dvb_frontend.c

/*
 * dvb_frontend.c: DVB frontend tuning interface/thread
 *
 *
 * Copyright (C) 1999-2001 Ralph  Metzler
 *			   Marcus Metzler
 *			   Holger Waechtler
 *				      for convergence integrated media GmbH
 *
 * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 */

#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/list.h>
#include <linux/suspend.h>
#include <linux/jiffies.h>
#include <asm/processor.h>

#include "dvb_frontend.h"
#include "dvbdev.h"

static int dvb_frontend_debug;
static int dvb_shutdown_timeout = 5;
static int dvb_force_auto_inversion;
static int dvb_override_tune_delay;
static int dvb_powerdown_on_sleep = 1;

module_param_named(frontend_debug, dvb_frontend_debug, int, 0644);
MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off).");
module_param(dvb_shutdown_timeout, int, 0644);
MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware");
module_param(dvb_force_auto_inversion, int, 0644);
MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always");
module_param(dvb_override_tune_delay, int, 0644);
MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt");
module_param(dvb_powerdown_on_sleep, int, 0644);
MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)");

#define dprintk if (dvb_frontend_debug) printk

#define FESTATE_IDLE 1
#define FESTATE_RETUNE 2
#define FESTATE_TUNING_FAST 4
#define FESTATE_TUNING_SLOW 8
#define FESTATE_TUNED 16
#define FESTATE_ZIGZAG_FAST 32
#define FESTATE_ZIGZAG_SLOW 64
#define FESTATE_DISEQC 128
#define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC)
#define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST)
#define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW)
#define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW)

#define FE_ALGO_HW		1
/*
 * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling.
 * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune.
 * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress.
 * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower.
 * FESTATE_TUNED. The frontend has successfully locked on.
 * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it.
 * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower.
 * FESTATE_DISEQC. A DISEQC command has just been issued.
 * FESTATE_WAITFORLOCK. When we're waiting for a lock.
 * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan.
 * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan.
 * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again.
 */

static DEFINE_MUTEX(frontend_mutex);

struct dvb_frontend_private {

	/* thread/frontend values */
	struct dvb_device *dvbdev;
	struct dvb_frontend_parameters parameters;
	struct dvb_fe_events events;
	struct semaphore sem;
	struct list_head list_head;
	wait_queue_head_t wait_queue;
	pid_t thread_pid;
	unsigned long release_jiffies;
	unsigned int exit;
	unsigned int wakeup;
	fe_status_t status;
	unsigned long tune_mode_flags;
	unsigned int delay;
	unsigned int reinitialise;
	int tone;
	int voltage;

	/* swzigzag values */
	unsigned int state;
	unsigned int bending;
	int lnb_drift;
	unsigned int inversion;
	unsigned int auto_step;
	unsigned int auto_sub_step;
	unsigned int started_auto_step;
	unsigned int min_delay;
	unsigned int max_drift;
	unsigned int step_size;
	int quality;
	unsigned int check_wrapped;
};

static void dvb_frontend_wakeup(struct dvb_frontend *fe);

static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	struct dvb_fe_events *events = &fepriv->events;
	struct dvb_frontend_event *e;
	int wp;

	dprintk ("%s\n", __FUNCTION__);

	if (down_interruptible (&events->sem))
		return;

	wp = (events->eventw + 1) % MAX_EVENT;

	if (wp == events->eventr) {
		events->overflow = 1;
		events->eventr = (events->eventr + 1) % MAX_EVENT;
	}

	e = &events->events[events->eventw];

	memcpy (&e->parameters, &fepriv->parameters,
		sizeof (struct dvb_frontend_parameters));

	if (status & FE_HAS_LOCK)
		if (fe->ops.get_frontend)
			fe->ops.get_frontend(fe, &e->parameters);

	events->eventw = wp;

	up (&events->sem);

	e->status = status;

	wake_up_interruptible (&events->wait_queue);
}

static int dvb_frontend_get_event(struct dvb_frontend *fe,
			    struct dvb_frontend_event *event, int flags)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	struct dvb_fe_events *events = &fepriv->events;

	dprintk ("%s\n", __FUNCTION__);

	if (events->overflow) {
		events->overflow = 0;
		return -EOVERFLOW;
	}

	if (events->eventw == events->eventr) {
		int ret;

		if (flags & O_NONBLOCK)
			return -EWOULDBLOCK;

		up(&fepriv->sem);

		ret = wait_event_interruptible (events->wait_queue,
						events->eventw != events->eventr);

		if (down_interruptible (&fepriv->sem))
			return -ERESTARTSYS;

		if (ret < 0)
			return ret;
	}

	if (down_interruptible (&events->sem))
		return -ERESTARTSYS;

	memcpy (event, &events->events[events->eventr],
		sizeof(struct dvb_frontend_event));

	events->eventr = (events->eventr + 1) % MAX_EVENT;

	up (&events->sem);

	return 0;
}

static void dvb_frontend_init(struct dvb_frontend *fe)
{
	dprintk ("DVB: initialising frontend %i (%s)...\n",
		 fe->dvb->num,
		 fe->ops.info.name);

	if (fe->ops.init)
		fe->ops.init(fe);
	if (fe->ops.tuner_ops.init) {
		fe->ops.tuner_ops.init(fe);
		if (fe->ops.i2c_gate_ctrl)
			fe->ops.i2c_gate_ctrl(fe, 0);
	}
}

void dvb_frontend_reinitialise(struct dvb_frontend *fe)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	fepriv->reinitialise = 1;
	dvb_frontend_wakeup(fe);
}
EXPORT_SYMBOL(dvb_frontend_reinitialise);

static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked)
{
	int q2;

	dprintk ("%s\n", __FUNCTION__);

	if (locked)
		(fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256;
	else
		(fepriv->quality) = (fepriv->quality * 220 + 0) / 256;

	q2 = fepriv->quality - 128;
	q2 *= q2;

	fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128);
}

/**
 * Performs automatic twiddling of frontend parameters.
 *
 * @param fe The frontend concerned.
 * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT
 * @returns Number of complete iterations that have been performed.
 */
static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped)
{
	int autoinversion;
	int ready = 0;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	int original_inversion = fepriv->parameters.inversion;
	u32 original_frequency = fepriv->parameters.frequency;

	/* are we using autoinversion? */
	autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
			 (fepriv->parameters.inversion == INVERSION_AUTO));

	/* setup parameters correctly */
	while(!ready) {
		/* calculate the lnb_drift */
		fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size;

		/* wrap the auto_step if we've exceeded the maximum drift */
		if (fepriv->lnb_drift > fepriv->max_drift) {
			fepriv->auto_step = 0;
			fepriv->auto_sub_step = 0;
			fepriv->lnb_drift = 0;
		}

		/* perform inversion and +/- zigzag */
		switch(fepriv->auto_sub_step) {
		case 0:
			/* try with the current inversion and current drift setting */
			ready = 1;
			break;

		case 1:
			if (!autoinversion) break;

			fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF;
			ready = 1;
			break;

		case 2:
			if (fepriv->lnb_drift == 0) break;

			fepriv->lnb_drift = -fepriv->lnb_drift;
			ready = 1;
			break;

		case 3:
			if (fepriv->lnb_drift == 0) break;
			if (!autoinversion) break;

			fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF;
			fepriv->lnb_drift = -fepriv->lnb_drift;
			ready = 1;
			break;

		default:
			fepriv->auto_step++;
			fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */
			break;
		}

		if (!ready) fepriv->auto_sub_step++;
	}

	/* if this attempt would hit where we started, indicate a complete
	 * iteration has occurred */
	if ((fepriv->auto_step == fepriv->started_auto_step) &&
	    (fepriv->auto_sub_step == 0) && check_wrapped) {
		return 1;
	}

	dprintk("%s: drift:%i inversion:%i auto_step:%i "
		"auto_sub_step:%i started_auto_step:%i\n",
		__FUNCTION__, fepriv->lnb_drift, fepriv->inversion,
		fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step);

	/* set the frontend itself */
	fepriv->parameters.frequency += fepriv->lnb_drift;
	if (autoinversion)
		fepriv->parameters.inversion = fepriv->inversion;
	if (fe->ops.set_frontend)
		fe->ops.set_frontend(fe, &fepriv->parameters);

	fepriv->parameters.frequency = original_frequency;
	fepriv->parameters.inversion = original_inversion;

	fepriv->auto_sub_step++;
	return 0;
}

static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
{
	fe_status_t s;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	/* if we've got no parameters, just keep idling */
	if (fepriv->state & FESTATE_IDLE) {
		fepriv->delay = 3*HZ;
		fepriv->quality = 0;
		return;
	}

	/* in SCAN mode, we just set the frontend when asked and leave it alone */
	if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) {
		if (fepriv->state & FESTATE_RETUNE) {
			if (fe->ops.set_frontend)
				fe->ops.set_frontend(fe, &fepriv->parameters);
			fepriv->state = FESTATE_TUNED;
		}
		fepriv->delay = 3*HZ;
		fepriv->quality = 0;
		return;
	}

	/* get the frontend status */
	if (fepriv->state & FESTATE_RETUNE) {
		s = 0;
	} else {
		if (fe->ops.read_status)
			fe->ops.read_status(fe, &s);
		if (s != fepriv->status) {
			dvb_frontend_add_event(fe, s);
			fepriv->status = s;
		}
	}

	/* if we're not tuned, and we have a lock, move to the TUNED state */
	if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) {
		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
		fepriv->state = FESTATE_TUNED;

		/* if we're tuned, then we have determined the correct inversion */
		if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
		    (fepriv->parameters.inversion == INVERSION_AUTO)) {
			fepriv->parameters.inversion = fepriv->inversion;
		}
		return;
	}

	/* if we are tuned already, check we're still locked */
	if (fepriv->state & FESTATE_TUNED) {
		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);

		/* we're tuned, and the lock is still good... */
		if (s & FE_HAS_LOCK) {
			return;
		} else { /* if we _WERE_ tuned, but now don't have a lock */
			fepriv->state = FESTATE_ZIGZAG_FAST;
			fepriv->started_auto_step = fepriv->auto_step;
			fepriv->check_wrapped = 0;
		}
	}

	/* don't actually do anything if we're in the LOSTLOCK state,
	 * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */
	if ((fepriv->state & FESTATE_LOSTLOCK) &&
	    (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) {
		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
		return;
	}

	/* don't do anything if we're in the DISEQC state, since this
	 * might be someone with a motorized dish controlled by DISEQC.
	 * If its actually a re-tune, there will be a SET_FRONTEND soon enough.	*/
	if (fepriv->state & FESTATE_DISEQC) {
		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);
		return;
	}

	/* if we're in the RETUNE state, set everything up for a brand
	 * new scan, keeping the current inversion setting, as the next
	 * tune is _very_ likely to require the same */
	if (fepriv->state & FESTATE_RETUNE) {
		fepriv->lnb_drift = 0;
		fepriv->auto_step = 0;
		fepriv->auto_sub_step = 0;
		fepriv->started_auto_step = 0;
		fepriv->check_wrapped = 0;
	}

	/* fast zigzag. */
	if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) {
		fepriv->delay = fepriv->min_delay;

		/* peform a tune */
		if (dvb_frontend_swzigzag_autotune(fe, fepriv->check_wrapped)) {
			/* OK, if we've run out of trials at the fast speed.
			 * Drop back to slow for the _next_ attempt */
			fepriv->state = FESTATE_SEARCHING_SLOW;
			fepriv->started_auto_step = fepriv->auto_step;
			return;
		}
		fepriv->check_wrapped = 1;

		/* if we've just retuned, enter the ZIGZAG_FAST state.
		 * This ensures we cannot return from an
		 * FE_SET_FRONTEND ioctl before the first frontend tune
		 * occurs */
		if (fepriv->state & FESTATE_RETUNE) {
			fepriv->state = FESTATE_TUNING_FAST;
		}
	}

	/* slow zigzag */
	if (fepriv->state & FESTATE_SEARCHING_SLOW) {
		dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK);

		/* Note: don't bother checking for wrapping; we stay in this
		 * state until we get a lock */
		dvb_frontend_swzigzag_autotune(fe, 0);
	}
}

static int dvb_frontend_is_exiting(struct dvb_frontend *fe)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	if (fepriv->exit)
		return 1;

	if (fepriv->dvbdev->writers == 1)
		if (time_after(jiffies, fepriv->release_jiffies +
				  dvb_shutdown_timeout * HZ))
			return 1;

	return 0;
}

static int dvb_frontend_should_wakeup(struct dvb_frontend *fe)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	if (fepriv->wakeup) {
		fepriv->wakeup = 0;
		return 1;
	}
	return dvb_frontend_is_exiting(fe);
}

static void dvb_frontend_wakeup(struct dvb_frontend *fe)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	fepriv->wakeup = 1;
	wake_up_interruptible(&fepriv->wait_queue);
}

static int dvb_frontend_thread(void *data)
{
	struct dvb_frontend *fe = data;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	unsigned long timeout;
	char name [15];
	fe_status_t s;
	struct dvb_frontend_parameters *params;

	dprintk("%s\n", __FUNCTION__);

	snprintf (name, sizeof(name), "kdvb-fe-%i", fe->dvb->num);

	lock_kernel();
	daemonize(name);
	sigfillset(&current->blocked);
	unlock_kernel();

	fepriv->check_wrapped = 0;
	fepriv->quality = 0;
	fepriv->delay = 3*HZ;
	fepriv->status = 0;
	fepriv->wakeup = 0;
	fepriv->reinitialise = 0;

	dvb_frontend_init(fe);

	while (1) {
		up(&fepriv->sem);	    /* is locked when we enter the thread... */

		timeout = wait_event_interruptible_timeout(fepriv->wait_queue,
							   dvb_frontend_should_wakeup(fe),
							   fepriv->delay);
		if (0 != dvb_frontend_is_exiting(fe)) {
			/* got signal or quitting */
			break;
		}

		try_to_freeze();

		if (down_interruptible(&fepriv->sem))
			break;

		if (fepriv->reinitialise) {
			dvb_frontend_init(fe);
			if (fepriv->tone != -1) {
				fe->ops.set_tone(fe, fepriv->tone);
			}
			if (fepriv->voltage != -1) {
				fe->ops.set_voltage(fe, fepriv->voltage);
			}
			fepriv->reinitialise = 0;
		}

		/* do an iteration of the tuning loop */
		if (fe->ops.get_frontend_algo) {
			if (fe->ops.get_frontend_algo(fe) == FE_ALGO_HW) {
				/* have we been asked to retune? */
				params = NULL;
				if (fepriv->state & FESTATE_RETUNE) {
					params = &fepriv->parameters;
					fepriv->state = FESTATE_TUNED;
				}

				fe->ops.tune(fe, params, fepriv->tune_mode_flags, &fepriv->delay, &s);
				if (s != fepriv->status) {
					dvb_frontend_add_event(fe, s);
					fepriv->status = s;
				}
			} else
				dvb_frontend_swzigzag(fe);
		} else
			dvb_frontend_swzigzag(fe);
	}

	if (dvb_shutdown_timeout) {
		if (dvb_powerdown_on_sleep)
			if (fe->ops.set_voltage)
				fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
		if (fe->ops.tuner_ops.sleep) {
			fe->ops.tuner_ops.sleep(fe);
			if (fe->ops.i2c_gate_ctrl)
				fe->ops.i2c_gate_ctrl(fe, 0);
		}
		if (fe->ops.sleep)
			fe->ops.sleep(fe);
	}

	fepriv->thread_pid = 0;
	mb();

	dvb_frontend_wakeup(fe);
	return 0;
}

static void dvb_frontend_stop(struct dvb_frontend *fe)
{
	unsigned long ret;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	dprintk ("%s\n", __FUNCTION__);

	fepriv->exit = 1;
	mb();

	if (!fepriv->thread_pid)
		return;

	/* check if the thread is really alive */
	if (kill_proc(fepriv->thread_pid, 0, 1) == -ESRCH) {
		printk("dvb_frontend_stop: thread PID %d already died\n",
				fepriv->thread_pid);
		/* make sure the mutex was not held by the thread */
		init_MUTEX (&fepriv->sem);
		return;
	}

	/* wake up the frontend thread, so it notices that fe->exit == 1 */
	dvb_frontend_wakeup(fe);

	/* wait until the frontend thread has exited */
	ret = wait_event_interruptible(fepriv->wait_queue,0 == fepriv->thread_pid);
	if (-ERESTARTSYS != ret) {
		fepriv->state = FESTATE_IDLE;
		return;
	}
	fepriv->state = FESTATE_IDLE;

	/* paranoia check in case a signal arrived */
	if (fepriv->thread_pid)
		printk("dvb_frontend_stop: warning: thread PID %d won't exit\n",
				fepriv->thread_pid);
}

s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime)
{
	return ((curtime.tv_usec < lasttime.tv_usec) ?
		1000000 - lasttime.tv_usec + curtime.tv_usec :
		curtime.tv_usec - lasttime.tv_usec);
}
EXPORT_SYMBOL(timeval_usec_diff);

static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec)
{
	curtime->tv_usec += add_usec;
	if (curtime->tv_usec >= 1000000) {
		curtime->tv_usec -= 1000000;
		curtime->tv_sec++;
	}
}

/*
 * Sleep until gettimeofday() > waketime + add_usec
 * This needs to be as precise as possible, but as the delay is
 * usually between 2ms and 32ms, it is done using a scheduled msleep
 * followed by usleep (normally a busy-wait loop) for the remainder
 */
void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec)
{
	struct timeval lasttime;
	s32 delta, newdelta;

	timeval_usec_add(waketime, add_usec);

	do_gettimeofday(&lasttime);
	delta = timeval_usec_diff(lasttime, *waketime);
	if (delta > 2500) {
		msleep((delta - 1500) / 1000);
		do_gettimeofday(&lasttime);
		newdelta = timeval_usec_diff(lasttime, *waketime);
		delta = (newdelta > delta) ? 0 : newdelta;
	}
	if (delta > 0)
		udelay(delta);
}
EXPORT_SYMBOL(dvb_frontend_sleep_until);

static int dvb_frontend_start(struct dvb_frontend *fe)
{
	int ret;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	dprintk ("%s\n", __FUNCTION__);

	if (fepriv->thread_pid) {
		if (!fepriv->exit)
			return 0;
		else
			dvb_frontend_stop (fe);
	}

	if (signal_pending(current))
		return -EINTR;
	if (down_interruptible (&fepriv->sem))
		return -EINTR;

	fepriv->state = FESTATE_IDLE;
	fepriv->exit = 0;
	fepriv->thread_pid = 0;
	mb();

	ret = kernel_thread (dvb_frontend_thread, fe, 0);

	if (ret < 0) {
		printk("dvb_frontend_start: failed to start kernel_thread (%d)\n", ret);
		up(&fepriv->sem);
		return ret;
	}
	fepriv->thread_pid = ret;

	return 0;
}

static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
			unsigned int cmd, void *parg)
{
	struct dvb_device *dvbdev = file->private_data;
	struct dvb_frontend *fe = dvbdev->priv;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	int err = -EOPNOTSUPP;

	dprintk ("%s\n", __FUNCTION__);

	if (!fe || fepriv->exit)
		return -ENODEV;

	if ((file->f_flags & O_ACCMODE) == O_RDONLY &&
	    (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT ||
	     cmd == FE_DISEQC_RECV_SLAVE_REPLY))
		return -EPERM;

	if (down_interruptible (&fepriv->sem))
		return -ERESTARTSYS;

	switch (cmd) {
	case FE_GET_INFO: {
		struct dvb_frontend_info* info = parg;
		memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info));

		/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
		 * do it, it is done for it. */
		info->caps |= FE_CAN_INVERSION_AUTO;
		err = 0;
		break;
	}

	case FE_READ_STATUS: {
		fe_status_t* status = parg;

		/* if retune was requested but hasn't occured yet, prevent
		 * that user get signal state from previous tuning */
		if(fepriv->state == FESTATE_RETUNE) {
			err=0;
			*status = 0;
			break;
		}

		if (fe->ops.read_status)
			err = fe->ops.read_status(fe, status);
		break;
	}
	case FE_READ_BER:
		if (fe->ops.read_ber)
			err = fe->ops.read_ber(fe, (__u32*) parg);
		break;

	case FE_READ_SIGNAL_STRENGTH:
		if (fe->ops.read_signal_strength)
			err = fe->ops.read_signal_strength(fe, (__u16*) parg);
		break;

	case FE_READ_SNR:
		if (fe->ops.read_snr)
			err = fe->ops.read_snr(fe, (__u16*) parg);
		break;

	case FE_READ_UNCORRECTED_BLOCKS:
		if (fe->ops.read_ucblocks)
			err = fe->ops.read_ucblocks(fe, (__u32*) parg);
		break;


	case FE_DISEQC_RESET_OVERLOAD:
		if (fe->ops.diseqc_reset_overload) {
			err = fe->ops.diseqc_reset_overload(fe);
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_DISEQC_SEND_MASTER_CMD:
		if (fe->ops.diseqc_send_master_cmd) {
			err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg);
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_DISEQC_SEND_BURST:
		if (fe->ops.diseqc_send_burst) {
			err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg);
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_SET_TONE:
		if (fe->ops.set_tone) {
			err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg);
			fepriv->tone = (fe_sec_tone_mode_t) parg;
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_SET_VOLTAGE:
		if (fe->ops.set_voltage) {
			err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg);
			fepriv->voltage = (fe_sec_voltage_t) parg;
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_DISHNETWORK_SEND_LEGACY_CMD:
		if (fe->ops.dishnetwork_send_legacy_command) {
			err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg);
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		} else if (fe->ops.set_voltage) {
			/*
			 * NOTE: This is a fallback condition.  Some frontends
			 * (stv0299 for instance) take longer than 8msec to
			 * respond to a set_voltage command.  Those switches
			 * need custom routines to switch properly.  For all
			 * other frontends, the following shoule work ok.
			 * Dish network legacy switches (as used by Dish500)
			 * are controlled by sending 9-bit command words
			 * spaced 8msec apart.
			 * the actual command word is switch/port dependant
			 * so it is up to the userspace application to send
			 * the right command.
			 * The command must always start with a '0' after
			 * initialization, so parg is 8 bits and does not
			 * include the initialization or start bit
			 */
			unsigned long cmd = ((unsigned long) parg) << 1;
			struct timeval nexttime;
			struct timeval tv[10];
			int i;
			u8 last = 1;
			if (dvb_frontend_debug)
				printk("%s switch command: 0x%04lx\n", __FUNCTION__, cmd);
			do_gettimeofday(&nexttime);
			if (dvb_frontend_debug)
				memcpy(&tv[0], &nexttime, sizeof(struct timeval));
			/* before sending a command, initialize by sending
			 * a 32ms 18V to the switch
			 */
			fe->ops.set_voltage(fe, SEC_VOLTAGE_18);
			dvb_frontend_sleep_until(&nexttime, 32000);

			for (i = 0; i < 9; i++) {
				if (dvb_frontend_debug)
					do_gettimeofday(&tv[i + 1]);
				if ((cmd & 0x01) != last) {
					/* set voltage to (last ? 13V : 18V) */
					fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
					last = (last) ? 0 : 1;
				}
				cmd = cmd >> 1;
				if (i != 8)
					dvb_frontend_sleep_until(&nexttime, 8000);
			}
			if (dvb_frontend_debug) {
				printk("%s(%d): switch delay (should be 32k followed by all 8k\n",
					__FUNCTION__, fe->dvb->num);
				for (i = 1; i < 10; i++)
					printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i]));
			}
			err = 0;
			fepriv->state = FESTATE_DISEQC;
			fepriv->status = 0;
		}
		break;

	case FE_DISEQC_RECV_SLAVE_REPLY:
		if (fe->ops.diseqc_recv_slave_reply)
			err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
		break;

	case FE_ENABLE_HIGH_LNB_VOLTAGE:
		if (fe->ops.enable_high_lnb_voltage)
			err = fe->ops.enable_high_lnb_voltage(fe, (long) parg);
		break;

	case FE_SET_FRONTEND: {
		struct dvb_frontend_tune_settings fetunesettings;

		memcpy (&fepriv->parameters, parg,
			sizeof (struct dvb_frontend_parameters));

		memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings));
		memcpy(&fetunesettings.parameters, parg,
		       sizeof (struct dvb_frontend_parameters));

		/* force auto frequency inversion if requested */
		if (dvb_force_auto_inversion) {
			fepriv->parameters.inversion = INVERSION_AUTO;
			fetunesettings.parameters.inversion = INVERSION_AUTO;
		}
		if (fe->ops.info.type == FE_OFDM) {
			/* without hierachical coding code_rate_LP is irrelevant,
			 * so we tolerate the otherwise invalid FEC_NONE setting */
			if (fepriv->parameters.u.ofdm.hierarchy_information == HIERARCHY_NONE &&
			    fepriv->parameters.u.ofdm.code_rate_LP == FEC_NONE)
				fepriv->parameters.u.ofdm.code_rate_LP = FEC_AUTO;
		}

		/* get frontend-specific tuning settings */
		if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) {
			fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000;
			fepriv->max_drift = fetunesettings.max_drift;
			fepriv->step_size = fetunesettings.step_size;
		} else {
			/* default values */
			switch(fe->ops.info.type) {
			case FE_QPSK:
				fepriv->min_delay = HZ/20;
				fepriv->step_size = fepriv->parameters.u.qpsk.symbol_rate / 16000;
				fepriv->max_drift = fepriv->parameters.u.qpsk.symbol_rate / 2000;
				break;

			case FE_QAM:
				fepriv->min_delay = HZ/20;
				fepriv->step_size = 0; /* no zigzag */
				fepriv->max_drift = 0;
				break;

			case FE_OFDM:
				fepriv->min_delay = HZ/20;
				fepriv->step_size = fe->ops.info.frequency_stepsize * 2;
				fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
				break;
			case FE_ATSC:
				fepriv->min_delay = HZ/20;
				fepriv->step_size = 0;
				fepriv->max_drift = 0;
				break;
			}
		}
		if (dvb_override_tune_delay > 0)
			fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;

		fepriv->state = FESTATE_RETUNE;
		dvb_frontend_wakeup(fe);
		dvb_frontend_add_event(fe, 0);
		fepriv->status = 0;
		err = 0;
		break;
	}

	case FE_GET_EVENT:
		err = dvb_frontend_get_event (fe, parg, file->f_flags);
		break;

	case FE_GET_FRONTEND:
		if (fe->ops.get_frontend) {
			memcpy (parg, &fepriv->parameters, sizeof (struct dvb_frontend_parameters));
			err = fe->ops.get_frontend(fe, (struct dvb_frontend_parameters*) parg);
		}
		break;

	case FE_SET_FRONTEND_TUNE_MODE:
		fepriv->tune_mode_flags = (unsigned long) parg;
		err = 0;
		break;
	};

	up (&fepriv->sem);
	return err;
}

static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait)
{
	struct dvb_device *dvbdev = file->private_data;
	struct dvb_frontend *fe = dvbdev->priv;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	dprintk ("%s\n", __FUNCTION__);

	poll_wait (file, &fepriv->events.wait_queue, wait);

	if (fepriv->events.eventw != fepriv->events.eventr)
		return (POLLIN | POLLRDNORM | POLLPRI);

	return 0;
}

static int dvb_frontend_open(struct inode *inode, struct file *file)
{
	struct dvb_device *dvbdev = file->private_data;
	struct dvb_frontend *fe = dvbdev->priv;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	int ret;

	dprintk ("%s\n", __FUNCTION__);

	if ((ret = dvb_generic_open (inode, file)) < 0)
		return ret;

	if ((file->f_flags & O_ACCMODE) != O_RDONLY) {

		/* normal tune mode when opened R/W */
		fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
		fepriv->tone = -1;
		fepriv->voltage = -1;

		ret = dvb_frontend_start (fe);
		if (ret)
			dvb_generic_release (inode, file);

		/*  empty event queue */
		fepriv->events.eventr = fepriv->events.eventw = 0;
	}

	return ret;
}

static int dvb_frontend_release(struct inode *inode, struct file *file)
{
	struct dvb_device *dvbdev = file->private_data;
	struct dvb_frontend *fe = dvbdev->priv;
	struct dvb_frontend_private *fepriv = fe->frontend_priv;

	dprintk ("%s\n", __FUNCTION__);

	if ((file->f_flags & O_ACCMODE) != O_RDONLY)
		fepriv->release_jiffies = jiffies;

	return dvb_generic_release (inode, file);
}

static struct file_operations dvb_frontend_fops = {
	.owner		= THIS_MODULE,
	.ioctl		= dvb_generic_ioctl,
	.poll		= dvb_frontend_poll,
	.open		= dvb_frontend_open,
	.release	= dvb_frontend_release
};

int dvb_register_frontend(struct dvb_adapter* dvb,
			  struct dvb_frontend* fe)
{
	struct dvb_frontend_private *fepriv;
	static const struct dvb_device dvbdev_template = {
		.users = ~0,
		.writers = 1,
		.readers = (~0)-1,
		.fops = &dvb_frontend_fops,
		.kernel_ioctl = dvb_frontend_ioctl
	};

	dprintk ("%s\n", __FUNCTION__);

	if (mutex_lock_interruptible(&frontend_mutex))
		return -ERESTARTSYS;

	fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL);
	if (fe->frontend_priv == NULL) {
		mutex_unlock(&frontend_mutex);
		return -ENOMEM;
	}
	fepriv = fe->frontend_priv;

	init_MUTEX (&fepriv->sem);
	init_waitqueue_head (&fepriv->wait_queue);
	init_waitqueue_head (&fepriv->events.wait_queue);
	init_MUTEX (&fepriv->events.sem);
	fe->dvb = dvb;
	fepriv->inversion = INVERSION_OFF;

	printk ("DVB: registering frontend %i (%s)...\n",
		fe->dvb->num,
		fe->ops.info.name);

	dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template,
			     fe, DVB_DEVICE_FRONTEND);

	mutex_unlock(&frontend_mutex);
	return 0;
}
EXPORT_SYMBOL(dvb_register_frontend);

int dvb_unregister_frontend(struct dvb_frontend* fe)
{
	struct dvb_frontend_private *fepriv = fe->frontend_priv;
	dprintk ("%s\n", __FUNCTION__);

	mutex_lock(&frontend_mutex);
	dvb_unregister_device (fepriv->dvbdev);
	dvb_frontend_stop (fe);

	/* fe is invalid now */
	kfree(fepriv);
	mutex_unlock(&frontend_mutex);
	return 0;
}
EXPORT_SYMBOL(dvb_unregister_frontend);

#ifdef CONFIG_DVB_CORE_ATTACH
void dvb_frontend_detach(struct dvb_frontend* fe)
{
	void *ptr;

	if (fe->ops.release_sec) {
		fe->ops.release_sec(fe);
		symbol_put_addr(fe->ops.release_sec);
	}
	if (fe->ops.tuner_ops.release) {
		fe->ops.tuner_ops.release(fe);
		symbol_put_addr(fe->ops.tuner_ops.release);
	}
	ptr = (void*)fe->ops.release;
	if (ptr) {
		fe->ops.release(fe);
		symbol_put_addr(ptr);
	}
}
#else
void dvb_frontend_detach(struct dvb_frontend* fe)
{
	if (fe->ops.release_sec)
		fe->ops.release_sec(fe);
	if (fe->ops.tuner_ops.release)
		fe->ops.tuner_ops.release(fe);
	if (fe->ops.release)
		fe->ops.release(fe);
}
#endif
EXPORT_SYMBOL(dvb_frontend_detach);