platform.c 15.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
/*
 * platform.c - DesignWare HS OTG Controller platform driver
 *
 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The names of the above-listed copyright holders may not be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
40
#include <linux/clk.h>
41 42
#include <linux/device.h>
#include <linux/dma-mapping.h>
43
#include <linux/of_device.h>
44
#include <linux/mutex.h>
45
#include <linux/platform_device.h>
46 47
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
48

49 50
#include <linux/usb/of.h>

51 52
#include "core.h"
#include "hcd.h"
53
#include "debug.h"
54 55 56

static const char dwc2_driver_name[] = "dwc2";

Z
Zhangfei Gao 已提交
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
static const struct dwc2_core_params params_hi6220 = {
	.otg_cap			= 2,	/* No HNP/SRP capable */
	.otg_ver			= 0,	/* 1.3 */
	.dma_enable			= 1,
	.dma_desc_enable		= 0,
	.dma_desc_fs_enable		= 0,
	.speed				= 0,	/* High Speed */
	.enable_dynamic_fifo		= 1,
	.en_multiple_tx_fifo		= 1,
	.host_rx_fifo_size		= 512,
	.host_nperio_tx_fifo_size	= 512,
	.host_perio_tx_fifo_size	= 512,
	.max_transfer_size		= 65535,
	.max_packet_count		= 511,
	.host_channels			= 16,
	.phy_type			= 1,	/* UTMI */
	.phy_utmi_width			= 8,
	.phy_ulpi_ddr			= 0,	/* Single */
	.phy_ulpi_ext_vbus		= 0,
	.i2c_enable			= 0,
	.ulpi_fs_ls			= 0,
	.host_support_fs_ls_low_power	= 0,
	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
	.ts_dline			= 0,
	.reload_ctl			= 0,
	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
					  GAHBCFG_HBSTLEN_SHIFT,
	.uframe_sched			= 0,
	.external_id_pin_ctl		= -1,
	.hibernation			= -1,
};

89 90 91 92 93
static const struct dwc2_core_params params_bcm2835 = {
	.otg_cap			= 0,	/* HNP/SRP capable */
	.otg_ver			= 0,	/* 1.3 */
	.dma_enable			= 1,
	.dma_desc_enable		= 0,
94
	.dma_desc_fs_enable		= 0,
95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114
	.speed				= 0,	/* High Speed */
	.enable_dynamic_fifo		= 1,
	.en_multiple_tx_fifo		= 1,
	.host_rx_fifo_size		= 774,	/* 774 DWORDs */
	.host_nperio_tx_fifo_size	= 256,	/* 256 DWORDs */
	.host_perio_tx_fifo_size	= 512,	/* 512 DWORDs */
	.max_transfer_size		= 65535,
	.max_packet_count		= 511,
	.host_channels			= 8,
	.phy_type			= 1,	/* UTMI */
	.phy_utmi_width			= 8,	/* 8 bits */
	.phy_ulpi_ddr			= 0,	/* Single */
	.phy_ulpi_ext_vbus		= 0,
	.i2c_enable			= 0,
	.ulpi_fs_ls			= 0,
	.host_support_fs_ls_low_power	= 0,
	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
	.ts_dline			= 0,
	.reload_ctl			= 0,
	.ahbcfg				= 0x10,
115
	.uframe_sched			= 0,
116
	.external_id_pin_ctl		= -1,
117
	.hibernation			= -1,
118 119
};

120 121 122 123 124
static const struct dwc2_core_params params_rk3066 = {
	.otg_cap			= 2,	/* non-HNP/non-SRP */
	.otg_ver			= -1,
	.dma_enable			= -1,
	.dma_desc_enable		= 0,
125
	.dma_desc_fs_enable		= 0,
126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
	.speed				= -1,
	.enable_dynamic_fifo		= 1,
	.en_multiple_tx_fifo		= -1,
	.host_rx_fifo_size		= 520,	/* 520 DWORDs */
	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
	.host_perio_tx_fifo_size	= 256,	/* 256 DWORDs */
	.max_transfer_size		= 65535,
	.max_packet_count		= -1,
	.host_channels			= -1,
	.phy_type			= -1,
	.phy_utmi_width			= -1,
	.phy_ulpi_ddr			= -1,
	.phy_ulpi_ext_vbus		= -1,
	.i2c_enable			= -1,
	.ulpi_fs_ls			= -1,
	.host_support_fs_ls_low_power	= -1,
	.host_ls_low_power_phy_clk	= -1,
	.ts_dline			= -1,
	.reload_ctl			= -1,
145 146
	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
					  GAHBCFG_HBSTLEN_SHIFT,
147
	.uframe_sched			= -1,
148
	.external_id_pin_ctl		= -1,
149
	.hibernation			= -1,
150 151
};

J
John Youn 已提交
152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
/*
 * Check the dr_mode against the module configuration and hardware
 * capabilities.
 *
 * The hardware, module, and dr_mode, can each be set to host, device,
 * or otg. Check that all these values are compatible and adjust the
 * value of dr_mode if possible.
 *
 *                      actual
 *    HW  MOD dr_mode   dr_mode
 *  ------------------------------
 *   HST  HST  any    :  HST
 *   HST  DEV  any    :  ---
 *   HST  OTG  any    :  HST
 *
 *   DEV  HST  any    :  ---
 *   DEV  DEV  any    :  DEV
 *   DEV  OTG  any    :  DEV
 *
 *   OTG  HST  any    :  HST
 *   OTG  DEV  any    :  DEV
 *   OTG  OTG  any    :  dr_mode
 */
static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
{
	enum usb_dr_mode mode;

	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
		hsotg->dr_mode = USB_DR_MODE_OTG;

	mode = hsotg->dr_mode;

	if (dwc2_hw_is_device(hsotg)) {
		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
			dev_err(hsotg->dev,
				"Controller does not support host mode.\n");
			return -EINVAL;
		}
		mode = USB_DR_MODE_PERIPHERAL;
	} else if (dwc2_hw_is_host(hsotg)) {
		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
			dev_err(hsotg->dev,
				"Controller does not support device mode.\n");
			return -EINVAL;
		}
		mode = USB_DR_MODE_HOST;
	} else {
		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
			mode = USB_DR_MODE_HOST;
		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
			mode = USB_DR_MODE_PERIPHERAL;
	}

	if (mode != hsotg->dr_mode) {
		dev_warn(hsotg->dev,
			"Configuration mismatch. dr_mode forced to %s\n",
			mode == USB_DR_MODE_HOST ? "host" : "device");

		hsotg->dr_mode = mode;
	}

	return 0;
}

217 218 219 220 221 222 223 224 225 226
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
	struct platform_device *pdev = to_platform_device(hsotg->dev);
	int ret;

	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
				    hsotg->supplies);
	if (ret)
		return ret;

S
Stefan Wahren 已提交
227 228 229 230 231
	if (hsotg->clk) {
		ret = clk_prepare_enable(hsotg->clk);
		if (ret)
			return ret;
	}
232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278

	if (hsotg->uphy)
		ret = usb_phy_init(hsotg->uphy);
	else if (hsotg->plat && hsotg->plat->phy_init)
		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
	else {
		ret = phy_power_on(hsotg->phy);
		if (ret == 0)
			ret = phy_init(hsotg->phy);
	}

	return ret;
}

/**
 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
 * @hsotg: The driver state
 *
 * A wrapper for platform code responsible for controlling
 * low-level USB platform resources (phy, clock, regulators)
 */
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
	int ret = __dwc2_lowlevel_hw_enable(hsotg);

	if (ret == 0)
		hsotg->ll_hw_enabled = true;
	return ret;
}

static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
	struct platform_device *pdev = to_platform_device(hsotg->dev);
	int ret = 0;

	if (hsotg->uphy)
		usb_phy_shutdown(hsotg->uphy);
	else if (hsotg->plat && hsotg->plat->phy_exit)
		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
	else {
		ret = phy_exit(hsotg->phy);
		if (ret == 0)
			ret = phy_power_off(hsotg->phy);
	}
	if (ret)
		return ret;

S
Stefan Wahren 已提交
279 280
	if (hsotg->clk)
		clk_disable_unprepare(hsotg->clk);
281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316

	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
				     hsotg->supplies);

	return ret;
}

/**
 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
 * @hsotg: The driver state
 *
 * A wrapper for platform code responsible for controlling
 * low-level USB platform resources (phy, clock, regulators)
 */
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
	int ret = __dwc2_lowlevel_hw_disable(hsotg);

	if (ret == 0)
		hsotg->ll_hw_enabled = false;
	return ret;
}

static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
	int i, ret;

	/* Set default UTMI width */
	hsotg->phyif = GUSBCFG_PHYIF16;

	/*
	 * Attempt to find a generic PHY, then look for an old style
	 * USB PHY and then fall back to pdata
	 */
	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
	if (IS_ERR(hsotg->phy)) {
S
Stefan Wahren 已提交
317 318 319 320 321 322 323 324 325 326 327 328 329 330 331
		ret = PTR_ERR(hsotg->phy);
		switch (ret) {
		case -ENODEV:
		case -ENOSYS:
			hsotg->phy = NULL;
			break;
		case -EPROBE_DEFER:
			return ret;
		default:
			dev_err(hsotg->dev, "error getting phy %d\n", ret);
			return ret;
		}
	}

	if (!hsotg->phy) {
332
		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
S
Stefan Wahren 已提交
333 334 335 336 337 338 339 340 341 342 343 344 345 346 347
		if (IS_ERR(hsotg->uphy)) {
			ret = PTR_ERR(hsotg->uphy);
			switch (ret) {
			case -ENODEV:
			case -ENXIO:
				hsotg->uphy = NULL;
				break;
			case -EPROBE_DEFER:
				return ret;
			default:
				dev_err(hsotg->dev, "error getting usb phy %d\n",
					ret);
				return ret;
			}
		}
348 349
	}

S
Stefan Wahren 已提交
350 351
	hsotg->plat = dev_get_platdata(hsotg->dev);

352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380
	if (hsotg->phy) {
		/*
		 * If using the generic PHY framework, check if the PHY bus
		 * width is 8-bit and set the phyif appropriately.
		 */
		if (phy_get_bus_width(hsotg->phy) == 8)
			hsotg->phyif = GUSBCFG_PHYIF8;
	}

	/* Clock */
	hsotg->clk = devm_clk_get(hsotg->dev, "otg");
	if (IS_ERR(hsotg->clk)) {
		hsotg->clk = NULL;
		dev_dbg(hsotg->dev, "cannot get otg clock\n");
	}

	/* Regulators */
	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];

	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
				      hsotg->supplies);
	if (ret) {
		dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
		return ret;
	}
	return 0;
}

381 382 383 384 385 386 387 388 389 390 391 392 393 394 395
/**
 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
 * DWC_otg driver
 *
 * @dev: Platform device
 *
 * This routine is called, for example, when the rmmod command is executed. The
 * device may or may not be electrically present. If it is present, the driver
 * stops device processing. Any resources used on behalf of this device are
 * freed.
 */
static int dwc2_driver_remove(struct platform_device *dev)
{
	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);

396
	dwc2_debugfs_exit(hsotg);
397 398 399
	if (hsotg->hcd_enabled)
		dwc2_hcd_remove(hsotg);
	if (hsotg->gadget_enabled)
400
		dwc2_hsotg_remove(hsotg);
401

402 403 404
	if (hsotg->ll_hw_enabled)
		dwc2_lowlevel_hw_disable(hsotg);

405 406 407
	return 0;
}

408 409
static const struct of_device_id dwc2_of_match_table[] = {
	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
Z
Zhangfei Gao 已提交
410
	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
411
	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
412
	{ .compatible = "snps,dwc2", .data = NULL },
413
	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
414 415 416 417
	{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);

418 419 420 421 422 423 424 425 426 427 428 429 430 431
/**
 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
 * driver
 *
 * @dev: Platform device
 *
 * This routine creates the driver components required to control the device
 * (core, HCD, and PCD) and initializes the device. The driver components are
 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
 * in the device private data. This allows the driver to access the dwc2_hsotg
 * structure on subsequent calls to driver methods for this device.
 */
static int dwc2_driver_probe(struct platform_device *dev)
{
432 433 434
	const struct of_device_id *match;
	const struct dwc2_core_params *params;
	struct dwc2_core_params defparams;
435 436 437 438 439
	struct dwc2_hsotg *hsotg;
	struct resource *res;
	int retval;
	int irq;

440 441 442 443 444 445 446
	match = of_match_device(dwc2_of_match_table, &dev->dev);
	if (match && match->data) {
		params = match->data;
	} else {
		/* Default all params to autodetect */
		dwc2_set_all_params(&defparams, -1);
		params = &defparams;
447 448 449 450

		/*
		 * Disable descriptor dma mode by default as the HW can support
		 * it, but does not support it for SPLIT transactions.
451
		 * Disable it for FS devices as well.
452 453
		 */
		defparams.dma_desc_enable = 0;
454
		defparams.dma_desc_fs_enable = 0;
455
	}
456 457 458 459 460 461 462

	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
	if (!hsotg)
		return -ENOMEM;

	hsotg->dev = &dev->dev;

463 464 465 466 467
	/*
	 * Use reasonable defaults so platforms don't have to provide these.
	 */
	if (!dev->dev.dma_mask)
		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
468 469 470
	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
	if (retval)
		return retval;
471

472 473 474 475 476 477 478 479
	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	hsotg->regs = devm_ioremap_resource(&dev->dev, res);
	if (IS_ERR(hsotg->regs))
		return PTR_ERR(hsotg->regs);

	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
		(unsigned long)res->start, hsotg->regs);

480
	retval = dwc2_lowlevel_hw_init(hsotg);
481 482 483
	if (retval)
		return retval;

484 485
	spin_lock_init(&hsotg->lock);

486 487 488 489 490 491 492
	hsotg->core_params = devm_kzalloc(&dev->dev,
				sizeof(*hsotg->core_params), GFP_KERNEL);
	if (!hsotg->core_params)
		return -ENOMEM;

	dwc2_set_all_params(hsotg->core_params, -1);

493 494 495 496 497 498 499 500 501 502 503 504 505 506
	irq = platform_get_irq(dev, 0);
	if (irq < 0) {
		dev_err(&dev->dev, "missing IRQ resource\n");
		return irq;
	}

	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
		irq);
	retval = devm_request_irq(hsotg->dev, irq,
				  dwc2_handle_common_intr, IRQF_SHARED,
				  dev_name(hsotg->dev), hsotg);
	if (retval)
		return retval;

507 508 509 510
	retval = dwc2_lowlevel_hw_enable(hsotg);
	if (retval)
		return retval;

J
John Youn 已提交
511 512 513 514
	retval = dwc2_get_dr_mode(hsotg);
	if (retval)
		return retval;

515 516 517 518
	/*
	 * Reset before dwc2_get_hwparams() then it could get power-on real
	 * reset value form registers.
	 */
J
John Youn 已提交
519
	dwc2_core_reset_and_force_dr_mode(hsotg);
520

521 522 523 524 525
	/* Detect config values from hardware */
	retval = dwc2_get_hwparams(hsotg);
	if (retval)
		goto error;

526 527 528
	/* Validate parameter values */
	dwc2_set_parameters(hsotg, params);

529 530 531
	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
		retval = dwc2_gadget_init(hsotg, irq);
		if (retval)
532
			goto error;
533 534 535 536
		hsotg->gadget_enabled = 1;
	}

	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
537
		retval = dwc2_hcd_init(hsotg, irq);
538 539
		if (retval) {
			if (hsotg->gadget_enabled)
540
				dwc2_hsotg_remove(hsotg);
541
			goto error;
542 543 544
		}
		hsotg->hcd_enabled = 1;
	}
545 546 547

	platform_set_drvdata(dev, hsotg);

548 549
	dwc2_debugfs_init(hsotg);

550 551 552 553 554 555 556 557
	/* Gadget code manages lowlevel hw on its own */
	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
		dwc2_lowlevel_hw_disable(hsotg);

	return 0;

error:
	dwc2_lowlevel_hw_disable(hsotg);
558 559 560
	return retval;
}

561
static int __maybe_unused dwc2_suspend(struct device *dev)
562
{
563
	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
564 565
	int ret = 0;

566 567 568 569 570
	if (dwc2_is_device_mode(dwc2))
		dwc2_hsotg_suspend(dwc2);

	if (dwc2->ll_hw_enabled)
		ret = __dwc2_lowlevel_hw_disable(dwc2);
571

572 573 574
	return ret;
}

575
static int __maybe_unused dwc2_resume(struct device *dev)
576
{
577
	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
578 579
	int ret = 0;

580 581 582 583 584 585 586
	if (dwc2->ll_hw_enabled) {
		ret = __dwc2_lowlevel_hw_enable(dwc2);
		if (ret)
			return ret;
	}

	if (dwc2_is_device_mode(dwc2))
587
		ret = dwc2_hsotg_resume(dwc2);
588

589 590 591
	return ret;
}

592 593 594 595
static const struct dev_pm_ops dwc2_dev_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};

596 597
static struct platform_driver dwc2_platform_driver = {
	.driver = {
598
		.name = dwc2_driver_name,
599
		.of_match_table = dwc2_of_match_table,
600
		.pm = &dwc2_dev_pm_ops,
601 602 603 604 605 606 607 608 609 610
	},
	.probe = dwc2_driver_probe,
	.remove = dwc2_driver_remove,
};

module_platform_driver(dwc2_platform_driver);

MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
MODULE_LICENSE("Dual BSD/GPL");