softfloat: move all default NaN definitions to softfloat.h.

These special values are needed to implement some helper functions,
which return/use these values in some cases.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

fpu/softfloat-specialize.h

@@ -30,12 +30,6 @@ these four paragraphs for those parts of this code that are retained.
 
 =============================================================================*/
 
-#if defined(TARGET_MIPS) || defined(TARGET_SH4)
-#define SNAN_BIT_IS_ONE		1
-#else
-#define SNAN_BIT_IS_ONE		0
-#endif
-
 /*----------------------------------------------------------------------------
 | Raises the exceptions specified by `flags'.  Floating-point traps can be
 | defined here if desired.  It is currently not possible for such a trap
@@ -56,17 +50,6 @@ typedef struct {
     bits64 high, low;
 } commonNaNT;
 
-/*----------------------------------------------------------------------------
-| The pattern for a default generated half-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_ARM)
-#define float16_default_nan make_float16(0x7E00)
-#elif SNAN_BIT_IS_ONE
-#define float16_default_nan make_float16(0x7DFF)
-#else
-#define float16_default_nan make_float16(0xFE00)
-#endif
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the half-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -157,19 +140,6 @@ static float16 commonNaNToFloat16(commonNaNT a STATUS_PARAM)
     }
 }
 
-/*----------------------------------------------------------------------------
-| The pattern for a default generated single-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_SPARC)
-#define float32_default_nan make_float32(0x7FFFFFFF)
-#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
-#define float32_default_nan make_float32(0x7FC00000)
-#elif SNAN_BIT_IS_ONE
-#define float32_default_nan make_float32(0x7FBFFFFF)
-#else
-#define float32_default_nan make_float32(0xFFC00000)
-#endif
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the single-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -412,19 +382,6 @@ static float32 propagateFloat32NaN( float32 a, float32 b STATUS_PARAM)
     }
 }
 
-/*----------------------------------------------------------------------------
-| The pattern for a default generated double-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_SPARC)
-#define float64_default_nan make_float64(LIT64( 0x7FFFFFFFFFFFFFFF ))
-#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
-#define float64_default_nan make_float64(LIT64( 0x7FF8000000000000 ))
-#elif SNAN_BIT_IS_ONE
-#define float64_default_nan make_float64(LIT64( 0x7FF7FFFFFFFFFFFF ))
-#else
-#define float64_default_nan make_float64(LIT64( 0xFFF8000000000000 ))
-#endif
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the double-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -563,19 +520,6 @@ static float64 propagateFloat64NaN( float64 a, float64 b STATUS_PARAM)
 
 #ifdef FLOATX80
 
-/*----------------------------------------------------------------------------
-| The pattern for a default generated extended double-precision NaN.  The
-| `high' and `low' values hold the most- and least-significant bits,
-| respectively.
-*----------------------------------------------------------------------------*/
-#if SNAN_BIT_IS_ONE
-#define floatx80_default_nan_high 0x7FFF
-#define floatx80_default_nan_low  LIT64( 0xBFFFFFFFFFFFFFFF )
-#else
-#define floatx80_default_nan_high 0xFFFF
-#define floatx80_default_nan_low  LIT64( 0xC000000000000000 )
-#endif
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the extended double-precision floating-point value `a' is a
 | quiet NaN; otherwise returns 0. This slightly differs from the same
@@ -727,18 +671,6 @@ static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b STATUS_PARAM)
 
 #ifdef FLOAT128
 
-/*----------------------------------------------------------------------------
-| The pattern for a default generated quadruple-precision NaN.  The `high' and
-| `low' values hold the most- and least-significant bits, respectively.
-*----------------------------------------------------------------------------*/
-#if SNAN_BIT_IS_ONE
-#define float128_default_nan_high LIT64( 0x7FFF7FFFFFFFFFFF )
-#define float128_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
-#else
-#define float128_default_nan_high LIT64( 0xFFFF800000000000 )
-#define float128_default_nan_low  LIT64( 0x0000000000000000 )
-#endif
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the quadruple-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.

fpu/softfloat.h

@@ -77,6 +77,12 @@ typedef int64_t sbits64;
 #define LIT64( a ) a##LL
 #define INLINE static inline
 
+#if defined(TARGET_MIPS) || defined(TARGET_SH4)
+#define SNAN_BIT_IS_ONE		1
+#else
+#define SNAN_BIT_IS_ONE		0
+#endif
+
 /*----------------------------------------------------------------------------
 | The macro `FLOATX80' must be defined to enable the extended double-precision
 | floating-point format `floatx80'.  If this macro is not defined, the
@@ -277,6 +283,17 @@ int float16_is_quiet_nan( float16 );
 int float16_is_signaling_nan( float16 );
 float16 float16_maybe_silence_nan( float16 );
 
+/*----------------------------------------------------------------------------
+| The pattern for a default generated half-precision NaN.
+*----------------------------------------------------------------------------*/
+#if defined(TARGET_ARM)
+#define float16_default_nan make_float16(0x7E00)
+#elif SNAN_BIT_IS_ONE
+#define float16_default_nan make_float16(0x7DFF)
+#else
+#define float16_default_nan make_float16(0xFE00)
+#endif
+
 /*----------------------------------------------------------------------------
 | Software IEC/IEEE single-precision conversion routines.
 *----------------------------------------------------------------------------*/
@@ -366,6 +383,20 @@ INLINE int float32_is_zero_or_denormal(float32 a)
 #define float32_one make_float32(0x3f800000)
 #define float32_ln2 make_float32(0x3f317218)
 
+
+/*----------------------------------------------------------------------------
+| The pattern for a default generated single-precision NaN.
+*----------------------------------------------------------------------------*/
+#if defined(TARGET_SPARC)
+#define float32_default_nan make_float32(0x7FFFFFFF)
+#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
+#define float32_default_nan make_float32(0x7FC00000)
+#elif SNAN_BIT_IS_ONE
+#define float32_default_nan make_float32(0x7FBFFFFF)
+#else
+#define float32_default_nan make_float32(0xFFC00000)
+#endif
+
 /*----------------------------------------------------------------------------
 | Software IEC/IEEE double-precision conversion routines.
 *----------------------------------------------------------------------------*/
@@ -452,6 +483,19 @@ INLINE int float64_is_any_nan(float64 a)
 #define float64_one make_float64(0x3ff0000000000000LL)
 #define float64_ln2 make_float64(0x3fe62e42fefa39efLL)
 
+/*----------------------------------------------------------------------------
+| The pattern for a default generated double-precision NaN.
+*----------------------------------------------------------------------------*/
+#if defined(TARGET_SPARC)
+#define float64_default_nan make_float64(LIT64( 0x7FFFFFFFFFFFFFFF ))
+#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
+#define float64_default_nan make_float64(LIT64( 0x7FF8000000000000 ))
+#elif SNAN_BIT_IS_ONE
+#define float64_default_nan make_float64(LIT64( 0x7FF7FFFFFFFFFFFF ))
+#else
+#define float64_default_nan make_float64(LIT64( 0xFFF8000000000000 ))
+#endif
+
 #ifdef FLOATX80
 
 /*----------------------------------------------------------------------------
@@ -520,6 +564,19 @@ INLINE int floatx80_is_any_nan(floatx80 a)
     return ((a.high & 0x7fff) == 0x7fff) && (a.low<<1);
 }
 
+/*----------------------------------------------------------------------------
+| The pattern for a default generated extended double-precision NaN.  The
+| `high' and `low' values hold the most- and least-significant bits,
+| respectively.
+*----------------------------------------------------------------------------*/
+#if SNAN_BIT_IS_ONE
+#define floatx80_default_nan_high 0x7FFF
+#define floatx80_default_nan_low  LIT64( 0xBFFFFFFFFFFFFFFF )
+#else
+#define floatx80_default_nan_high 0xFFFF
+#define floatx80_default_nan_low  LIT64( 0xC000000000000000 )
+#endif
+
 #endif
 
 #ifdef FLOAT128
@@ -593,6 +650,18 @@ INLINE int float128_is_any_nan(float128 a)
         ((a.low != 0) || ((a.high & 0xffffffffffffLL) != 0));
 }
 
+/*----------------------------------------------------------------------------
+| The pattern for a default generated quadruple-precision NaN.  The `high' and
+| `low' values hold the most- and least-significant bits, respectively.
+*----------------------------------------------------------------------------*/
+#if SNAN_BIT_IS_ONE
+#define float128_default_nan_high LIT64( 0x7FFF7FFFFFFFFFFF )
+#define float128_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
+#else
+#define float128_default_nan_high LIT64( 0xFFFF800000000000 )
+#define float128_default_nan_low  LIT64( 0x0000000000000000 )
+#endif
+
 #endif
 
 #else /* CONFIG_SOFTFLOAT */