This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.

Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)

Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
   a usb-redir device using this chardev:
qemu ... \
  -readconfig docs/ich9-ehci-uhci.cfg \
  -chardev socket,id=usbredirchardev,host=localhost,port=4000 \
  -device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt
occurred also had its IOC bit set, both this bit and Bit 0 are set."

Make UHCI emulation do that.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove leftover calls to usb_hid_changed().

Take care to update the changed flag after delivering a event via
GET_REPORT like we do when sending events via interrupt endpoint.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch implements MMU faults caused by TTE.NFO and TTE.E:
- access other than nonfaulting load to a page marked NFO should
  raise data_access_exception
- nonfaulting load to a page marked with E bit should raise
  data_access_exception

To distinguish nonfaulting loads, this patch extends (abuses?) the rw
argument of get_physical_address_data().  rw is set to 4 on nonfaulting
loads.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Nonfaulting loads should raise fast_data_access_MMU_miss traps as
normal loads do.  It is up to the guest OS kernel that detect MMU misses
on nonfaulting load instructions and make them complete without signaling.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cpu_get_phys_page_nofault() calls get_physical_address() twice,
that results in overwriting the fault status in the SFSR.
We need this change in order for nonfaulting loads to raising MMU faults
as normal loads do.
Also removed the call to cpu_get_physical_page_desc() since we are
going to modify nonfaulting loads raising MMU faults.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Update Sparc32 and Sparc64 OpenBIOS images to SVN revision 1045.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cea5f9a2 exposed bugs in unassigned memory
access handling. Fix them by always passing CPUState to the handlers.
Reported-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.

Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

UA2007 ASI_BLK_* should be added in is_translating_asi().
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

789f88d0 only fixed #else,
fix also #if.
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()

The unpatched code won't compile on mips hosts starting with commit
cea5f9a2.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

"break" is missing on V9 fmovdcc (%icc).
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The destination registers of SIMD signed compare instructions
(fcmp*<16|32>) are not FP registers but general purpose r registers.
Comparisons should be freg_rs1 CMP freg_rs2, that were reversed.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
  target-arm: Minimal implementation of performance counters
  Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
  Revert "target-arm: Use global env in neon_helper.c helpers"
  target-arm: Pass fp status pointer explicitly to neon fp helpers
  target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
  target-arm: Add helper function to generate code to get fpstatus pointer
  Revert "target-arm: Use global env in iwmmxt_helper.c helpers"

Conflicts:
	Makefile.target

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In snapshotting there is no guest involved, so we can safely use a writeback
mode and do the flushes in the right place (i.e. at the very end). This
improves the time that creating/restoring an internal snapshot takes with an
image in writethrough mode.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-img.c wants to count allocated file size of image. Previously it
counts a single bs->file by 'stat' or Window API. As VMDK introduces
multiple file support, the operation becomes format specific with
platform specific meanwhile.

The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls
bdrv_get_allocated_file_size to count the bs. And also added VMDK code
to count his own extents.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Conform coding style in vmdk.c to pass scripts/checkpatch.pl checks.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add create option 'format', with enums:
    monolithicSparse
    monolithicFlat
    twoGbMaxExtentSparse
    twoGbMaxExtentFlat
Each creates a subformat image file. The default is monolithicSparse.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Parse vmdk decriptor file and open mono flat image.
Read/write the flat extent.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The return type of get_cluster_offset was an offset that use 0 to denote
'not allocated', this will be no longer true for flat extents, as we see
flat extent file as a single huge cluster whose offset is 0 and length
is the whole file length.
So now we use int return value, 0 means success and otherwise offset
invalid.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Cid_update is the flag for updating CID on first write after opening the
image. This should be per image open rather than per program life cycle,
so change it from static var of vmdk_write to a field in BDRVVmdkState.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Flush all the file that referenced by the image.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There are several occurrence of magic number 0x200 as the descriptor
offset within mono sparse image file. This is not the case for images
with separate descriptor file. So a field is added to BDRVVmdkState to
hold the correct value.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Separate vmdk_open by subformats to:
* vmdk_open_vmdk3
* vmdk_open_vmdk4
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Probe as the same behavior as VMware does.
Recognize image as monolithicFlat descriptor file when the file is text
and the first effective line (not '#' leaded comment or space line) is
either 'version=1' or 'version=2'. No space or upper case charactors
accepted.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In get_whole_cluster, the offset is not aligned to cluster when reading
from backing_hd. When the first write to child is not at the cluster
boundary, wrong address data from parent is copied to child.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Introduced VmdkExtent array into BDRVVmdkState, enable holding multiple
image extents for multiple file image support.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>