value);
K
Kalle Valo 已提交
909
	if (ret < 0)
910
		wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
K
Kalle Valo 已提交
911

912
	wl1251_ps_elp_sleep(wl);
913

K
Kalle Valo 已提交
914
out:
915 916
	mutex_unlock(&wl->mutex);

K
Kalle Valo 已提交
917 918 919
	return ret;
}

920
static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
K
Kalle Valo 已提交
921 922 923 924
				       struct ieee80211_vif *vif,
				       struct ieee80211_bss_conf *bss_conf,
				       u32 changed)
{
925 926
	enum wl1251_cmd_ps_mode mode;
	struct wl1251 *wl = hw->priv;
927
	struct sk_buff *beacon, *skb;
K
Kalle Valo 已提交
928 929
	int ret;

930
	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
K
Kalle Valo 已提交
931 932 933

	mutex_lock(&wl->mutex);

934
	ret = wl1251_ps_elp_wakeup(wl);
K
Kalle Valo 已提交
935 936
	if (ret < 0)
		goto out;
937

K
Kalle Valo 已提交
938 939 940
	if (changed & BSS_CHANGED_BSSID) {
		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);

941 942 943 944 945 946 947
		skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
		if (!skb)
			goto out_sleep;

		ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA,
					      skb->data, skb->len);
		dev_kfree_skb(skb);
K
Kalle Valo 已提交
948 949 950 951 952 953 954 955 956 957 958
		if (ret < 0)
			goto out;

		if (wl->bss_type != BSS_TYPE_IBSS) {
			ret = wl1251_join(wl, wl->bss_type, wl->channel,
					  wl->beacon_int, wl->dtim_period);
			if (ret < 0)
				goto out_sleep;
		}
	}

K
Kalle Valo 已提交
959 960
	if (changed & BSS_CHANGED_ASSOC) {
		if (bss_conf->assoc) {
961 962 963
			wl->beacon_int = bss_conf->beacon_int;
			wl->dtim_period = bss_conf->dtim_period;

964 965
			ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
							  wl->dtim_period);
K
Kalle Valo 已提交
966 967
			wl->aid = bss_conf->aid;

968 969 970 971 972 973 974 975
			skb = ieee80211_pspoll_get(wl->hw, wl->vif);
			if (!skb)
				goto out_sleep;

			ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
						      skb->data,
						      skb->len);
			dev_kfree_skb(skb);
K
Kalle Valo 已提交
976
			if (ret < 0)
K
Kalle Valo 已提交
977
				goto out_sleep;
K
Kalle Valo 已提交
978

979
			ret = wl1251_acx_aid(wl, wl->aid);
K
Kalle Valo 已提交
980
			if (ret < 0)
K
Kalle Valo 已提交
981
				goto out_sleep;
K
Kalle Valo 已提交
982 983 984 985

			/* If we want to go in PSM but we're not there yet */
			if (wl->psm_requested && !wl->psm) {
				mode = STATION_POWER_SAVE_MODE;
986
				ret = wl1251_ps_set_mode(wl, mode);
K
Kalle Valo 已提交
987
				if (ret < 0)
K
Kalle Valo 已提交
988
					goto out_sleep;
K
Kalle Valo 已提交
989
			}
990 991 992 993
		} else {
			/* use defaults when not associated */
			wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
			wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
K
Kalle Valo 已提交
994 995 996 997
		}
	}
	if (changed & BSS_CHANGED_ERP_SLOT) {
		if (bss_conf->use_short_slot)
998
			ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
K
Kalle Valo 已提交
999
		else
1000
			ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
K
Kalle Valo 已提交
1001
		if (ret < 0) {
1002
			wl1251_warning("Set slot time failed %d", ret);
K
Kalle Valo 已提交
1003
			goto out_sleep;
K
Kalle Valo 已提交
1004 1005 1006 1007 1008
		}
	}

	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
		if (bss_conf->use_short_preamble)
1009
			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
K
Kalle Valo 已提交
1010
		else
1011
			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
K
Kalle Valo 已提交
1012 1013 1014 1015
	}

	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
		if (bss_conf->use_cts_prot)
1016
			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
K
Kalle Valo 已提交
1017
		else
1018
			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
K
Kalle Valo 已提交
1019
		if (ret < 0) {
1020 1021
			wl1251_warning("Set ctsprotect failed %d", ret);
			goto out;
K
Kalle Valo 已提交
1022 1023 1024 1025 1026
		}
	}

	if (changed & BSS_CHANGED_BEACON) {
		beacon = ieee80211_beacon_get(hw, vif);
1027
		ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
K
Kalle Valo 已提交
1028 1029 1030 1031 1032 1033 1034
					      beacon->len);

		if (ret < 0) {
			dev_kfree_skb(beacon);
			goto out;
		}

1035
		ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
K
Kalle Valo 已提交
1036 1037 1038 1039 1040 1041 1042
					      beacon->len);

		dev_kfree_skb(beacon);

		if (ret < 0)
			goto out;

K
Kalle Valo 已提交
1043 1044
		ret = wl1251_join(wl, wl->bss_type, wl->beacon_int,
				  wl->channel, wl->dtim_period);
K
Kalle Valo 已提交
1045 1046 1047 1048 1049

		if (ret < 0)
			goto out;
	}

K
Kalle Valo 已提交
1050
out_sleep:
1051
	wl1251_ps_elp_sleep(wl);
K
Kalle Valo 已提交
1052 1053

out:
K
Kalle Valo 已提交
1054 1055 1056 1057 1058
	mutex_unlock(&wl->mutex);
}


/* can't be const, mac80211 writes to this */
1059
static struct ieee80211_rate wl1251_rates[] = {
K
Kalle Valo 已提交
1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101
	{ .bitrate = 10,
	  .hw_value = 0x1,
	  .hw_value_short = 0x1, },
	{ .bitrate = 20,
	  .hw_value = 0x2,
	  .hw_value_short = 0x2,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 55,
	  .hw_value = 0x4,
	  .hw_value_short = 0x4,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 110,
	  .hw_value = 0x20,
	  .hw_value_short = 0x20,
	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
	{ .bitrate = 60,
	  .hw_value = 0x8,
	  .hw_value_short = 0x8, },
	{ .bitrate = 90,
	  .hw_value = 0x10,
	  .hw_value_short = 0x10, },
	{ .bitrate = 120,
	  .hw_value = 0x40,
	  .hw_value_short = 0x40, },
	{ .bitrate = 180,
	  .hw_value = 0x80,
	  .hw_value_short = 0x80, },
	{ .bitrate = 240,
	  .hw_value = 0x200,
	  .hw_value_short = 0x200, },
	{ .bitrate = 360,
	 .hw_value = 0x400,
	 .hw_value_short = 0x400, },
	{ .bitrate = 480,
	  .hw_value = 0x800,
	  .hw_value_short = 0x800, },
	{ .bitrate = 540,
	  .hw_value = 0x1000,
	  .hw_value_short = 0x1000, },
};

/* can't be const, mac80211 writes to this */
1102
static struct ieee80211_channel wl1251_channels[] = {
K
Kalle Valo 已提交
1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117
	{ .hw_value = 1, .center_freq = 2412},
	{ .hw_value = 2, .center_freq = 2417},
	{ .hw_value = 3, .center_freq = 2422},
	{ .hw_value = 4, .center_freq = 2427},
	{ .hw_value = 5, .center_freq = 2432},
	{ .hw_value = 6, .center_freq = 2437},
	{ .hw_value = 7, .center_freq = 2442},
	{ .hw_value = 8, .center_freq = 2447},
	{ .hw_value = 9, .center_freq = 2452},
	{ .hw_value = 10, .center_freq = 2457},
	{ .hw_value = 11, .center_freq = 2462},
	{ .hw_value = 12, .center_freq = 2467},
	{ .hw_value = 13, .center_freq = 2472},
};

1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134
static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
			     const struct ieee80211_tx_queue_params *params)
{
	struct wl1251 *wl = hw->priv;
	int ret;

	mutex_lock(&wl->mutex);

	wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);

	ret = wl1251_ps_elp_wakeup(wl);
	if (ret < 0)
		goto out;

	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
				params->cw_min, params->cw_max,
				params->aifs, params->txop);
1135 1136 1137 1138
	if (ret < 0)
		goto out_sleep;

	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
K
Kalle Valo 已提交
1139
				 CHANNEL_TYPE_EDCF,
1140 1141 1142 1143 1144
				 wl1251_tx_get_queue(queue),
				 WL1251_ACX_PS_SCHEME_LEGACY,
				 WL1251_ACX_ACK_POLICY_LEGACY);
	if (ret < 0)
		goto out_sleep;
1145

1146
out_sleep:
1147 1148 1149 1150 1151 1152 1153 1154
	wl1251_ps_elp_sleep(wl);

out:
	mutex_unlock(&wl->mutex);

	return ret;
}

K
Kalle Valo 已提交
1155
/* can't be const, mac80211 writes to this */
1156 1157 1158 1159 1160
static struct ieee80211_supported_band wl1251_band_2ghz = {
	.channels = wl1251_channels,
	.n_channels = ARRAY_SIZE(wl1251_channels),
	.bitrates = wl1251_rates,
	.n_bitrates = ARRAY_SIZE(wl1251_rates),
K
Kalle Valo 已提交
1161 1162
};

1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174
static const struct ieee80211_ops wl1251_ops = {
	.start = wl1251_op_start,
	.stop = wl1251_op_stop,
	.add_interface = wl1251_op_add_interface,
	.remove_interface = wl1251_op_remove_interface,
	.config = wl1251_op_config,
	.configure_filter = wl1251_op_configure_filter,
	.tx = wl1251_op_tx,
	.set_key = wl1251_op_set_key,
	.hw_scan = wl1251_op_hw_scan,
	.bss_info_changed = wl1251_op_bss_info_changed,
	.set_rts_threshold = wl1251_op_set_rts_threshold,
1175
	.conf_tx = wl1251_op_conf_tx,
K
Kalle Valo 已提交
1176 1177
};

1178
static int wl1251_register_hw(struct wl1251 *wl)
K
Kalle Valo 已提交
1179 1180 1181 1182 1183 1184 1185 1186 1187 1188
{
	int ret;

	if (wl->mac80211_registered)
		return 0;

	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);

	ret = ieee80211_register_hw(wl->hw);
	if (ret < 0) {
1189
		wl1251_error("unable to register mac80211 hw: %d", ret);
K
Kalle Valo 已提交
1190 1191 1192 1193 1194
		return ret;
	}

	wl->mac80211_registered = true;

1195
	wl1251_notice("loaded");
K
Kalle Valo 已提交
1196 1197 1198 1199

	return 0;
}

1200
int wl1251_init_ieee80211(struct wl1251 *wl)
K
Kalle Valo 已提交
1201
{
1202 1203
	int ret;

K
Kalle Valo 已提交
1204 1205
	/* The tx descriptor buffer and the TKIP space */
	wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
1206
		+ WL1251_TKIP_IV_SPACE;
K
Kalle Valo 已提交
1207 1208 1209 1210 1211 1212

	/* unit us */
	/* FIXME: find a proper value */
	wl->hw->channel_change_time = 10000;

	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
K
Kalle Valo 已提交
1213
		IEEE80211_HW_NOISE_DBM |
1214 1215
		IEEE80211_HW_SUPPORTS_PS |
		IEEE80211_HW_BEACON_FILTER;
K
Kalle Valo 已提交
1216 1217 1218

	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
	wl->hw->wiphy->max_scan_ssids = 1;
1219
	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
K
Kalle Valo 已提交
1220

K
Kalle Valo 已提交
1221 1222
	wl->hw->queues = 4;

1223 1224 1225
	ret = wl1251_register_hw(wl);
	if (ret)
		goto out;
K
Kalle Valo 已提交
1226

1227 1228
	wl1251_debugfs_init(wl);
	wl1251_notice("initialized");
K
Kalle Valo 已提交
1229

1230 1231 1232 1233 1234
	ret = 0;

out:
	return ret;
}
1235
EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
1236

1237
struct ieee80211_hw *wl1251_alloc_hw(void)
K
Kalle Valo 已提交
1238 1239
{
	struct ieee80211_hw *hw;
1240
	struct wl1251 *wl;
1241
	int i;
K
Kalle Valo 已提交
1242 1243
	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};

1244
	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
K
Kalle Valo 已提交
1245
	if (!hw) {
1246
		wl1251_error("could not alloc ieee80211_hw");
1247
		return ERR_PTR(-ENOMEM);
K
Kalle Valo 已提交
1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258
	}

	wl = hw->priv;
	memset(wl, 0, sizeof(*wl));

	wl->hw = hw;

	wl->data_in_count = 0;

	skb_queue_head_init(&wl->tx_queue);

1259
	INIT_WORK(&wl->filter_work, wl1251_filter_work);
1260
	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
1261
	wl->channel = WL1251_DEFAULT_CHANNEL;
K
Kalle Valo 已提交
1262 1263 1264 1265 1266 1267 1268
	wl->scanning = false;
	wl->default_key = 0;
	wl->listen_int = 1;
	wl->rx_counter = 0;
	wl->rx_handled = 0;
	wl->rx_current_buffer = 0;
	wl->rx_last_id = 0;
1269 1270
	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
K
Kalle Valo 已提交
1271 1272 1273 1274
	wl->elp = false;
	wl->psm = 0;
	wl->psm_requested = false;
	wl->tx_queue_stopped = false;
1275
	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
1276 1277
	wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
	wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1278
	wl->vif = NULL;
K
Kalle Valo 已提交
1279 1280 1281 1282 1283 1284

	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
		wl->tx_frames[i] = NULL;

	wl->next_tx_complete = 0;

K
Kalle Valo 已提交
1285 1286 1287
	INIT_WORK(&wl->irq_work, wl1251_irq_work);
	INIT_WORK(&wl->tx_work, wl1251_tx_work);

K
Kalle Valo 已提交
1288 1289 1290 1291 1292 1293 1294
	/*
	 * In case our MAC address is not correctly set,
	 * we use a random but Nokia MAC.
	 */
	memcpy(wl->mac_addr, nokia_oui, 3);
	get_random_bytes(wl->mac_addr + 3, 3);

1295
	wl->state = WL1251_STATE_OFF;
K
Kalle Valo 已提交
1296 1297 1298 1299 1300
	mutex_init(&wl->mutex);

	wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
	wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;

K
Kalle Valo 已提交
1301 1302
	wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
	if (!wl->rx_descriptor) {
1303
		wl1251_error("could not allocate memory for rx descriptor");
1304 1305
		ieee80211_free_hw(hw);
		return ERR_PTR(-ENOMEM);
K
Kalle Valo 已提交
1306 1307
	}

1308
	return hw;
K
Kalle Valo 已提交
1309
}
1310
EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
K
Kalle Valo 已提交
1311

1312
int wl1251_free_hw(struct wl1251 *wl)
K
Kalle Valo 已提交
1313 1314 1315
{
	ieee80211_unregister_hw(wl->hw);

1316
	wl1251_debugfs_exit(wl);
K
Kalle Valo 已提交
1317 1318 1319

	kfree(wl->target_mem_map);
	kfree(wl->data_path);
1320
	vfree(wl->fw);
K
Kalle Valo 已提交
1321 1322 1323
	wl->fw = NULL;
	kfree(wl->nvs);
	wl->nvs = NULL;
K
Kalle Valo 已提交
1324 1325 1326 1327

	kfree(wl->rx_descriptor);
	wl->rx_descriptor = NULL;

K
Kalle Valo 已提交
1328 1329 1330 1331
	ieee80211_free_hw(wl->hw);

	return 0;
}
1332 1333 1334 1335
EXPORT_SYMBOL_GPL(wl1251_free_hw);

MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
MODULE_LICENSE("GPL");
1336
MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
K
Kalle Valo 已提交
1337
MODULE_ALIAS("spi:wl1251");
B
Ben Hutchings 已提交
1338
MODULE_FIRMWARE(WL1251_FW_NAME);