if the iscsi driver receives a write zeroes request with
the BDRV_REQ_MAY_UNMAP flag set it fails with -ENOTSUP
if the iscsi target does not support WRITE SAME with
UNMAP. However, the BDRV_REQ_MAY_UNMAP is only a hint
and writing zeroes with WRITE SAME will still be
better than falling back to writing zeroes with WRITE16.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some hardware instances do support MSI, so we should do likewise.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

MSI-X support has been fixed in qemu, so we can enable it again.
Signed-off-by: NHannes Reinecke <hare@suse.de>
[Do not change VMSTATE_PCI_DEVICE to PCIE. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Newer firmware implement a LD_LIST_QUERY command, and due to a driver
issue no drives might be detected if this command isn't supported.
So add emulation for this command, too.

Cc: qemu-stable@nongnu.org
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the "scsi-block:" prefix for error messages as suggested
by Markus.

Improve the previous patch by making the message the same for both
scsi-block and scsi-generic, including the strerror() output in both
and making an explicit reference to SG_IO.  Also s/can not/cannot/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

More often it is that bdrv_ioctl fails due to not supported by driver or
whatever reason, in this case we should be specific, because "interface
too old" is very confusing.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

target-alpha queue pull for 20140424

# gpg: Signature made Thu 24 Apr 2014 20:44:23 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found

* remotes/rth/tags/tgt-axp-pull-20140424: (40 commits)
  target-alpha: Remove cpu_unique, cpu_sysval, cpu_usp
  target-alpha: Tidy alpha_translate_init
  target-alpha: Don't issue goto_tb under singlestep
  target-alpha: Use non-local temps for zero/sink
  target-alpha: Use extract to get insn fields
  target-alpha: Convert mfpr/mtpr to source/sink
  target-alpha: Convert gen_cpys et al to source/sink
  target-alpha: Convert gen_fcvtlq/ql to source/sink
  target-alpha: Convert gen_fcmov to source/sink
  target-alpha: Convert gen_bcond to source/sink
  target-alpha: Convert most ieee insns to source/sink
  target-alpha: Convert gen_ieee_input to source/sink
  target-alpha: Convert MVIOP2 to source/sink
  target-alpha: Convert ARITH3 to source/sink
  target-alpha: Convert FARITH3 to source/sink
  target-alpha: Convert FARITH2 to source/sink
  target-alpha: Convert gen_zap/not to source/sink
  target-alpha: Convert gen_ins_h/l to source/sink
  target-alpha: Convert gen_ext_h/l to source/sink
  target-alpha: Convert gen_msk_h/l to source/sink
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Wed 23 Apr 2014 11:02:29 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block/cloop: use PRIu32 format specifier for uint32_t
  vmdk: Fix "%x" to PRIx32 in format strings for cid
  qemu-img: Improve error messages
  qemu-iotests: Check common namespace for id and node-name
  block: Catch duplicate IDs in bdrv_new()
  qemu-img: Avoid duplicate block device IDs
  block: Add errp to bdrv_new()
  convert fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
  block: Remove -errno return value from bdrv_assign_node_name
  curl: Replaced old error handling with error reporting API.
  block: Handle error of bdrv_getlength in bdrv_create_dirty_bitmap
  vmdk: Fix %d and %lld to PRI* in format strings
  block: Check bdrv_getlength() return value in bdrv_make_zero()
  block: Catch integer overflow in bdrv_rw_co()
  block: Limit size to INT_MAX in bdrv_check_byte_request()
  block: Fix nb_sectors check in bdrv_check_byte_request()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: mtp filesharing

# gpg: Signature made Wed 23 Apr 2014 09:28:37 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-5:
  usb: mtp filesharing
  usb: add CompatibleID support to msos
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull tcg 2014-04-22

# gpg: Signature made Tue 22 Apr 2014 22:00:04 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found

* remotes/rth/tags/tcg-next-20140422:
  tcg: Use HOST_WORDS_BIGENDIAN
  tcg: Fix fallback from muls2_i64 to mulu2_i64
  tcg: Use tcg_gen_mulu2_i32 in tcg_gen_muls2_i32
  tcg: Relax requirement for mulu2_i32 on 32-bit hosts
  tcg-s390: Remove W constraint
  tcg-sparc: Use the type parameter to tcg_target_const_match
  tcg-ppc64: Use the type parameter to tcg_target_const_match
  tcg-aarch64: Remove w constraint
  tcg: Add TCGType parameter to tcg_target_const_match
  tcg: Fix out of range shift in deposit optimizations
  tci: Mask shift counts to avoid undefined behavior
  tcg: Mask shift quantities while folding
  tcg: Use "unspecified behavior" for shifts
  tcg: Fix warning (1 bit signed bitfield entry) and replace int by bool
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull for 20140421

# gpg: Signature made Mon 21 Apr 2014 17:57:24 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found

* remotes/rth/tags/tcg-ia64-pull-20140421:
  tcg-ia64: Convert to new ldst opcodes
  tcg-ia64: Move part of softmmu slow path out of line
  tcg-ia64: Convert to new ldst helpers
  tcg-ia64: Reduce code duplication in tcg_out_qemu_ld
  tcg-ia64: Move tlb addend load into tlb read
  tcg-ia64: Move bswap for store into tlb load
  tcg-ia64: Re-bundle the tlb load
  tcg-ia64: Optimize small arguments to exit_tb
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

trivial patches for 2014-04-18

# gpg: Signature made Fri 18 Apr 2014 07:36:15 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-04-18:
  Fix grammar in comment
  doc: grammify "allows to"
  configure: Remove redundant message for -Werror
  scripts: add sample model file for Coverity Scan
  xbzrle.c: Avoid undefined behaviour with signed arithmetic
  int128.h: Avoid undefined behaviours involving signed arithmetic
  hw/ide/ahci.c: Avoid shift left into sign bit
  net: Report error when device / hub combo is not found.
  configure: Fix indentation of help for --enable/disable-debug-info
  qga: trivial fix for unclear documentation of guest-set-time
  vl: Report accelerator not supported for target more nicely
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

PRIu32 is the format string specifier for uint32_t, let's use it.
Variables ->block_size, ->n_blocks, and i are all uint32_t.
Suggested-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Implementation of a USB Media Transfer Device device for easy
filesharing.  Read-only.  No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Previously, when there is a user error in argv parsing, qemu-img prints
help text and exits.

Add an error_exit function to print a helpful error message and a hint
to run 'qemu-img --help' for more information.

As a bonus, "qemu-img <cmd> --help" now has a more reasonable exit code
0.

In the future the help text should be split by sub command, and only
print the information for the specified command.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

A name that is taken by an ID can't be taken by a node-name at the same
time. Check that conflicts are correctly detected.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.

This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

qemu-img used to use "image" as ID for all block devices. This means
that e.g. img_convert() ended up with potentially multiple source images
and one target image, all with the same ID. The next patch will catch
this and fail to open the block device.

This patch makes sure that qemu-img uses meaningful unique IDs for the
block devices it uses.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.

Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This patch converts fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
(error_setg() is part of error reporting API in include/qapi/error.h)
Signed-off-by: NAakriti Gupta <aakritty@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It takes an errp argument. That's enough for error handling.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMaria Kustova <maria.k@catit.be>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_getlength could fail, check the return value before using it.
Return NULL and set errno if it fails. Callers are updated to handle
the error case.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Insanely large requests could cause an integer overflow in
bdrv_rw_co() while converting sectors to bytes. This patch catches the
problem and returns an error (if we hadn't overflown the integer here,
bdrv_check_byte_request() would have rejected the request, so we're not
breaking anything that was supposed to work before).

We actually do have a test case that triggers behaviour where we
accidentally let such a request pass, so that it would return success,
but read 0 bytes instead of the requested 4 GB. It fails now like it
should.

If the vdi block driver wants to be able to deal with huge images, it
can't read the whole block bitmap at once into memory like it does
today, but needs to use a metadata cache like qcow2 does.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 8f4754ed intended to protect against integer overflow bugs in
block drivers by making sure that a single request that is passed to
drivers is no longer than INT_MAX bytes.

However, meanwhile there are some callers that don't use that code path
any more but call bdrv_check_byte_request() directy, so let's add a
check there as well.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

nb_sectors is signed, check for negative values.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Brown Bag sez, don't put the fallback code into the wrong function.
Also, check for muluh_i64 and use tcg_gen_mulu2_i64 instead of raw ops.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Rather than hard-coding use of mulu2_i32, allow muluh_i32.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Instead require either mulu2_i32 or muluh_i32.  The code in tcg-op.h
already supports looking for both.  Previous incomplete conversion?
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Now redundant with the type parameter to tcg_target_const_match.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Now redundant with the type parameter to tcg_target_const_match.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Most 64-bit targets need to be able to ignore the high bits
of a TCG_TYPE_I32 value.
Suggested-by: NStuart Brady <sdb@zubnet.me.uk>
Signed-off-by: NRichard Henderson <rth@twiddle.net>