- 06 9月, 2012 3 次提交
-
-
由 Amos Kong 提交于
Convert 'sendkey' to use QAPI. QAPI passes key's index of mapping table to qmp_send_key(), not keycode. So we use help functions to convert key/code to index of key_defs, and 'index' will be converted to 'keycode' inside qmp_send_key(). For qmp, QAPI would check invalid key and raise error. For hmp, invalid key is checked in hmp_send_key(). 'send-key' of QMP doesn't support key in hexadecimal format. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Amos Kong 提交于
Rename 'string' to 'keys', rename 'hold_time' to 'hold-time'. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Amos Kong 提交于
(qemu) sendkey a (qemu) sendkey 0x1e (qemu) sendkey #0x1e unknown key: '#0x1e' The last command doesn't work, '#' is not requested before raw values, and the raw value in decimal format is not supported. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 08 8月, 2012 3 次提交
-
-
由 Orit Wasserman 提交于
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be rounded down to the nearest power of 2). If XBZRLE cache size is too small there will be many cache miss. New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP command to query cache value. Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: NPetter Svard <petters@cs.umu.se> Signed-off-by: NAidan Shribman <aidan.shribman@sap.com> Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Orit Wasserman 提交于
The management can enable/disable a capability for the next migration by using migrate-set-capabilities QMP command. The user can use migrate_set_capability HMP command. Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Orit Wasserman 提交于
The management can query the current migration capabilities using query-migrate-capabilities QMP command. The user can use 'info migrate_capabilities' HMP command. Currently only XBZRLE capability is available. Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 07 8月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
Talk about background operations in general, rather than specifically about streaming. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 14 7月, 2012 1 次提交
-
-
由 Corey Bryant 提交于
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 05 6月, 2012 3 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-By: NLaszlo Ersek <lersek@redhat.com>
-
由 Luiz Capitulino 提交于
This is not a full QAPI conversion, but an intermediate step. In essence, do_netdev_add() is split into three functions: 1. netdev_add(): performs the actual work. This function is fully converted to Error (thus, it's "qapi-friendly") 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is coded by hand and not auto-generated (gen=no in the schema). The reason for this it's a lot easier and simpler to with QemuOpts this way 3. hmp_netdev_add(): HMP front-end. This design was suggested by Paolo Bonzini. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-By: NLaszlo Ersek <lersek@redhat.com>
-
由 Wen Congyang 提交于
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 27 4月, 2012 2 次提交
-
-
由 Stefan Hajnoczi 提交于
Allow streaming operations to be started with an initial speed limit. This eliminates the window of time between starting streaming and issuing block-job-set-speed. Users should use the new optional 'speed' parameter instead so that speed limits are in effect immediately when the job starts. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 20 4月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 10 4月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 15 3月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 12 3月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
Simplify the blockdev-snapshot-sync code and gain failsafe operation by turning it into a wrapper around the new transaction command. A new option is also added matching "mode". Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch adds the system_wakeup monitor command which will simply wake up suspended guests. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 18 2月, 2012 1 次提交
-
-
由 Max Filippov 提交于
Command dumps valid ITLB and DTLB entries. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 26 1月, 2012 3 次提交
-
-
由 Stefan Hajnoczi 提交于
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add block_job_set_speed, which sets the maximum speed for a background block operation. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 18 1月, 2012 5 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 04 1月, 2012 1 次提交
-
-
由 Alexander Graf 提交于
All architectures can now use drive_add on the monitor. This of course does not mean that there is hotplug support for the specific platform, so in order to actually make use of the new drives you still need to have a hotplug capable device. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 06 12月, 2011 12 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Unfortunately, this conversion required an additional change. In the old QMP command, the 'snapshot-file' argument is specified as optional. The idea is to take the snapshot internally if 'snapshot-file' is not passed. However, internal snapshots are not supported yet so the command returns a MissingParamater error if 'snapshot-file' is not passed. Which makes the argument actually required and will cause compatibility breakage if we change that in the future. To fix this the QAPI converted blockdev_snapshot_sync command makes the 'snapshot-file' argument required. Again, in practice it's actually required, so this is not incompatible. If we do implement internal snapshots someday, we'll need a new argument for it. Note that this discussion doesn't affect HMP. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC API, but the new command is a regular synchronous command. There shouldn't be visible differences though, as MONITOR_CMD_ASYNC is internal only. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-