提交 e4c598b7 编写于 作者: F Fry, Donald H 提交者: John W. Linville

iwlagn: remove the indirection for iwl_apm_init

Not needed since the driver split.
Signed-off-by: NDon Fry <donald.h.fry@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 6b6db91c
......@@ -171,10 +171,7 @@ static struct iwl_lib_ops iwl1000_lib = {
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl1000_nic_config,
},
.nic_config = iwl1000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......
......@@ -171,10 +171,7 @@ static struct iwl_lib_ops iwl2000_lib = {
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
},
.nic_config = iwl2000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......
......@@ -324,10 +324,7 @@ static struct iwl_lib_ops iwl5000_lib = {
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl5000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl5000_nic_config,
},
.nic_config = iwl5000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......@@ -351,10 +348,7 @@ static struct iwl_lib_ops iwl5150_lib = {
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl5000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl5000_nic_config,
},
.nic_config = iwl5000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......
......@@ -264,10 +264,7 @@ static struct iwl_lib_ops iwl6000_lib = {
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl6000_nic_config,
},
.nic_config = iwl6000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......@@ -293,10 +290,7 @@ static struct iwl_lib_ops iwl6030_lib = {
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl6000_nic_config,
},
.nic_config = iwl6000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
......
......@@ -703,7 +703,7 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv)
/* nic_init */
spin_lock_irqsave(&priv->lock, flags);
priv->cfg->ops->lib->apm_ops.init(priv);
iwl_apm_init(priv);
/* Set interrupt coalescing calibration timer to default (512 usecs) */
iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
......@@ -712,7 +712,7 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv)
iwlagn_set_pwr_vmain(priv);
priv->cfg->ops->lib->apm_ops.config(priv);
priv->cfg->ops->lib->nic_config(priv);
/* Allocate the RX queue, or reset if it is already allocated */
trans_rx_init(priv);
......
......@@ -96,11 +96,6 @@ struct iwl_hcmd_utils_ops {
int (*request_scan)(struct iwl_priv *priv, struct ieee80211_vif *vif);
};
struct iwl_apm_ops {
int (*init)(struct iwl_priv *priv);
void (*config)(struct iwl_priv *priv);
};
struct iwl_temp_ops {
void (*temperature)(struct iwl_priv *priv);
};
......@@ -118,8 +113,8 @@ struct iwl_lib_ops {
int (*is_valid_rtc_data_addr)(u32 addr);
int (*set_channel_switch)(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch);
/* power management */
struct iwl_apm_ops apm_ops;
/* device specific configuration */
void (*nic_config)(struct iwl_priv *priv);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
......
......@@ -449,7 +449,7 @@ int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev)
}
e = (__le16 *)priv->eeprom;
priv->cfg->ops->lib->apm_ops.init(priv);
iwl_apm_init(priv);
ret = iwl_eeprom_verify_signature(priv);
if (ret < 0) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册