Add some trace events for messages passed between the char layer and the
virtio-serial bus.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Add some trace events for messages passed between the guest and host.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Both the signal thread (via sigwait()) and the cpu thread (via
a normal signal handler) were attempting to catch SIG_IPI.

This resulted in random freezes under Darwin.

This patch separates SIG_IPI from the rest of the signals handled
by the signal thread, because it is independently caught by the cpu
thread.
Signed-off-by: NAlexandre Raymond <cerbere@gmail.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Changes since v1:
- take pthread_sigmask() out of the ifdef as it is now common
to both parts.

This fix effectively blocks, in the main thread, the signals handled
by signalfd or the compatibility signal thread.

This way, such signals are received synchronously in the main thread
through sigfd_handler() instead of triggering the signal handler
directly, asynchronously.
Signed-off-by: NAlexandre Raymond <cerbere@gmail.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Expand the note on the number of TCG ops generated per target insn,
to be clearer about the range of applicability of the 20 op rule
of thumb. Also add a note about the hard MAX_OP_PER_INSTR limit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

setting ELF_HWCAP fixes dynamic library loading for Linux/sparc64
This patch allows loading busybox from Debian 6 initrd
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Translation used incorrectly CPUState fields directly to check
for FPU enable state and 32 bit address masking on Sparc64.

Fix by using TB flags instead.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixed C99 comments on block-tranfer ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Support JPS1 little endian block transfer ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Support UA2007 block store ASIs for stfa instructions.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Support UA2007 block load ASIs for ldfa instructions.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

stfa/stdfa/stqfa instructions should raise fp_disabled exceptions
if %pstate.PEF==0 or %fprs.FEF==0.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch implements sparcv9 stfa/stdfa/stqfa instructions
with non block-store ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

ldfa/lddfa/ldqfa instructions should raise fp_disabled exceptions
if %pstate.PEF==0 or %fprs.FEF==0.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch implements sparcv9 ldfa/lddfa/ldqfa instructions
with non block-load ASIs.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Andrew Griffiths reports that -runas does not set supplementary group
IDs.  This means that gid 0 (root) is not dropped when switching to an
unprivileged user.

Add an initgroups(3) call to use the -runas user's /etc/groups
membership to update the supplementary group IDs.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This bug was introduced in 94d3f98a:
scsi_cancel_io was checking if some request was pending before trying
to cancel it, while scsi_req_cancel always cancels the request.

This may lead to a crash of Qemu due to dereferencing a NULL pointer,
as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove the include of setjmp.h from the cpu.h of target-alpha
and target-ppc. This is unnecessary because cpu-defs.h already
includes this header; this change brings these two targets
into line with all the rest.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Some versions of png.h cannot be included after setjmp.h,
even when PNG_SKIP_SETJMP_CHECK was defined.

setjmp.h was included from qemu-common.h and is not needed there.
Removing the include statement fixes compilation of ui/vnc-enc-tight.c
with CONFIG_VNC_PNG defined.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Recent compilers look deep into cpu_exec, find longjmp as a noreturn
function and decide to smash some stack variables as they won't be used
again. This may lead to env becoming invalid after return from setjmp,
causing crashes. Fix it by reloading env from cpu_single_env in that
case.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The target-arm frontend's worst-case TCG ops per instr is 194 (and in
general many of the "load multiple registers" ARM instructions generate
more than 100 TCG ops). Raise MAX_OP_PER_INSTR accordingly to avoid
possible buffer overruns.

Since it doesn't make any sense for the "64 bit guest on 32 bit host"
case to have a smaller limit than the normal case, we collapse the
two cases back into each other again.

(This increase costs us about 14K in extra static buffer space and
21K of extra margin at the end of a 32MB codegen buffer.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When calculating the point at which we should not try to put another
TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE
but OPC_BUF_SIZE. This is because the target translate.c will only
stop when an instruction has put it past the OPC_MAX_SIZE limit, so
we have to include the MAX_OP_PER_INSTR margin which that final insn
might have used.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Device code some times needs to access physical memory and does that
through the ld./st._phys functions. However, these are the exact same
functions that the CPU uses to access memory, which means they will
be endianness swapped depending on the target CPU.

However, devices don't know about the CPU's endianness, but instead
access memory directly using their own interface to the memory bus,
so they need some way to read data with their native endianness.

This patch adds _le and _be functions to ld./st._phys.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Just in case there's still a way how a guest can read out buffers when it's not
supposed to, let's zero the buffers during initialisation so that we don't leak
information to the guest.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This fixes https://bugs.launchpad.net/qemu/+bug/786209:

    When the DRQ_STAT bit is set, the IDE core permits both data reads
    and data writes, regardless of whether the current transfer was
    initiated as a read or write.

    This potentially leaks uninitialized host memory into the guest,
    if, before doing anything else to an IDE device, the guest begins a
    write transaction (e.g. WIN_WRITE), but then *reads* from the IO
    port instead of writing to it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

The current message doesn't clearly communicate the error cause.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It needs to be a qdev property, because it belongs to the drive's
guest part.  Precedence: commit a0fef654 and 6ced55a5.

Bonus: info qtree now shows the serial number.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:

ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img

ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.

The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files.  Work around by calling fstat() the ensure the ioctls are
only used on block devices.
Signed-off-by: NJohannes Stezenbach <js@sig21.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-img currently writes disk images using writeback and filling
up the cache buffers which are then flushed by the kernel preventing
other processes from accessing the storage.
This is particularly bad in cluster environments where time-based
algorithms might be in place and accessing the storage within
certain timeouts is critical.
This patch adds the option to choose a cache method when writing
disk images.
Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

People shouldn't explicitly specify host_device any more. raw is doing the
Right Thing.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>