Support JPS1 little endian block transfer ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Support UA2007 block store ASIs for stfa instructions.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Support UA2007 block load ASIs for ldfa instructions.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

stfa/stdfa/stqfa instructions should raise fp_disabled exceptions
if %pstate.PEF==0 or %fprs.FEF==0.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch implements sparcv9 stfa/stdfa/stqfa instructions
with non block-store ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

ldfa/lddfa/ldqfa instructions should raise fp_disabled exceptions
if %pstate.PEF==0 or %fprs.FEF==0.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch implements sparcv9 ldfa/lddfa/ldqfa instructions
with non block-load ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Andrew Griffiths reports that -runas does not set supplementary group
IDs.  This means that gid 0 (root) is not dropped when switching to an
unprivileged user.

Add an initgroups(3) call to use the -runas user's /etc/groups
membership to update the supplementary group IDs.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This bug was introduced in 94d3f98a:
scsi_cancel_io was checking if some request was pending before trying
to cancel it, while scsi_req_cancel always cancels the request.

This may lead to a crash of Qemu due to dereferencing a NULL pointer,
as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove the include of setjmp.h from the cpu.h of target-alpha
and target-ppc. This is unnecessary because cpu-defs.h already
includes this header; this change brings these two targets
into line with all the rest.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Some versions of png.h cannot be included after setjmp.h,
even when PNG_SKIP_SETJMP_CHECK was defined.

setjmp.h was included from qemu-common.h and is not needed there.
Removing the include statement fixes compilation of ui/vnc-enc-tight.c
with CONFIG_VNC_PNG defined.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Recent compilers look deep into cpu_exec, find longjmp as a noreturn
function and decide to smash some stack variables as they won't be used
again. This may lead to env becoming invalid after return from setjmp,
causing crashes. Fix it by reloading env from cpu_single_env in that
case.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The target-arm frontend's worst-case TCG ops per instr is 194 (and in
general many of the "load multiple registers" ARM instructions generate
more than 100 TCG ops). Raise MAX_OP_PER_INSTR accordingly to avoid
possible buffer overruns.

Since it doesn't make any sense for the "64 bit guest on 32 bit host"
case to have a smaller limit than the normal case, we collapse the
two cases back into each other again.

(This increase costs us about 14K in extra static buffer space and
21K of extra margin at the end of a 32MB codegen buffer.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When calculating the point at which we should not try to put another
TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE
but OPC_BUF_SIZE. This is because the target translate.c will only
stop when an instruction has put it past the OPC_MAX_SIZE limit, so
we have to include the MAX_OP_PER_INSTR margin which that final insn
might have used.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Device code some times needs to access physical memory and does that
through the ld./st._phys functions. However, these are the exact same
functions that the CPU uses to access memory, which means they will
be endianness swapped depending on the target CPU.

However, devices don't know about the CPU's endianness, but instead
access memory directly using their own interface to the memory bus,
so they need some way to read data with their native endianness.

This patch adds _le and _be functions to ld./st._phys.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Just in case there's still a way how a guest can read out buffers when it's not
supposed to, let's zero the buffers during initialisation so that we don't leak
information to the guest.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This fixes https://bugs.launchpad.net/qemu/+bug/786209:

    When the DRQ_STAT bit is set, the IDE core permits both data reads
    and data writes, regardless of whether the current transfer was
    initiated as a read or write.

    This potentially leaks uninitialized host memory into the guest,
    if, before doing anything else to an IDE device, the guest begins a
    write transaction (e.g. WIN_WRITE), but then *reads* from the IO
    port instead of writing to it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

The current message doesn't clearly communicate the error cause.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It needs to be a qdev property, because it belongs to the drive's
guest part.  Precedence: commit a0fef654 and 6ced55a5.

Bonus: info qtree now shows the serial number.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:

ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img

ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.

The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files.  Work around by calling fstat() the ensure the ioctls are
only used on block devices.
Signed-off-by: NJohannes Stezenbach <js@sig21.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-img currently writes disk images using writeback and filling
up the cache buffers which are then flushed by the kernel preventing
other processes from accessing the storage.
This is particularly bad in cluster environments where time-based
algorithms might be in place and accessing the storage within
certain timeouts is critical.
This patch adds the option to choose a cache method when writing
disk images.
Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

People shouldn't explicitly specify host_device any more. raw is doing the
Right Thing.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Parameter 'info' is const, so add the missing attribute.

v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

This bug showed up after 1455084e, and
may be seen only on operating systems *not* using DMA to give commands
to SCSI adapter.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

udivx and sdvix don't modify condition flags, so they shall not
overwrite cpu_cc_*
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'ppc-next' of git://repo.or.cz/qemu/agraf:
  PPC: move TLBs to their own arrays
  PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
  PPC: E500: Use MAS registers instead of internal TLB representation
  PPC: Only set lower 32bits with mtmsr
  PPC: update openbios firmware
  PPC: mpc8544ds: Add hypervisor node
  PPC: calculate kernel,initrd,cmdline locations dynamically
  target-ppc: Handle memory-forced I/O controller access
  PPC: E500: Implement reboot controller

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>