iwl-core.h

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#ifndef __iwl_core_h__
#define __iwl_core_h__

#include "iwl-dev.h"

/************************
 * forward declarations *
 ************************/
struct iwl_host_cmd;
struct iwl_cmd;


#define IWLWIFI_VERSION "in-tree:"
#define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
#define DRV_AUTHOR     "<ilw@linux.intel.com>"

#define TIME_UNIT		1024

#define IWL_CMD(x) case x: return #x

struct iwl_lib_ops {
	/* set hw dependent parameters */
	int (*set_hw_params)(struct iwl_priv *priv);
	/* setup BT Rx handler */
	void (*bt_rx_handler_setup)(struct iwl_priv *priv);
	/* setup BT related deferred work */
	void (*bt_setup_deferred_work)(struct iwl_priv *priv);
	/* cancel deferred work */
	void (*cancel_deferred_work)(struct iwl_priv *priv);
	int (*set_channel_switch)(struct iwl_priv *priv,
				  struct ieee80211_channel_switch *ch_switch);
	/* device specific configuration */
	void (*nic_config)(struct iwl_priv *priv);

	/* eeprom operations (as defined in iwl-eeprom.h) */
	struct iwl_eeprom_ops eeprom_ops;

	/* temperature */
	void (*temperature)(struct iwl_priv *priv);
};

/*
 * @max_ll_items: max number of OTP blocks
 * @shadow_ram_support: shadow support for OTP memory
 * @led_compensation: compensate on the led on/off time per HW according
 *	to the deviation to achieve the desired led frequency.
 *	The detail algorithm is described in iwl-led.c
 * @chain_noise_num_beacons: number of beacons used to compute chain noise
 * @adv_thermal_throttle: support advance thermal throttle
 * @support_ct_kill_exit: support ct kill exit condition
 * @support_wimax_coexist: support wimax/wifi co-exist
 * @plcp_delta_threshold: plcp error rate threshold used to trigger
 *	radio tuning when there is a high receiving plcp error rate
 * @chain_noise_scale: default chain noise scale used for gain computation
 * @wd_timeout: TX queues watchdog timeout
 * @temperature_kelvin: temperature report by uCode in kelvin
 * @max_event_log_size: size of event log buffer size for ucode event logging
 * @shadow_reg_enable: HW shadhow register bit
 * @no_idle_support: do not support idle mode
 * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
 */
struct iwl_base_params {
	int eeprom_size;
	int num_of_queues;	/* def: HW dependent */
	int num_of_ampdu_queues;/* def: HW dependent */
	/* for iwl_apm_init() */
	u32 pll_cfg_val;

	const u16 max_ll_items;
	const bool shadow_ram_support;
	u16 led_compensation;
	int chain_noise_num_beacons;
	bool adv_thermal_throttle;
	bool support_ct_kill_exit;
	const bool support_wimax_coexist;
	u8 plcp_delta_threshold;
	s32 chain_noise_scale;
	unsigned int wd_timeout;
	bool temperature_kelvin;
	u32 max_event_log_size;
	const bool shadow_reg_enable;
	const bool no_idle_support;
	const bool hd_v2;
};
/*
 * @advanced_bt_coexist: support advanced bt coexist
 * @bt_init_traffic_load: specify initial bt traffic load
 * @bt_prio_boost: default bt priority boost value
 * @agg_time_limit: maximum number of uSec in aggregation
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
 */
struct iwl_bt_params {
	bool advanced_bt_coexist;
	u8 bt_init_traffic_load;
	u8 bt_prio_boost;
	u16 agg_time_limit;
	u8 ampdu_factor;
	u8 ampdu_density;
	bool bt_sco_disable;
	bool bt_session_2;
};
/*
 * @use_rts_for_aggregation: use rts/cts protection for HT traffic
 */
struct iwl_ht_params {
	const bool ht_greenfield_support; /* if used set to true */
	bool use_rts_for_aggregation;
	enum ieee80211_smps_mode smps_mode;
};

/**
 * struct iwl_cfg
 * @name: Offical name of the device
 * @fw_name_pre: Firmware filename prefix. The api version and extension
 *	(.ucode) will be added to filename before loading from disk. The
 *	filename is constructed as fw_name_pre<api>.ucode.
 * @ucode_api_max: Highest version of uCode API supported by driver.
 * @ucode_api_ok: oldest version of the uCode API that is OK to load
 *	without a warning, for use in transitions
 * @ucode_api_min: Lowest version of uCode API supported by driver.
 * @valid_tx_ant: valid transmit antenna
 * @valid_rx_ant: valid receive antenna
 * @sku: sku information from EEPROM
 * @eeprom_ver: EEPROM version
 * @eeprom_calib_ver: EEPROM calibration version
 * @lib: pointer to the lib ops
 * @additional_nic_config: additional nic configuration
 * @base_params: pointer to basic parameters
 * @ht_params: point to ht patameters
 * @bt_params: pointer to bt parameters
 * @pa_type: used by 6000 series only to identify the type of Power Amplifier
 * @need_dc_calib: need to perform init dc calibration
 * @need_temp_offset_calib: need to perform temperature offset calibration
 * @scan_antennas: available antenna for scan operation
 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
 * @adv_pm: advance power management
 * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
 * @internal_wimax_coex: internal wifi/wimax combo device
 * @iq_invert: I/Q inversion
 *
 * We enable the driver to be backward compatible wrt API version. The
 * driver specifies which APIs it supports (with @ucode_api_max being the
 * highest and @ucode_api_min the lowest). Firmware will only be loaded if
 * it has a supported API version.
 *
 * The ideal usage of this infrastructure is to treat a new ucode API
 * release as a new hardware revision.
 */
struct iwl_cfg {
	/* params specific to an individual device within a device family */
	const char *name;
	const char *fw_name_pre;
	const unsigned int ucode_api_max;
	const unsigned int ucode_api_ok;
	const unsigned int ucode_api_min;
	u8   valid_tx_ant;
	u8   valid_rx_ant;
	u16  sku;
	u16  eeprom_ver;
	u16  eeprom_calib_ver;
	const struct iwl_lib_ops *lib;
	void (*additional_nic_config)(struct iwl_priv *priv);
	/* params not likely to change within a device family */
	struct iwl_base_params *base_params;
	/* params likely to change within a device family */
	struct iwl_ht_params *ht_params;
	struct iwl_bt_params *bt_params;
	enum iwl_pa_type pa_type;	  /* if used set to IWL_PA_SYSTEM */
	const bool need_dc_calib;	  /* if used set to true */
	const bool need_temp_offset_calib; /* if used set to true */
	u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
	enum iwl_led_mode led_mode;
	const bool adv_pm;
	const bool rx_with_siso_diversity;
	const bool internal_wimax_coex;
	const bool iq_invert;
};

/***************************
 *   L i b                 *
 ***************************/

int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
		    const struct ieee80211_tx_queue_params *params);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
			   int hw_decrypt);
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
			 struct iwl_rxon_context *ctx);
void iwl_set_flags_for_band(struct iwl_priv *priv,
			    struct iwl_rxon_context *ctx,
			    enum ieee80211_band band,
			    struct ieee80211_vif *vif);
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
				  enum ieee80211_band band);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
			    struct iwl_rxon_context *ctx,
			    struct ieee80211_sta_ht_cap *ht_cap);
void iwl_connection_init_rx_config(struct iwl_priv *priv,
				   struct iwl_rxon_context *ctx);
void iwl_set_rate(struct iwl_priv *priv);
int iwl_mac_add_interface(struct ieee80211_hw *hw,
			  struct ieee80211_vif *vif);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
			      struct ieee80211_vif *vif);
int iwl_mac_change_interface(struct ieee80211_hw *hw,
			     struct ieee80211_vif *vif,
			     enum nl80211_iftype newtype, bool newp2p);
#ifdef CONFIG_IWLWIFI_DEBUGFS
int iwl_alloc_traffic_mem(struct iwl_priv *priv);
void iwl_free_traffic_mem(struct iwl_priv *priv);
void iwl_reset_traffic_log(struct iwl_priv *priv);
void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
				u16 length, struct ieee80211_hdr *header);
void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
				u16 length, struct ieee80211_hdr *header);
const char *get_mgmt_string(int cmd);
const char *get_ctrl_string(int cmd);
void iwl_clear_traffic_stats(struct iwl_priv *priv);
void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
		      u16 len);
#else
static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv)
{
	return 0;
}
static inline void iwl_free_traffic_mem(struct iwl_priv *priv)
{
}
static inline void iwl_reset_traffic_log(struct iwl_priv *priv)
{
}
static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
		      u16 length, struct ieee80211_hdr *header)
{
}
static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
		      u16 length, struct ieee80211_hdr *header)
{
}
static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
				    __le16 fc, u16 len)
{
}
#endif

/*****************************************************
* RX
******************************************************/
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);

void iwl_setup_watchdog(struct iwl_priv *priv);
/*****************************************************
 * TX power
 ****************************************************/
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);

/*******************************************************************************
 * Scanning
 ******************************************************************************/
void iwl_init_scan_params(struct iwl_priv *priv);
int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
void iwl_force_scan_end(struct iwl_priv *priv);
int iwl_mac_hw_scan(struct ieee80211_hw *hw,
		    struct ieee80211_vif *vif,
		    struct cfg80211_scan_request *req);
void iwl_internal_short_hw_scan(struct iwl_priv *priv);
int iwl_force_reset(struct iwl_priv *priv, int mode, bool external);
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
		       const u8 *ta, const u8 *ie, int ie_len, int left);
void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
			      enum ieee80211_band band,
			      u8 n_probes);
u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
			       enum ieee80211_band band,
			       struct ieee80211_vif *vif);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
void iwl_cancel_scan_deferred_work(struct iwl_priv *priv);
int __must_check iwl_scan_initiate(struct iwl_priv *priv,
				   struct ieee80211_vif *vif,
				   enum iwl_scan_type scan_type,
				   enum ieee80211_band band);

/* For faster active scanning, scan will move to the next channel if fewer than
 * PLCP_QUIET_THRESH packets are heard on this channel within
 * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
 * time if it's a quiet channel (nothing responded to our probe, and there's
 * no other traffic).
 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
#define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
#define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */

#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 7)

/*****************************************************
 *   S e n d i n g     H o s t     C o m m a n d s   *
 *****************************************************/

const char *get_cmd_string(u8 cmd);
void iwl_bg_watchdog(unsigned long data);
u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
			   u32 addon, u32 beacon_interval);


/*****************************************************
*  Error Handling Debugging
******************************************************/
void iwl_dump_csr(struct iwl_priv *priv);
int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display);
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
			     struct iwl_rxon_context *ctx);
#else
static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv,
					   struct iwl_rxon_context *ctx)
{
}
#endif

void iwl_clear_isr_stats(struct iwl_priv *priv);

/*****************************************************
*  GEOS
******************************************************/
int iwl_init_geos(struct iwl_priv *priv);
void iwl_free_geos(struct iwl_priv *priv);

/*************** DRIVER STATUS FUNCTIONS   *****/

#define STATUS_HCMD_ACTIVE	0	/* host command in progress */
/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
#define STATUS_INT_ENABLED	2
#define STATUS_RF_KILL_HW	3
#define STATUS_CT_KILL		4
#define STATUS_INIT		5
#define STATUS_ALIVE		6
#define STATUS_READY		7
#define STATUS_TEMPERATURE	8
#define STATUS_GEO_CONFIGURED	9
#define STATUS_EXIT_PENDING	10
#define STATUS_STATISTICS	12
#define STATUS_SCANNING		13
#define STATUS_SCAN_ABORTING	14
#define STATUS_SCAN_HW		15
#define STATUS_POWER_PMI	16
#define STATUS_FW_ERROR		17
#define STATUS_DEVICE_ENABLED	18
#define STATUS_CHANNEL_SWITCH_PENDING 19


static inline int iwl_is_ready(struct iwl_priv *priv)
{
	/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
	 * set but EXIT_PENDING is not */
	return test_bit(STATUS_READY, &priv->shrd->status) &&
	       test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) &&
	       !test_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
}

static inline int iwl_is_alive(struct iwl_priv *priv)
{
	return test_bit(STATUS_ALIVE, &priv->shrd->status);
}

static inline int iwl_is_init(struct iwl_priv *priv)
{
	return test_bit(STATUS_INIT, &priv->shrd->status);
}

static inline int iwl_is_rfkill_hw(struct iwl_priv *priv)
{
	return test_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
}

static inline int iwl_is_rfkill(struct iwl_priv *priv)
{
	return iwl_is_rfkill_hw(priv);
}

static inline int iwl_is_ctkill(struct iwl_priv *priv)
{
	return test_bit(STATUS_CT_KILL, &priv->shrd->status);
}

static inline int iwl_is_ready_rf(struct iwl_priv *priv)
{

	if (iwl_is_rfkill(priv))
		return 0;

	return iwl_is_ready(priv);
}

extern void iwl_send_bt_config(struct iwl_priv *priv);
extern int iwl_send_statistics_request(struct iwl_priv *priv,
				       u8 flags, bool clear);
void iwl_apm_stop(struct iwl_priv *priv);
int iwl_apm_init(struct iwl_priv *priv);

int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx);

static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
			struct iwl_priv *priv, enum ieee80211_band band)
{
	return priv->hw->wiphy->bands[band];
}

static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv)
{
	return priv->cfg->bt_params &&
	       priv->cfg->bt_params->advanced_bt_coexist;
}

extern bool bt_siso_mode;


void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);

#endif /* __iwl_core_h__ */