sdhci-of-esdhc.c 18.1 KB
Newer Older
1 2 3
/*
 * Freescale eSDHC controller driver.
 *
4
 * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
5 6 7 8 9 10 11 12 13 14 15
 * Copyright (c) 2009 MontaVista Software, Inc.
 *
 * Authors: Xiaobo Xie <X.Xie@freescale.com>
 *	    Anton Vorontsov <avorontsov@ru.mvista.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 */

16
#include <linux/err.h>
17
#include <linux/io.h>
18
#include <linux/of.h>
19
#include <linux/delay.h>
20
#include <linux/module.h>
21
#include <linux/sys_soc.h>
22
#include <linux/mmc/host.h>
23
#include "sdhci-pltfm.h"
24
#include "sdhci-esdhc.h"
25

J
Jerry Huang 已提交
26
#define VENDOR_V_22	0x12
27
#define VENDOR_V_23	0x13
28 29 30 31

struct sdhci_esdhc {
	u8 vendor_ver;
	u8 spec_ver;
32
	bool quirk_incorrect_hostver;
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
};

/**
 * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
 *		       to make it compatible with SD spec.
 *
 * @host: pointer to sdhci_host
 * @spec_reg: SD spec register address
 * @value: 32bit eSDHC register value on spec_reg address
 *
 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
 * registers are 32 bits. There are differences in register size, register
 * address, register function, bit position and function between eSDHC spec
 * and SD spec.
 *
 * Return a fixed up register value
 */
static u32 esdhc_readl_fixup(struct sdhci_host *host,
				     int spec_reg, u32 value)
J
Jerry Huang 已提交
52
{
53
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
54
	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
J
Jerry Huang 已提交
55 56 57 58 59 60 61
	u32 ret;

	/*
	 * The bit of ADMA flag in eSDHC is not compatible with standard
	 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
	 * supported by eSDHC.
	 * And for many FSL eSDHC controller, the reset value of field
62
	 * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
J
Jerry Huang 已提交
63 64
	 * only these vendor version is greater than 2.2/0x12 support ADMA.
	 */
65 66 67 68 69
	if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
		if (esdhc->vendor_ver > VENDOR_V_22) {
			ret = value | SDHCI_CAN_DO_ADMA2;
			return ret;
		}
J
Jerry Huang 已提交
70
	}
71 72 73 74 75 76 77 78 79 80 81 82 83 84
	/*
	 * The DAT[3:0] line signal levels and the CMD line signal level are
	 * not compatible with standard SDHC register. The line signal levels
	 * DAT[7:0] are at bits 31:24 and the command line signal level is at
	 * bit 23. All other bits are the same as in the standard SDHC
	 * register.
	 */
	if (spec_reg == SDHCI_PRESENT_STATE) {
		ret = value & 0x000fffff;
		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
		ret |= (value << 1) & SDHCI_CMD_LVL;
		return ret;
	}

85
	ret = value;
J
Jerry Huang 已提交
86 87 88
	return ret;
}

89 90
static u16 esdhc_readw_fixup(struct sdhci_host *host,
				     int spec_reg, u32 value)
91
{
92 93
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
94
	u16 ret;
95
	int shift = (spec_reg & 0x2) * 8;
96

97 98
	if (spec_reg == SDHCI_HOST_VERSION)
		ret = value & 0xffff;
99
	else
100
		ret = (value >> shift) & 0xffff;
101 102 103 104 105 106
	/* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
	 * vendor version and spec version information.
	 */
	if ((spec_reg == SDHCI_HOST_VERSION) &&
	    (esdhc->quirk_incorrect_hostver))
		ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
107 108 109
	return ret;
}

110 111
static u8 esdhc_readb_fixup(struct sdhci_host *host,
				     int spec_reg, u32 value)
112
{
113 114 115 116 117
	u8 ret;
	u8 dma_bits;
	int shift = (spec_reg & 0x3) * 8;

	ret = (value >> shift) & 0xff;
118 119 120 121 122

	/*
	 * "DMA select" locates at offset 0x28 in SD specification, but on
	 * P5020 or P3041, it locates at 0x29.
	 */
123
	if (spec_reg == SDHCI_HOST_CONTROL) {
124
		/* DMA select is 22,23 bits in Protocol Control Register */
125
		dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
126 127 128 129
		/* fixup the result */
		ret &= ~SDHCI_CTRL_DMA_MASK;
		ret |= dma_bits;
	}
130 131 132
	return ret;
}

133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
/**
 * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
 *			written into eSDHC register.
 *
 * @host: pointer to sdhci_host
 * @spec_reg: SD spec register address
 * @value: 8/16/32bit SD spec register value that would be written
 * @old_value: 32bit eSDHC register value on spec_reg address
 *
 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
 * registers are 32 bits. There are differences in register size, register
 * address, register function, bit position and function between eSDHC spec
 * and SD spec.
 *
 * Return a fixed up register value
 */
static u32 esdhc_writel_fixup(struct sdhci_host *host,
				     int spec_reg, u32 value, u32 old_value)
151
{
152 153
	u32 ret;

154
	/*
155 156 157
	 * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
	 * when SYSCTL[RSTD] is set for some special operations.
	 * No any impact on other operation.
158
	 */
159 160 161 162 163 164
	if (spec_reg == SDHCI_INT_ENABLE)
		ret = value | SDHCI_INT_BLK_GAP;
	else
		ret = value;

	return ret;
165 166
}

167 168
static u32 esdhc_writew_fixup(struct sdhci_host *host,
				     int spec_reg, u16 value, u32 old_value)
169
{
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	int shift = (spec_reg & 0x2) * 8;
	u32 ret;

	switch (spec_reg) {
	case SDHCI_TRANSFER_MODE:
		/*
		 * Postpone this write, we must do it together with a
		 * command write that is down below. Return old value.
		 */
		pltfm_host->xfer_mode_shadow = value;
		return old_value;
	case SDHCI_COMMAND:
		ret = (value << 16) | pltfm_host->xfer_mode_shadow;
		return ret;
	}

	ret = old_value & (~(0xffff << shift));
	ret |= (value << shift);

	if (spec_reg == SDHCI_BLOCK_SIZE) {
191 192 193 194 195
		/*
		 * Two last DMA bits are reserved, and first one is used for
		 * non-standard blksz of 4096 bytes that we don't support
		 * yet. So clear the DMA boundary bits.
		 */
196
		ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
197
	}
198
	return ret;
199 200
}

201 202
static u32 esdhc_writeb_fixup(struct sdhci_host *host,
				     int spec_reg, u8 value, u32 old_value)
203
{
204 205 206 207 208
	u32 ret;
	u32 dma_bits;
	u8 tmp;
	int shift = (spec_reg & 0x3) * 8;

209 210 211 212 213 214
	/*
	 * eSDHC doesn't have a standard power control register, so we do
	 * nothing here to avoid incorrect operation.
	 */
	if (spec_reg == SDHCI_POWER_CONTROL)
		return old_value;
215 216 217 218
	/*
	 * "DMA select" location is offset 0x28 in SD specification, but on
	 * P5020 or P3041, it's located at 0x29.
	 */
219
	if (spec_reg == SDHCI_HOST_CONTROL) {
220 221 222 223 224
		/*
		 * If host control register is not standard, exit
		 * this function
		 */
		if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
225
			return old_value;
226

227
		/* DMA select is 22,23 bits in Protocol Control Register */
228 229 230 231 232 233 234 235 236
		dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
		ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
		tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
		      (old_value & SDHCI_CTRL_DMA_MASK);
		ret = (ret & (~0xff)) | tmp;

		/* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
		ret &= ~ESDHC_HOST_CONTROL_RES;
		return ret;
237 238
	}

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368
	ret = (old_value & (~(0xff << shift))) | (value << shift);
	return ret;
}

static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
{
	u32 ret;
	u32 value;

	value = ioread32be(host->ioaddr + reg);
	ret = esdhc_readl_fixup(host, reg, value);

	return ret;
}

static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
{
	u32 ret;
	u32 value;

	value = ioread32(host->ioaddr + reg);
	ret = esdhc_readl_fixup(host, reg, value);

	return ret;
}

static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
{
	u16 ret;
	u32 value;
	int base = reg & ~0x3;

	value = ioread32be(host->ioaddr + base);
	ret = esdhc_readw_fixup(host, reg, value);
	return ret;
}

static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
{
	u16 ret;
	u32 value;
	int base = reg & ~0x3;

	value = ioread32(host->ioaddr + base);
	ret = esdhc_readw_fixup(host, reg, value);
	return ret;
}

static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
{
	u8 ret;
	u32 value;
	int base = reg & ~0x3;

	value = ioread32be(host->ioaddr + base);
	ret = esdhc_readb_fixup(host, reg, value);
	return ret;
}

static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
{
	u8 ret;
	u32 value;
	int base = reg & ~0x3;

	value = ioread32(host->ioaddr + base);
	ret = esdhc_readb_fixup(host, reg, value);
	return ret;
}

static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
{
	u32 value;

	value = esdhc_writel_fixup(host, reg, val, 0);
	iowrite32be(value, host->ioaddr + reg);
}

static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
{
	u32 value;

	value = esdhc_writel_fixup(host, reg, val, 0);
	iowrite32(value, host->ioaddr + reg);
}

static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
{
	int base = reg & ~0x3;
	u32 value;
	u32 ret;

	value = ioread32be(host->ioaddr + base);
	ret = esdhc_writew_fixup(host, reg, val, value);
	if (reg != SDHCI_TRANSFER_MODE)
		iowrite32be(ret, host->ioaddr + base);
}

static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
{
	int base = reg & ~0x3;
	u32 value;
	u32 ret;

	value = ioread32(host->ioaddr + base);
	ret = esdhc_writew_fixup(host, reg, val, value);
	if (reg != SDHCI_TRANSFER_MODE)
		iowrite32(ret, host->ioaddr + base);
}

static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
{
	int base = reg & ~0x3;
	u32 value;
	u32 ret;

	value = ioread32be(host->ioaddr + base);
	ret = esdhc_writeb_fixup(host, reg, val, value);
	iowrite32be(ret, host->ioaddr + base);
}

static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
{
	int base = reg & ~0x3;
	u32 value;
	u32 ret;

	value = ioread32(host->ioaddr + base);
	ret = esdhc_writeb_fixup(host, reg, val, value);
	iowrite32(ret, host->ioaddr + base);
369 370
}

371 372 373 374 375 376 377
/*
 * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
 * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
 * and Block Gap Event(IRQSTAT[BGE]) are also set.
 * For Continue, apply soft reset for data(SYSCTL[RSTD]);
 * and re-issue the entire read transaction from beginning.
 */
378
static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
379
{
380
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
381
	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
382 383 384 385 386
	bool applicable;
	dma_addr_t dmastart;
	dma_addr_t dmanow;

	applicable = (intmask & SDHCI_INT_DATA_END) &&
387 388
		     (intmask & SDHCI_INT_BLK_GAP) &&
		     (esdhc->vendor_ver == VENDOR_V_23);
389 390 391 392 393 394 395 396 397 398 399 400 401 402 403
	if (!applicable)
		return;

	host->data->error = 0;
	dmastart = sg_dma_address(host->data->sg);
	dmanow = dmastart + host->data->bytes_xfered;
	/*
	 * Force update to the next DMA block boundary.
	 */
	dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
		SDHCI_DEFAULT_BOUNDARY_SIZE;
	host->data->bytes_xfered = dmanow - dmastart;
	sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}

404
static int esdhc_of_enable_dma(struct sdhci_host *host)
405
{
406 407 408 409 410
	u32 value;

	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
	value |= ESDHC_DMA_SNOOP;
	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
411 412 413
	return 0;
}

414
static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
415
{
416
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
417

418
	return pltfm_host->clock;
419 420
}

421
static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
422
{
423
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
424

425
	return pltfm_host->clock / 256 / 16;
426 427
}

428 429
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
430
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
431
	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
432
	int pre_div = 1;
433 434 435
	int div = 1;
	u32 temp;

436 437
	host->mmc->actual_clock = 0;

438
	if (clock == 0)
439
		return;
440

441
	/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
442
	if (esdhc->vendor_ver < VENDOR_V_23)
443 444
		pre_div = 2;

445 446 447 448 449 450 451 452
	/* Workaround to reduce the clock frequency for p1010 esdhc */
	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
		if (clock > 20000000)
			clock -= 5000000;
		if (clock > 40000000)
			clock -= 5000000;
	}

453 454 455 456 457 458 459 460 461 462 463 464
	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
		| ESDHC_CLOCK_MASK);
	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);

	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
		pre_div *= 2;

	while (host->max_clk / pre_div / div > clock && div < 16)
		div++;

	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
465
		clock, host->max_clk / pre_div / div);
466
	host->mmc->actual_clock = host->max_clk / pre_div / div;
467 468 469 470 471 472 473 474 475
	pre_div >>= 1;
	div--;

	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
		| (div << ESDHC_DIVIDER_SHIFT)
		| (pre_div << ESDHC_PREDIV_SHIFT));
	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
	mdelay(1);
476 477
}

478
static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
479 480 481
{
	u32 ctrl;

482 483
	ctrl = sdhci_readl(host, ESDHC_PROCTL);
	ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
484 485
	switch (width) {
	case MMC_BUS_WIDTH_8:
486
		ctrl |= ESDHC_CTRL_8BITBUS;
487 488 489
		break;

	case MMC_BUS_WIDTH_4:
490
		ctrl |= ESDHC_CTRL_4BITBUS;
491 492 493 494 495 496
		break;

	default:
		break;
	}

497
	sdhci_writel(host, ctrl, ESDHC_PROCTL);
498 499
}

500 501 502 503 504 505 506 507
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
	sdhci_reset(host, mask);

	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}

508
#ifdef CONFIG_PM_SLEEP
509 510 511 512 513
static u32 esdhc_proctl;
static int esdhc_of_suspend(struct device *dev)
{
	struct sdhci_host *host = dev_get_drvdata(dev);

514
	esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
515 516 517 518

	return sdhci_suspend_host(host);
}

519
static int esdhc_of_resume(struct device *dev)
520 521 522 523 524 525 526
{
	struct sdhci_host *host = dev_get_drvdata(dev);
	int ret = sdhci_resume_host(host);

	if (ret == 0) {
		/* Isn't this already done by sdhci_resume_host() ? --rmk */
		esdhc_of_enable_dma(host);
527
		sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
528 529 530 531 532
	}
	return ret;
}
#endif

533 534 535 536
static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
			esdhc_of_suspend,
			esdhc_of_resume);

537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578
static const struct sdhci_ops sdhci_esdhc_be_ops = {
	.read_l = esdhc_be_readl,
	.read_w = esdhc_be_readw,
	.read_b = esdhc_be_readb,
	.write_l = esdhc_be_writel,
	.write_w = esdhc_be_writew,
	.write_b = esdhc_be_writeb,
	.set_clock = esdhc_of_set_clock,
	.enable_dma = esdhc_of_enable_dma,
	.get_max_clock = esdhc_of_get_max_clock,
	.get_min_clock = esdhc_of_get_min_clock,
	.adma_workaround = esdhc_of_adma_workaround,
	.set_bus_width = esdhc_pltfm_set_bus_width,
	.reset = esdhc_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
};

static const struct sdhci_ops sdhci_esdhc_le_ops = {
	.read_l = esdhc_le_readl,
	.read_w = esdhc_le_readw,
	.read_b = esdhc_le_readb,
	.write_l = esdhc_le_writel,
	.write_w = esdhc_le_writew,
	.write_b = esdhc_le_writeb,
	.set_clock = esdhc_of_set_clock,
	.enable_dma = esdhc_of_enable_dma,
	.get_max_clock = esdhc_of_get_max_clock,
	.get_min_clock = esdhc_of_get_min_clock,
	.adma_workaround = esdhc_of_adma_workaround,
	.set_bus_width = esdhc_pltfm_set_bus_width,
	.reset = esdhc_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
};

static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
		| SDHCI_QUIRK_NO_CARD_NO_RESET
		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
	.ops = &sdhci_esdhc_be_ops,
};

static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
579
	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
J
Jerry Huang 已提交
580 581
		| SDHCI_QUIRK_NO_CARD_NO_RESET
		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
582
	.ops = &sdhci_esdhc_le_ops,
583
};
584

585 586 587 588 589 590
static struct soc_device_attribute soc_incorrect_hostver[] = {
	{ .family = "QorIQ T4240", .revision = "1.0", },
	{ .family = "QorIQ T4240", .revision = "2.0", },
	{ },
};

591 592 593 594 595 596 597
static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
{
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_esdhc *esdhc;
	u16 host_ver;

	pltfm_host = sdhci_priv(host);
598
	esdhc = sdhci_pltfm_priv(pltfm_host);
599 600 601 602 603

	host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
	esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
			     SDHCI_VENDOR_VER_SHIFT;
	esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
604 605 606 607
	if (soc_device_match(soc_incorrect_hostver))
		esdhc->quirk_incorrect_hostver = true;
	else
		esdhc->quirk_incorrect_hostver = false;
608 609
}

B
Bill Pemberton 已提交
610
static int sdhci_esdhc_probe(struct platform_device *pdev)
611
{
612
	struct sdhci_host *host;
613
	struct device_node *np;
614 615
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_esdhc *esdhc;
616 617
	int ret;

618 619
	np = pdev->dev.of_node;

620
	if (of_property_read_bool(np, "little-endian"))
621 622
		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata,
					sizeof(struct sdhci_esdhc));
623
	else
624 625
		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata,
					sizeof(struct sdhci_esdhc));
626

627 628 629
	if (IS_ERR(host))
		return PTR_ERR(host);

630 631
	esdhc_init(pdev, host);

632 633
	sdhci_get_of_property(pdev);

634
	pltfm_host = sdhci_priv(host);
635
	esdhc = sdhci_pltfm_priv(pltfm_host);
636 637 638 639 640 641
	if (esdhc->vendor_ver == VENDOR_V_22)
		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;

	if (esdhc->vendor_ver > VENDOR_V_22)
		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;

642 643 644 645
	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
646 647
	    of_device_is_compatible(np, "fsl,t1040-esdhc") ||
	    of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
648 649
		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;

650 651 652
	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

653 654 655 656 657 658 659 660
	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
		/*
		 * Freescale messed up with P2020 as it has a non-standard
		 * host control register
		 */
		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
	}

661
	/* call to generic mmc_of_parse to support additional capabilities */
662 663 664 665
	ret = mmc_of_parse(host->mmc);
	if (ret)
		goto err;

666
	mmc_of_parse_voltage(np, &host->ocr_mask);
667 668 669

	ret = sdhci_add_host(host);
	if (ret)
670
		goto err;
671

672 673 674
	return 0;
 err:
	sdhci_pltfm_free(pdev);
675
	return ret;
676 677 678 679 680 681 682 683 684 685 686 687 688 689
}

static const struct of_device_id sdhci_esdhc_of_match[] = {
	{ .compatible = "fsl,mpc8379-esdhc" },
	{ .compatible = "fsl,mpc8536-esdhc" },
	{ .compatible = "fsl,esdhc" },
	{ }
};
MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);

static struct platform_driver sdhci_esdhc_driver = {
	.driver = {
		.name = "sdhci-esdhc",
		.of_match_table = sdhci_esdhc_of_match,
690
		.pm = &esdhc_of_dev_pm_ops,
691 692
	},
	.probe = sdhci_esdhc_probe,
693
	.remove = sdhci_pltfm_unregister,
694 695
};

696
module_platform_driver(sdhci_esdhc_driver);
697 698 699 700 701

MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL v2");