- 12 5月, 2016 9 次提交
-
-
由 Wen Congyang 提交于
In some cases, we want to take a quorum child offline, and take another child online. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NChanglong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-id: 1462865799-19402-2-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
由 Eric Blake 提交于
The block layer has a couple of cases where it can lose Force Unit Access semantics when writing a large block of zeroes, such that the request returns before the zeroes have been guaranteed to land on underlying media. SCSI does not support FUA during WRITESAME(10/16); FUA is only supported if it falls back to WRITE(10/16). But where the underlying device is new enough to not need a fallback, it means that any upper layer request with FUA semantics was silently ignoring BDRV_REQ_FUA. Conversely, NBD has situations where it can support FUA but not ZERO_WRITE; when that happens, the generic block layer fallback to bdrv_driver_pwritev() (or the older bdrv_co_writev() in qemu 2.6) was losing the FUA flag. The problem of losing flags unrelated to ZERO_WRITE has been latent in bdrv_co_do_write_zeroes() since commit aa7bfbff, but back then, it did not matter because there was no FUA flag. It became observable when commit 93f5e6d8 paved the way for flags that can impact correctness, when we should have been using bdrv_co_writev_flags() with modified flags. Compare to commit 9eeb6dd1, which got flag manipulation right in bdrv_co_do_zero_pwritev(). Symptoms: I tested with qemu-io with default writethrough cache (which is supposed to use FUA semantics on every write), and targetted an NBD client connected to a server that intentionally did not advertise NBD_FLAG_SEND_FUA. When doing 'write 0 512', the NBD client sent two operations (NBD_CMD_WRITE then NBD_CMD_FLUSH) to get the fallback FUA semantics; but when doing 'write -z 0 512', the NBD client sent only NBD_CMD_WRITE. The fix is do to a cleanup bdrv_co_flush() at the end of the operation if any step in the middle relied on a BDS that does not natively support FUA for that step (note that we don't need to flush after every operation, if the operation is broken into chunks based on bounce-buffer sizing). Each BDS gains a new flag .supported_zero_flags, which parallels the use of .supported_write_flags but only when accessing a zero write operation (the flags MUST be different, because of SCSI having different semantics based on WRITE vs. WRITESAME; and also because BDRV_REQ_MAY_UNMAP only makes sense on zero writes). Also fix some documentation to describe -ENOTSUP semantics, particularly since iscsi depends on those semantics. Down the road, we may want to add a driver where its .bdrv_co_pwritev() honors all three of BDRV_REQ_FUA, BDRV_REQ_ZERO_WRITE, and BDRV_REQ_MAY_UNMAP, and advertise this via bs->supported_write_flags for blocks opened by that driver; such a driver should NOT supply .bdrv_co_write_zeroes nor .supported_zero_flags. But none of the drivers touched in this patch want to do that (the act of writing zeroes is different enough from normal writes to deserve a second callback). Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Pre-patch, .supported_write_flags lives at the driver level, which means we are blindly declaring that all block devices using a given driver will either equally support FUA, or that we need a fallback at the block layer. But there are drivers where FUA support is a per-block decision: the NBD block driver is dependent on the remote server advertising NBD_FLAG_SEND_FUA (and has fallback code to duplicate the flush that the block layer would do if NBD had not set .supported_write_flags); and the iscsi block driver is dependent on the mode sense bits advertised by the underlying device (and is currently silently ignoring FUA requests if the underlying device does not support FUA). The fix is to make supported flags as a per-BDS option, set during .bdrv_open(). This patch moves the variable and fixes NBD and iscsi to set it only conditionally; later patches will then further simplify the NBD driver to quit duplicating work done at the block layer, as well as tackle the fact that SCSI does not support FUA semantics on WRITESAME(10/16) but only on WRITE(10/16). Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Janne Karhunen 提交于
Vmdk images have metadata to indicate the vmware virtual hardware version image was created/tested to run with. Allow users to specify that version via new 'hwversion' option. [ kwolf: Adjust qemu-iotests common.filter ] Signed-off-by: NJanne Karhunen <Janne.Karhunen@gmail.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
There are no block drivers left that implement the old .bdrv_read/write interface, so it can be removed now. This gets us rid of the corresponding emulation functions, too. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com>
-
由 Kevin Wolf 提交于
Many parts of the block layer are already byte granularity. The block driver interface, however, was still missing an interface that allows making use of this. This patch introduces a new BlockDriver interface, which is based on coroutines, vectored, has flags and uses a byte granularity. This is now the preferred interface for new drivers. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com>
-
由 Kevin Wolf 提交于
It used to be an internal helper function just for implementing bdrv_co_do_readv/writev(), but now that it's a public interface, it deserves a name without "do" in it. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com>
-
由 Paolo Bonzini 提交于
Extract the handling of io_plug "depth" from linux-aio.c and let the main bdrv_drain loop do nothing but wait on I/O. Like the two newly introduced functions, bdrv_io_plug and bdrv_io_unplug now operate on all children. The visit order is now symmetrical between plug and unplug, making it possible for formats to implement plug/unplug. Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Extract the handling of throttling from bdrv_flush_io_queue. These new functions will soon become BdrvChildRole callbacks, as they can be generalized to "beginning of drain" and "end of drain". Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 30 3月, 2016 4 次提交
-
-
由 Kevin Wolf 提交于
This function will allow drivers to implement BDRV_REQ_FUA natively instead of sending a separate flush after the write. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
Whether a write cache is used or not is a decision that concerns the user (e.g. the guest device) rather than the backend. It was already logically part of the BB level as bdrv_move_feature_fields() always kept it on top of the BDS tree; with this patch, the core of it (the actual flag and the additional flushes) is also implemented there. Direct callers of bdrv_open() must pass BDRV_O_CACHE_WB now if bs doesn't have a BlockBackend attached. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Pavel Dovgalyuk 提交于
This patch adds callback for flush request. This callback is responsible for flushing whole block devices stack. bdrv_flush function does not proceed to underlying devices. It should be performed by this callback function, if needed. Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The function is unused since commit f21d96d0 ('block: Use BdrvChild in BlockBackend'). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 17 3月, 2016 4 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
This patch introduces blk_co_preadv() as a central function on the BlockBackend level that is supposed to handle all read requests from the BB to its root BDS eventually. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 14 3月, 2016 1 次提交
-
-
由 Kevin Wolf 提交于
This patch adds an option to the drive_add HMP command to create only a BlockDriverState without a BlockBackend on top. The motivation for this is that libvirt needs to specify options to a migration target (specifically, detect-zeroes). drive-mirror doesn't allow specifying options, and the proper way to do this is to create the target BDS separately with blockdev-add (where you can specify options) and then use blockdev-mirror to that BDS. However, libvirt can't use blockdev-add as long as it is still experimental, and we're expecting that it will still take some time, so we need to resort to drive_add. The problem with drive_add is that so far it always created a BB, and BDSes with a BB can't be used as a mirroring target as long as we don't support multiple BBs per BDS - and while we're working towards that goal, it's another thing that will still take some time. So to achieve the goal, the simplest solution to provide the functionality now without adding one-off options to the mirror QMP commands is to extend drive_add to create nodes without BBs. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 03 2月, 2016 5 次提交
-
-
由 Fam Zheng 提交于
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: NFam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
由 Max Reitz 提交于
As a side effect, we can now make x-blockdev-del's check whether a BDS is actually owned by the monitor explicit. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
We need this list so that bdrv_close_all() can keep track of which BDSs are still open after having removed the BDSs from all of the BBs and having released all monitor BDS references. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
It is unused now, so we can remove it. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Pull out the check whether a block device has a tray from blk_dev_is_tray_open() into its own function so both attributes (whether there is a tray vs. whether that tray is open) can be queried independently. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-id: 1454096953-31773-2-git-send-email-mreitz@redhat.com
-
- 20 1月, 2016 1 次提交
-
-
由 Kevin Wolf 提交于
So far, live migration with shared storage meant that the image is in a not-really-ready don't-touch-me state on the destination while the source is still actively using it, but after completing the migration, the image was fully opened on both sides. This is bad. This patch adds a block driver callback to inactivate images on the source before completing the migration. Inactivation means that it goes to a state as if it was just live migrated to the qemu instance on the source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue either on the source or on the destination, which takes ownership of the image. A typical migration looks like this now with respect to disk images: 1. Destination qemu is started, the image is opened with BDRV_O_INACTIVE. The image is fully opened on the source. 2. Migration is about to complete. The source flushes the image and inactivates it. Now both sides have the image opened with BDRV_O_INACTIVE and are expecting the other side to still modify it. 3. One side (the destination on success) continues and calls bdrv_invalidate_all() in order to take ownership of the image again. This removes BDRV_O_INACTIVE on the resuming side; the flag remains set on the other side. This ensures that the same image isn't written to by both instances (unless both are resumed, but then you get what you deserve). This is important because .bdrv_close for non-BDRV_O_INACTIVE images could write to the image file, which is definitely forbidden while another host is using the image. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com>
-
- 22 12月, 2015 1 次提交
-
-
由 Stefan Hajnoczi 提交于
The maximum number of struct iovec elements depends on the BlockDriverState. The raw-posix and iSCSI protocols have a maximum of IOV_MAX but others could have different values. Cc: Peter Lieven <pl@kamp.de> Suggested-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 18 12月, 2015 6 次提交
-
-
由 Max Reitz 提交于
Add an opaque value which is to be passed to the bdrv_amend_options() status callback. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
bs->options doesn't only contain options that the user explicitly requested, but also option that were derived from flags, the filename or inherited from the parent node. For reopen, it is important to know the difference because reopening the parent can change inherited values in child nodes, but it shouldn't change any options that were explicitly specified for the child. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
Options are not actually inherited from the parent node yet, but this commit lays the grounds for doing so. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com>
-
由 Kevin Wolf 提交于
Some drivers have nested options (e.g. blkdebug rule arrays), which don't belong to a child node and shouldn't be removed. Don't remove all options with "." in their name, but check for the complete prefixes of actually existing child nodes. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
qcow2 accepts a few driver-specific options that overlap semantically (e.g. "overlap-check" is an alias of "overlap-check.template", and any missing cache size option is derived from the given ones). When bdrv_reopen() merges the set of updated options with left out options that should be kept at their old value, we need to consider this and filter out any duplicates (which would generally cause errors because new and old value would contradict each other). This patch adds a .bdrv_join_options callback to BlockDriver and implements it for qcow2. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com>
-
- 17 12月, 2015 1 次提交
-
-
由 Eric Blake 提交于
No need to keep two separate enums, where editing one is likely to forget the other. Now that we can specify a qapi enum prefix, we don't even have to change the bulk of the uses. get_event_by_name() could perhaps be replaced by qapi_enum_parse(), but I left that for another day. CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 12 11月, 2015 5 次提交
-
-
由 John Snow 提交于
Allow a BlockJobTxn to be passed into backup_run, which will allow the job to join a transactional group if present. Propagate this new parameter outward into new QMP helper functions in blockdev.c to allow transaction commands to pass forward their BlockJobTxn object in a forthcoming patch. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1446765200-3054-12-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the image header after a grace period once metadata update has finished. In compliance to the bdrv_drain semantics we should make sure it remains deleted once .bdrv_drain is called. We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy the assertion. Do the "plug" and "flush" calls manually. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Drivers can have internal request sources that generate IO, like the need_check_timer in QED. Since we want quiesced periods that contain nested event loops in block layer, we need to have a way to disable such event sources. Block drivers must implement the "bdrv_drain" callback if it has any internal sources that can generate I/O activity, like a timer or a worker thread (even in a library) that can schedule QEMUBH in an asynchronous callback. Update the comments of bdrv_drain and bdrv_drained_begin accordingly. Like bdrv_requests_pending(), we should consider all the children of bs. Before, the while loop just works, as bdrv_requests_pending() already tracks its children; now we mustn't miss the callback, so recurse down explicitly. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1447064214-29930-9-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Now the callback is not used any more, drop the field along with all implementations in block drivers, which are iscsi and raw. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-8-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
We'll track more request types besides read and write, change the boolean field to an enum. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-2-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 11 11月, 2015 2 次提交
-
-
由 Alberto Garcia 提交于
There are two ways to check for I/O limits in a BlockDriverState: - bs->throttle_state: if this pointer is not NULL, it means that this BDS is member of a throttling group, its ThrottleTimers structure has been initialized and its I/O limits are ready to be applied. - bs->io_limits_enabled: if true it means that the throttle_state pointer is valid _and_ the limits are currently enabled. The latter is used in several places to check whether a BDS has I/O limits configured, but what it really checks is whether requests are being throttled or not. For example, io_limits_enabled can be temporarily set to false in cases like bdrv_read_unthrottled() without otherwise touching the throtting configuration of that BDS. This patch replaces bs->io_limits_enabled with bs->throttle_state in all cases where what we really want to check is the existence of I/O limits, not whether they are currently enabled or not. Signed-off-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
When inserting a BDS tree into a BB, we will need to add the root BDS to this list. Since we will want to do that in the blockdev-insert-medium implementation in blockdev.c, we will need access to it there. This patch is not exactly elegant, but bdrv_states will be removed in the future anyway because we no longer need it since we have BBs. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 24 10月, 2015 1 次提交
-
-
由 Fam Zheng 提交于
The semantics is that after bdrv_drained_begin(bs), bs will not get new external requests until the matching bdrv_drained_end(bs). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-