Add some missing #ifdefs to fix compilation failures in the !CONFIG_VNC_JPEG
case introduced by commit ce702e93.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

VirtIOSerialDevice is like VirtIOSerialPort with just the first two
fields, which makes it pretty pointless.  Using VirtIOSerialPort
directly works equally well and is less confusing.

[Amit: - rebase
       - rename 'dev' to 'port' in function params in virtio-serial.h ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add the etags output generated by "make TAGS" and editor backup files
to .gitignore.

This patch has previously appeared in my series of patches to add
pSeries emulation support.  However, it obviously has no real
connection to that, and can be applied seperately.

Please apply.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now use the same algorithm as described in the ARM ARM.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now use the same algorithm as described in the ARM ARM.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These two constants will be used by helper functions such as recpe_f32
and rsqrte_f32.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These constants and utility function are needed to implement some
helpers. Defining constants avoids the need to re-compute them at
runtime.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These special values are needed to implement some helper functions,
which return/use these values in some cases.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SD_STATUS and SEND_NUM_WR_BLOCKS commands are supposed to cause
the card to send data back to the host. However sd.c was missing the
state change to sd_sendingdata_state for these commands, with the effect
that the Linux driver would either hang indefinitely waiting for
nonexistent data (pl181) or read zeroes and provoke a qemu warning
message (omap).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reverse mode is unusable:

	qemu -vnc localhost:5500,reverse

crashes in vnc_refresh_server_surface because some pointers are NULL.

Fix this by calling vnc_dpy_resize (which initializes these pointers)
before calling vnc_refresh.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This option allow to disable adaptive behaviors in some encodings.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The force_jpeg threshold was too low.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Respect client size if it doesn't not support desktop resizing.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Switch to bitmap.h and bitops.h instead of redefining our own bitmap
helpers.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add most used bitmap and bitops functions into bitmap.c and bitops.c.
Theses functions are mostly copied from Linux kernel source.

Some of these functions are already redefined in the VNC server. Some
of them could be used for some block stuff. The yet yo be submitted
NUMA work also need bitmaps.

bitops_ffsl() and bitops_flsl() are here because bitops/bitmap works
on unsigned long, not int, and we can't use current code because:
* ffs only works on int
* qemu_fls only works on int
* ffsl is a GNU extension
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The for loop in send_lossy_rect was totally wrong, and we can't
call vnc_set_bits() because it does not really do what it should.
Use vnc_set_bit() directly instead.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add ZRLE [1] and ZYWRLE [2] encodings. The code is inspire^W stolen
from libvncserver (again), but have been rewriten to match QEMU coding
style.

[1] http://www.realvnc.com/docs/rfbproto.pdf
[2] http://micro-vnc.jp/research/remote_desktop_ng/ZYWRLE/publications/Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These two helpers are needed for zrle and zywrle.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allow to use palette on the stack instead of always
allocating them.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We now that the palette will never have more than 256
elements. Let's use a pool to reduce malloc calls.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the new update frequency infrastructure to use jpeg for regions with
high update frequency.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If an adaptive encoding has choosen to send a lossy update
based on the result of vnc_update_freq(), then it should advertise
it with vnc_sent_lossy_rect(). This will allow to automatically refresh
this rect once it's static again.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch compute the update frequency (in Hz) for each 64x64 rects.
Any adaptive encoding can get this value using vnc_update_freq(), and
switch to a lossy encoding if the value is too high.

The frequency is pre-calculated every 500ms, based on the last 10
updates per 64x64 rect.

If a 64x64 rect was not updated in the last 2 second, then the frequency
became 0, and all the stored timestamp are reseted.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This should not change the current behavior, but if any new
encoding try to use the tight quality, it will always be set
to -1 when lossy encodings are disabled.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

The !use_icount code is the same for iothread and non-iothread,
except that the timeout is different.  Since the timeout might as
well be infinite and is only masking bugs, use the higher value.
With this change the !use_icount code is handled equivalently
in qemu_icount_delta and qemu_calculate_timeout, and we rip it
out of the former.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Remove the typedef SetIRQFunc, as it is not used by anything.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Revert "prep: Disable second IDE channel, as long as ISA IDE emulation doesn't support same irq for both channels"

This reverts commit 491e2a33.

Nothing prevented IRQ sharing on the ISA bus in principle. Not all
boards supported this, neither each and every card nor driver and OS.
Still, there existed valid IRQ sharing scenarios, (at least) two of them
can also be found in QEMU: >2 PC UARTs and the PREP IDE buses.

So remove this artificial restriction from our ISA model.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The following patch adds PS/2 keyboard Scancode Set 3 support.
Signed-off-by: NRoy Tam <roytam@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For Neon shifts by immediate and narrow, correctly handle the case
where the source registers and the destination registers overlap
(the second pass should use the original register contents, not the
results of the first pass).

This includes a refactoring to pull the size check outside the
loop rather than inside, since there is now very little common
code between the size == 3 and size != 3 case.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Pull the code which decodes narrowing operations as being either
signed/unsigned saturate or plain out into its own function.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This implementation is no longer needed.

ffs is either a built-in function (for compilations with optimisation)
or taken from libiberty.a (which was added by the previous patch).

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

libiberty.a is part of MinGW and provides useful functions
like ffs (MinGW) and getopt (MinGW-w64).

It is needed for w64 compilations and allows simpler code for w32.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

RST bit is (1 << 4) bit, not (1 << 3), fix condition
that enables i2s if ENB is set and RST is not set.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add handling of 0xe0xx keycodes to pxa2xx_driver.
Extended keycodes in keymap should be marked with most significant
bit set (i.e. 0x80). Without this patch it's not possible to handle
i.e. cursor keys.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add emulation of KPAS register and proper emulation of
KPASMKP regs, so now driver supports multipresses and properly
works with Linux driver.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NDavid 'Digit' Turner <digit@google.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>