Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-04-18' into staging

trivial patches for 2014-04-18

# gpg: Signature made Fri 18 Apr 2014 07:36:15 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-04-18:
  Fix grammar in comment
  doc: grammify "allows to"
  configure: Remove redundant message for -Werror
  scripts: add sample model file for Coverity Scan
  xbzrle.c: Avoid undefined behaviour with signed arithmetic
  int128.h: Avoid undefined behaviours involving signed arithmetic
  hw/ide/ahci.c: Avoid shift left into sign bit
  net: Report error when device / hub combo is not found.
  configure: Fix indentation of help for --enable/disable-debug-info
  qga: trivial fix for unclear documentation of guest-set-time
  vl: Report accelerator not supported for target more nicely
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

configure

@@ -1217,8 +1217,8 @@ Advanced options (experts only):
   --enable-modules         enable modules support
   --enable-debug-tcg       enable TCG debugging
   --disable-debug-tcg      disable TCG debugging (default)
-  --enable-debug-info       enable debugging information (default)
-  --disable-debug-info      disable debugging information
+  --enable-debug-info      enable debugging information (default)
+  --disable-debug-info     disable debugging information
   --enable-debug           enable common debug build options
   --enable-sparse          enable sparse checker
   --disable-sparse         disable sparse checker (default)
@@ -4095,7 +4095,6 @@ echo "sparse enabled    $sparse"
 echo "strip binaries    $strip_opt"
 echo "profiler          $profiler"
 echo "static build      $static"
-echo "-Werror enabled   $werror"
 if test "$darwin" = "yes" ; then
     echo "Cocoa support     $cocoa"
 fi

hw/i2c/smbus_eeprom.c

@@ -71,7 +71,7 @@ static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int l
     printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",
            dev->i2c.address, cmd, buf[0]);
 #endif
-    /* An page write operation is not a valid SMBus command.
+    /* A page write operation is not a valid SMBus command.
        It is a block write without a length byte.  Fortunately we
        get the full block anyway.  */
     /* TODO: Should this set the current location?  */

hw/ide/ahci.c

@@ -438,9 +438,9 @@ static void check_cmd(AHCIState *s, int port)
 
     if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) {
         for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) {
-            if ((pr->cmd_issue & (1 << slot)) &&
+            if ((pr->cmd_issue & (1U << slot)) &&
                 !handle_cmd(s, port, slot)) {
-                pr->cmd_issue &= ~(1 << slot);
+                pr->cmd_issue &= ~(1U << slot);
             }
         }
     }

include/qemu/int128.h

@@ -53,7 +53,7 @@ static inline Int128 int128_rshift(Int128 a, int n)
     if (n >= 64) {
         return (Int128) { h, h >> 63 };
     } else {
-        return (Int128) { (a.lo >> n) | (a.hi << (64 - n)), h };
+        return (Int128) { (a.lo >> n) | ((uint64_t)a.hi << (64 - n)), h };
     }
 }
 
@@ -78,7 +78,7 @@ static inline Int128 int128_neg(Int128 a)
 
 static inline Int128 int128_sub(Int128 a, Int128 b)
 {
-    return (Int128){ a.lo - b.lo, a.hi - b.hi - (a.lo < b.lo) };
+    return (Int128){ a.lo - b.lo, (uint64_t)a.hi - b.hi - (a.lo < b.lo) };
 }
 
 static inline bool int128_nonneg(Int128 a)

net/net.c

@@ -952,10 +952,12 @@ void net_host_device_remove(Monitor *mon, const QDict *qdict)
 
     nc = net_hub_find_client_by_name(vlan_id, device);
     if (!nc) {
+        error_report("Host network device '%s' on hub '%d' not found",
+                     device, vlan_id);
         return;
     }
     if (!net_host_check_device(nc->model)) {
-        monitor_printf(mon, "invalid host network device %s\n", device);
+        error_report("invalid host network device '%s'", device);
         return;
     }
     qemu_del_net_client(nc);

qemu-doc.texi

@@ -823,7 +823,7 @@ In this case, the block device must be exported using qemu-nbd:
 qemu-nbd --socket=/tmp/my_socket my_disk.qcow2
 @end example
 
-The use of qemu-nbd allows to share a disk between several guests:
+The use of qemu-nbd allows sharing of a disk between several guests:
 @example
 qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2
 @end example

qemu-options.hx

@@ -444,7 +444,8 @@ This option defines the type of the media: disk or cdrom.
 @item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
 These options have the same definition as they have in @option{-hdachs}.
 @item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
+@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
+(see @option{-snapshot}).
 @item cache=@var{cache}
 @var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
 @item aio=@var{aio}
@@ -1242,7 +1243,7 @@ Disable adaptive encodings. Adaptive encodings are enabled by default.
 An adaptive encoding will try to detect frequently updated screen regions,
 and send updates in these regions using a lossy encoding (like JPEG).
 This can be really helpful to save bandwidth when playing videos. Disabling
-adaptive encodings allows to restore the original static behavior of encodings
+adaptive encodings restores the original static behavior of encodings
 like Tight.
 
 @item share=[allow-exclusive|force-shared|ignore]
@@ -2805,7 +2806,7 @@ UTC or local time, respectively. @code{localtime} is required for correct date i
 MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
 format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
 
-By default the RTC is driven by the host system time. This allows to use the
+By default the RTC is driven by the host system time. This allows using of the
 RTC as accurate reference clock inside the guest, specifically if the host
 time is smoothly following an accurate external reference clock, e.g. via NTP.
 If you want to isolate the guest time from the host, you can set @option{clock}

qga/commands-posix.c

@@ -171,7 +171,7 @@ void qmp_guest_set_time(bool has_time, int64_t time_ns, Error **errp)
     /* Now, if user has passed a time to set and the system time is set, we
      * just need to synchronize the hardware clock. However, if no time was
      * passed, user is requesting the opposite: set the system time from the
-     * hardware clock. */
+     * hardware clock (RTC). */
     pid = fork();
     if (pid == 0) {
         setsid();

qga/qapi-schema.json

@@ -96,8 +96,8 @@
 ##
 # @guest-get-time:
 #
-# Get the information about guest time relative to the Epoch
-# of 1970-01-01 in UTC.
+# Get the information about guest's System Time relative to
+# the Epoch of 1970-01-01 in UTC.
 #
 # Returns: Time in nanoseconds.
 #
@@ -117,11 +117,11 @@
 # gap was, NTP might not be able to resynchronize the
 # guest.
 #
-# This command tries to set guest time to the given value,
-# then sets the Hardware Clock to the current System Time.
-# This will make it easier for a guest to resynchronize
-# without waiting for NTP. If no @time is specified, then
-# the time to set is read from RTC.
+# This command tries to set guest's System Time to the
+# given value, then sets the Hardware Clock (RTC) to the
+# current System Time. This will make it easier for a guest
+# to resynchronize without waiting for NTP. If no @time is
+# specified, then the time to set is read from RTC.
 #
 # @time: #optional time of nanoseconds, relative to the Epoch
 #        of 1970-01-01 in UTC.

scripts/coverity-model.c

+/* Coverity Scan model
+ *
+ * Copyright (C) 2014 Red Hat, Inc.
+ *
+ * Authors:
+ *  Markus Armbruster <armbru@redhat.com>
+ *  Paolo Bonzini <pbonzini@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or, at your
+ * option, any later version.  See the COPYING file in the top-level directory.
+ */
+
+
+/*
+ * This is the source code for our Coverity user model file.  The
+ * purpose of user models is to increase scanning accuracy by explaining
+ * code Coverity can't see (out of tree libraries) or doesn't
+ * sufficiently understand.  Better accuracy means both fewer false
+ * positives and more true defects.  Memory leaks in particular.
+ *
+ * - A model file can't import any header files.  Some built-in primitives are
+ *   available but not wchar_t, NULL etc.
+ * - Modeling doesn't need full structs and typedefs. Rudimentary structs
+ *   and similar types are sufficient.
+ * - An uninitialized local variable signifies that the variable could be
+ *   any value.
+ *
+ * The model file must be uploaded by an admin in the analysis settings of
+ * http://scan.coverity.com/projects/378
+ */
+
+#define NULL ((void *)0)
+
+typedef unsigned char uint8_t;
+typedef char int8_t;
+typedef unsigned int uint32_t;
+typedef int int32_t;
+typedef long ssize_t;
+typedef unsigned long long uint64_t;
+typedef long long int64_t;
+typedef _Bool bool;
+
+/* exec.c */
+
+typedef struct AddressSpace AddressSpace;
+typedef uint64_t hwaddr;
+
+static void __write(uint8_t *buf, ssize_t len)
+{
+    int first, last;
+    __coverity_negative_sink__(len);
+    if (len == 0) return;
+    buf[0] = first;
+    buf[len-1] = last;
+    __coverity_writeall__(buf);
+}
+
+static void __read(uint8_t *buf, ssize_t len)
+{
+    __coverity_negative_sink__(len);
+    if (len == 0) return;
+    int first = buf[0];
+    int last = buf[len-1];
+}
+
+bool address_space_rw(AddressSpace *as, hwaddr addr, uint8_t *buf,
+                      int len, bool is_write)
+{
+    bool result;
+
+    // TODO: investigate impact of treating reads as producing
+    // tainted data, with __coverity_tainted_data_argument__(buf).
+    if (is_write) __write(buf, len); else __read(buf, len);
+
+    return result;
+}
+
+/* Tainting */
+
+typedef struct {} name2keysym_t;
+static int get_keysym(const name2keysym_t *table,
+                      const char *name)
+{
+    int result;
+    if (result > 0) {
+        __coverity_tainted_string_sanitize_content__(name);
+        return result;
+    } else {
+        return 0;
+    }
+}
+
+/* glib memory allocation functions.
+ *
+ * Note that we ignore the fact that g_malloc of 0 bytes returns NULL,
+ * and g_realloc of 0 bytes frees the pointer.
+ *
+ * Modeling this would result in Coverity flagging a lot of memory
+ * allocations as potentially returning NULL, and asking us to check
+ * whether the result of the allocation is NULL or not.  However, the
+ * resulting pointer should never be dereferenced anyway, and in fact
+ * it is not in the vast majority of cases.
+ *
+ * If a dereference did happen, this would suppress a defect report
+ * for an actual null pointer dereference.  But it's too unlikely to
+ * be worth wading through the false positives, and with some luck
+ * we'll get a buffer overflow reported anyway.
+ */
+
+void *malloc(size_t);
+void *calloc(size_t, size_t);
+void *realloc(void *, size_t);
+void free(void *);
+
+void *
+g_malloc(size_t n_bytes)
+{
+    void *mem;
+    __coverity_negative_sink__(n_bytes);
+    mem = malloc(n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void *
+g_malloc0(size_t n_bytes)
+{
+    void *mem;
+    __coverity_negative_sink__(n_bytes);
+    mem = calloc(1, n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void g_free(void *mem)
+{
+    free(mem);
+}
+
+void *g_realloc(void * mem, size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    mem = realloc(mem, n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void *g_try_malloc(size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return malloc(n_bytes == 0 ? 1 : n_bytes);
+}
+
+void *g_try_malloc0(size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return calloc(1, n_bytes == 0 ? 1 : n_bytes);
+}
+
+void *g_try_realloc(void *mem, size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return realloc(mem, n_bytes == 0 ? 1 : n_bytes);
+}
+
+/* Other glib functions */
+
+typedef struct _GIOChannel GIOChannel;
+GIOChannel *g_io_channel_unix_new(int fd)
+{
+    GIOChannel *c = g_malloc0(sizeof(GIOChannel));
+    __coverity_escape__(fd);
+    return c;
+}
+
+void g_assertion_message_expr(const char     *domain,
+                              const char     *file,
+                              int             line,
+                              const char     *func,
+                              const char     *expr)
+{
+    __coverity_panic__();
+}

vl.c

@@ -2740,7 +2740,7 @@ static int configure_accelerator(QEMUMachine *machine)
                 if (!accel_list[i].available()) {
                     printf("%s not supported for this target\n",
                            accel_list[i].name);
-                    continue;
+                    break;
                 }
                 *(accel_list[i].allowed) = true;
                 ret = accel_list[i].init(machine);

xbzrle.c

@@ -28,7 +28,7 @@ int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
 {
     uint32_t zrun_len = 0, nzrun_len = 0;
     int d = 0, i = 0;
-    long res, xor;
+    long res;
     uint8_t *nzrun_start = NULL;
 
     g_assert(!(((uintptr_t)old_buf | (uintptr_t)new_buf | slen) %
@@ -93,9 +93,11 @@ int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
         /* word at a time for speed, use of 32-bit long okay */
         if (!res) {
             /* truncation to 32-bit long okay */
-            long mask = (long)0x0101010101010101ULL;
+            unsigned long mask = (unsigned long)0x0101010101010101ULL;
             while (i < slen) {
-                xor = *(long *)(old_buf + i) ^ *(long *)(new_buf + i);
+                unsigned long xor;
+                xor = *(unsigned long *)(old_buf + i)
+                    ^ *(unsigned long *)(new_buf + i);
                 if ((xor - mask) & ~xor & (mask << 7)) {
                     /* found the end of an nzrun within the current long */
                     while (old_buf[i] != new_buf[i]) {