soc-jack.c 9.7 KB
Newer Older
M
Mark Brown 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
/*
 * soc-jack.c  --  ALSA SoC jack handling
 *
 * Copyright 2008 Wolfson Microelectronics PLC.
 *
 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 */

#include <sound/jack.h>
#include <sound/soc.h>
16
#include <linux/gpio.h>
17
#include <linux/gpio/consumer.h>
18 19 20
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
21
#include <linux/export.h>
22
#include <trace/events/asoc.h>
M
Mark Brown 已提交
23 24 25

/**
 * snd_soc_jack_new - Create a new jack
26
 * @codec: ASoC codec
M
Mark Brown 已提交
27 28 29 30 31 32 33 34 35 36
 * @id:    an identifying string for this jack
 * @type:  a bitmask of enum snd_jack_type values that can be detected by
 *         this jack
 * @jack:  structure to use for the jack
 *
 * Creates a new jack object.
 *
 * Returns zero if successful, or a negative error code on failure.
 * On success jack will be initialised.
 */
37
int snd_soc_jack_new(struct snd_soc_codec *codec, const char *id, int type,
M
Mark Brown 已提交
38 39
		     struct snd_soc_jack *jack)
{
40
	mutex_init(&jack->mutex);
41
	jack->codec = codec;
M
Mark Brown 已提交
42
	INIT_LIST_HEAD(&jack->pins);
43
	INIT_LIST_HEAD(&jack->jack_zones);
44
	BLOCKING_INIT_NOTIFIER_HEAD(&jack->notifier);
M
Mark Brown 已提交
45

46
	return snd_jack_new(codec->card->snd_card, id, type, &jack->jack);
M
Mark Brown 已提交
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
}
EXPORT_SYMBOL_GPL(snd_soc_jack_new);

/**
 * snd_soc_jack_report - Report the current status for a jack
 *
 * @jack:   the jack
 * @status: a bitmask of enum snd_jack_type values that are currently detected.
 * @mask:   a bitmask of enum snd_jack_type values that being reported.
 *
 * If configured using snd_soc_jack_add_pins() then the associated
 * DAPM pins will be enabled or disabled as appropriate and DAPM
 * synchronised.
 *
 * Note: This function uses mutexes and should be called from a
 * context which can sleep (such as a workqueue).
 */
void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
{
66
	struct snd_soc_codec *codec;
L
Liam Girdwood 已提交
67
	struct snd_soc_dapm_context *dapm;
M
Mark Brown 已提交
68
	struct snd_soc_jack_pin *pin;
69
	unsigned int sync = 0;
M
Mark Brown 已提交
70 71
	int enable;

72 73
	trace_snd_soc_jack_report(jack, mask, status);

M
Mark Brown 已提交
74
	if (!jack)
M
Mark Brown 已提交
75
		return;
M
Mark Brown 已提交
76

77
	codec = jack->codec;
L
Liam Girdwood 已提交
78
	dapm =  &codec->dapm;
M
Mark Brown 已提交
79

80
	mutex_lock(&jack->mutex);
M
Mark Brown 已提交
81 82

	jack->status &= ~mask;
83
	jack->status |= status & mask;
M
Mark Brown 已提交
84

85 86
	trace_snd_soc_jack_notify(jack, status);

M
Mark Brown 已提交
87
	list_for_each_entry(pin, &jack->pins, list) {
88
		enable = pin->mask & jack->status;
M
Mark Brown 已提交
89 90 91 92 93

		if (pin->invert)
			enable = !enable;

		if (enable)
L
Liam Girdwood 已提交
94
			snd_soc_dapm_enable_pin(dapm, pin->pin);
M
Mark Brown 已提交
95
		else
L
Liam Girdwood 已提交
96
			snd_soc_dapm_disable_pin(dapm, pin->pin);
97 98 99

		/* we need to sync for this case only */
		sync = 1;
M
Mark Brown 已提交
100 101
	}

102
	/* Report before the DAPM sync to help users updating micbias status */
103
	blocking_notifier_call_chain(&jack->notifier, jack->status, jack);
104

105 106
	if (sync)
		snd_soc_dapm_sync(dapm);
M
Mark Brown 已提交
107

108
	snd_jack_report(jack->jack, jack->status);
M
Mark Brown 已提交
109

110
	mutex_unlock(&jack->mutex);
M
Mark Brown 已提交
111 112 113
}
EXPORT_SYMBOL_GPL(snd_soc_jack_report);

114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138
/**
 * snd_soc_jack_add_zones - Associate voltage zones with jack
 *
 * @jack:  ASoC jack
 * @count: Number of zones
 * @zone:  Array of zones
 *
 * After this function has been called the zones specified in the
 * array will be associated with the jack.
 */
int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
			  struct snd_soc_jack_zone *zones)
{
	int i;

	for (i = 0; i < count; i++) {
		INIT_LIST_HEAD(&zones[i].list);
		list_add(&(zones[i].list), &jack->jack_zones);
	}
	return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones);

/**
 * snd_soc_jack_get_type - Based on the mic bias value, this function returns
139
 * the type of jack from the zones declared in the jack type
140
 *
141
 * @jack:  ASoC jack
142 143 144
 * @micbias_voltage:  mic bias voltage at adc channel when jack is plugged in
 *
 * Based on the mic bias value passed, this function helps identify
145
 * the type of jack from the already declared jack zones
146 147 148 149 150 151 152 153 154 155 156 157 158 159
 */
int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage)
{
	struct snd_soc_jack_zone *zone;

	list_for_each_entry(zone, &jack->jack_zones, list) {
		if (micbias_voltage >= zone->min_mv &&
			micbias_voltage < zone->max_mv)
				return zone->jack_type;
	}
	return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_get_type);

M
Mark Brown 已提交
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177
/**
 * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
 *
 * @jack:  ASoC jack
 * @count: Number of pins
 * @pins:  Array of pins
 *
 * After this function has been called the DAPM pins specified in the
 * pins array will have their status updated to reflect the current
 * state of the jack whenever the jack status is updated.
 */
int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
			  struct snd_soc_jack_pin *pins)
{
	int i;

	for (i = 0; i < count; i++) {
		if (!pins[i].pin) {
178 179
			dev_err(jack->codec->dev, "ASoC: No name for pin %d\n",
				i);
M
Mark Brown 已提交
180 181 182
			return -EINVAL;
		}
		if (!pins[i].mask) {
183 184
			dev_err(jack->codec->dev, "ASoC: No mask for pin %d"
				" (%s)\n", i, pins[i].pin);
M
Mark Brown 已提交
185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
			return -EINVAL;
		}

		INIT_LIST_HEAD(&pins[i].list);
		list_add(&(pins[i].list), &jack->pins);
	}

	/* Update to reflect the last reported status; canned jack
	 * implementations are likely to set their state before the
	 * card has an opportunity to associate pins.
	 */
	snd_soc_jack_report(jack, 0, 0);

	return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins);
201

202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235
/**
 * snd_soc_jack_notifier_register - Register a notifier for jack status
 *
 * @jack:  ASoC jack
 * @nb:    Notifier block to register
 *
 * Register for notification of the current status of the jack.  Note
 * that it is not possible to report additional jack events in the
 * callback from the notifier, this is intended to support
 * applications such as enabling electrical detection only when a
 * mechanical detection event has occurred.
 */
void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
				    struct notifier_block *nb)
{
	blocking_notifier_chain_register(&jack->notifier, nb);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_register);

/**
 * snd_soc_jack_notifier_unregister - Unregister a notifier for jack status
 *
 * @jack:  ASoC jack
 * @nb:    Notifier block to unregister
 *
 * Stop notifying for status changes.
 */
void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
				      struct notifier_block *nb)
{
	blocking_notifier_chain_unregister(&jack->notifier, nb);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_unregister);

236 237
#ifdef CONFIG_GPIOLIB
/* gpio detect */
238
static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio)
239 240 241 242 243
{
	struct snd_soc_jack *jack = gpio->jack;
	int enable;
	int report;

244
	enable = gpiod_get_value_cansleep(gpio->desc);
245 246 247 248 249 250 251 252
	if (gpio->invert)
		enable = !enable;

	if (enable)
		report = gpio->report;
	else
		report = 0;

253
	if (gpio->jack_status_check)
254
		report = gpio->jack_status_check(gpio->data);
255

256 257 258 259 260 261 262
	snd_soc_jack_report(jack, report, gpio->report);
}

/* irq handler for gpio pin */
static irqreturn_t gpio_handler(int irq, void *data)
{
	struct snd_soc_jack_gpio *gpio = data;
263 264
	struct device *dev = gpio->jack->codec->card->dev;

265 266
	trace_snd_soc_jack_irq(gpio->name);

267 268
	if (device_may_wakeup(dev))
		pm_wakeup_event(dev, gpio->debounce_time + 50);
269

270
	queue_delayed_work(system_power_efficient_wq, &gpio->work,
271
			      msecs_to_jiffies(gpio->debounce_time));
272 273 274 275 276 277 278 279 280

	return IRQ_HANDLED;
}

/* gpio work */
static void gpio_work(struct work_struct *work)
{
	struct snd_soc_jack_gpio *gpio;

281
	gpio = container_of(work, struct snd_soc_jack_gpio, work.work);
282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301
	snd_soc_jack_gpio_detect(gpio);
}

/**
 * snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack
 *
 * @jack:  ASoC jack
 * @count: number of pins
 * @gpios: array of gpio pins
 *
 * This function will request gpio, set data direction and request irq
 * for each gpio in the array.
 */
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
			struct snd_soc_jack_gpio *gpios)
{
	int i, ret;

	for (i = 0; i < count; i++) {
		if (!gpio_is_valid(gpios[i].gpio)) {
302
			dev_err(jack->codec->dev, "ASoC: Invalid gpio %d\n",
303 304 305 306 307
				gpios[i].gpio);
			ret = -EINVAL;
			goto undo;
		}
		if (!gpios[i].name) {
308
			dev_err(jack->codec->dev, "ASoC: No name for gpio %d\n",
309 310 311 312 313 314 315 316 317
				gpios[i].gpio);
			ret = -EINVAL;
			goto undo;
		}

		ret = gpio_request(gpios[i].gpio, gpios[i].name);
		if (ret)
			goto undo;

318 319 320
		gpios[i].desc = gpio_to_desc(gpios[i].gpio);

		ret = gpiod_direction_input(gpios[i].desc);
321 322 323
		if (ret)
			goto err;

324
		INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
325 326
		gpios[i].jack = jack;

327
		ret = request_any_context_irq(gpiod_to_irq(gpios[i].desc),
328 329 330
					      gpio_handler,
					      IRQF_TRIGGER_RISING |
					      IRQF_TRIGGER_FALLING,
331
					      gpios[i].name,
332
					      &gpios[i]);
333
		if (ret < 0)
334 335
			goto err;

336
		if (gpios[i].wake) {
337
			ret = irq_set_irq_wake(gpiod_to_irq(gpios[i].desc), 1);
338
			if (ret != 0)
339
				dev_err(jack->codec->dev, "ASoC: "
340 341 342 343
				  "Failed to mark GPIO %d as wake source: %d\n",
					gpios[i].gpio, ret);
		}

344
		/* Expose GPIO value over sysfs for diagnostic purposes */
345
		gpiod_export(gpios[i].desc, false);
346 347

		/* Update initial jack status */
348 349
		schedule_delayed_work(&gpios[i].work,
				      msecs_to_jiffies(gpios[i].debounce_time));
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377
	}

	return 0;

err:
	gpio_free(gpios[i].gpio);
undo:
	snd_soc_jack_free_gpios(jack, i, gpios);

	return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios);

/**
 * snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
 *
 * @jack:  ASoC jack
 * @count: number of pins
 * @gpios: array of gpio pins
 *
 * Release gpio and irq resources for gpio pins associated with an ASoC jack.
 */
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
			struct snd_soc_jack_gpio *gpios)
{
	int i;

	for (i = 0; i < count; i++) {
378 379
		gpiod_unexport(gpios[i].desc);
		free_irq(gpiod_to_irq(gpios[i].desc), &gpios[i]);
380
		cancel_delayed_work_sync(&gpios[i].work);
381
		gpiod_put(gpios[i].desc);
382 383 384 385 386
		gpios[i].jack = NULL;
	}
}
EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios);
#endif	/* CONFIG_GPIOLIB */