this patch adds some more defines from linux/pci_regs.h to
hw/pci.h. There is now no longer a need to define them in
eepro100.c, so they were removed there.

Some defines from linux/pci_regs.h had similar, but not
the same defines in hw/pci.h (PCI_REVISION_ID / PCI_REVISION,
PCI_SUBSYSTEM_VENDOR_ID / PCI_SUBVENDOR_ID,
PCI_SUBSYSTEM_ID / PCI_SUBDEVICE_ID).

I suggest to use the "standard" from linux/pci_regs.h and
replace the "old" Qemu ones. To facilitate the migration,
my patch does not remove the old defines but marks them
as obsolete. After a migration to the "standard" defines,
pci.h could use linux/pci_regs.h which is far more complete.

The patch is needed for an updated maintainer version of
hw/eepro100.c which I'd like to see in Qemu stable.

 * Remove declarations already declared in header file from eepro100.c
 * Add missing declarations from pci_regs.h to pci.h
 * Mark "non-standard" declarations in pci.h as obsolete
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6901 c046a42c-6fe2-441c-8c8c-71466251a162

starting with r6839, the monitor command 'screendump'
raises a nullpointer memory access which crashs Qemu.

Fix crash when calling screendump from monitor.

This was a regression introduced with r6839:
DisplayAllocator interface (Stefano Stabellini)
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6900 c046a42c-6fe2-441c-8c8c-71466251a162

All archs have some kind of firmware to load and can be fine with it
already. So there is not much use in enforcing the presence of a disk.
If the system setup requires one, the user will notice it anyway once
the firmware/bios fails to boot from it.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6899 c046a42c-6fe2-441c-8c8c-71466251a162

Pass correct DisplayState field to is_surface_bgr().
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6898 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6897 c046a42c-6fe2-441c-8c8c-71466251a162

This patch increases by 50 % the size available for option roms.
The main motivator is that some roms grew bigger than the 64k we
currently allocate for them (Hey, it's 2009!)

One example is the gpxe project, that produces some roms with 69k,
70k, etc. The space proposed by this patch actually makes it as
big as 84k. Probably still a fit for some time.

But there is no free lunch. This space must come from somewhere,
and we take it from vga rom space. Currently, our vga roms are
around 35k in size. With this patch, option rom space will begin
just after vga ends, aligned to the next 2k boundary.

Technicaly, we could do the same with the uper space (the bios itself),
but since bochs bios is already 128 k in size, I don't see an
urgent need to do it.

[ fix case for vgabioses smaller than 30k, by Carl-Daniel Hailfinger ]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6896 c046a42c-6fe2-441c-8c8c-71466251a162

Okay, I started looking into how to handle scsi-generic I/O in the
new world order.

I think the best is to use the SG_IO ioctl instead of the read/write
interface as that allows us to support scsi passthrough on disk/cdrom
devices, too.  See Hannes patch on the kvm list from August for an
example.

Now that we always do ioctls we don't need another abstraction than
bdrv_ioctl for the synchronous requests for now, and for asynchronous
requests I've added a aio_ioctl abstraction keeping it simple.

Long-term we might want to move the ops to a higher-level abstraction
and let the low-level code fill out the request header, but I'm lazy
enough to leave that to the people trying to support scsi-passthrough
on a non-Linux OS.

Tested lightly by issuing various sg_ commands from sg3-utils in a guest
to a host CDROM device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6895 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NRobert Reif <reif@earthlink.net>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6894 c046a42c-6fe2-441c-8c8c-71466251a162

The block layer may signal an immediate error on an asynchronous request
by returning NULL.  The DMA API did not handle this correctly, returning
an AIO request which would never complete (and which would crash if
cancelled).

Fix by detecting the failure and propagating it.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6893 c046a42c-6fe2-441c-8c8c-71466251a162

If a bounced vectored aio fails immediately (the inner aio submission
returning NULL) then the bounce handler erronously returns an aio
request which will never be completed (and which crashes when cancelled).

Fix by detecting that the inner request has failed and propagating the
error.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6892 c046a42c-6fe2-441c-8c8c-71466251a162

There is no need to check for valid prefixes on the the device name
when removing it. If the device name is found on the vlan client list,
it can be removed, regardless of the prefix used on its name.

To reproduce the bug, just run this on the monitor:

 (qemu) host_net_add user name=foobar
 (qemu) host_net_remove 0 foobar
 invalid host network device foobar
 (qemu)
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6891 c046a42c-6fe2-441c-8c8c-71466251a162

This improves physical cdrom support on FreeBSD hosts to be almost as
good as on Linux, with the only notable exception that you still need to
either have the guest itself eject the disc if you want to take it
out/change it, or do a change command in the monitor after taking out
a disc in case a guest cannot eject it itself - otherwise the guest may
continue using state (like size) of the old disc.
Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6888 c046a42c-6fe2-441c-8c8c-71466251a162

vl.c calls dma_helper_init, so it needs to include dma.h to get a
definition for it, otherwise we get compiler warnings like:

/home/hch/work/qemu/vl.c: In function 'main':
/home/hch/work/qemu/vl.c:5518: warning: implicit declaration of function 'dma_helper_init'
Signed-off-by: NChristoph Hellwig <hch@lst.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6887 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6886 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6885 c046a42c-6fe2-441c-8c8c-71466251a162

Try to keep documentation about command line switches, -help text and
qemu_options table synchronized. 

In true Qemu tradition, an include file is generated from single .hx file
containing all relevant information in one place. The include file is
parsed once for getting the enums, another time for getopt tables and
hird time for help messages. Texi documentation for the options is
generated from the same .hx file.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6884 c046a42c-6fe2-441c-8c8c-71466251a162

In r6839 ("DisplayAllocator interface") the "width" and "height" globals
stopped ever being assigned.  Note that last time absolute input stopped
working was for the same reason.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6875 c046a42c-6fe2-441c-8c8c-71466251a162

Use the dedicated dma aiocb to store intermediate state for dma block
transactions.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6874 c046a42c-6fe2-441c-8c8c-71466251a162

Now that we have a dedicated acb pool for vector translation acbs, we can
store the vector translation state in the acbs instead of in an external
structure.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6873 c046a42c-6fe2-441c-8c8c-71466251a162

Move the dma helpers to a private aio pool, and implement a cancellation
method for them.  Should prevent issues when cancelling I/O while dma is
in progress.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6872 c046a42c-6fe2-441c-8c8c-71466251a162

This allows us to remove a hack in the vectored aio cancellation code.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6871 c046a42c-6fe2-441c-8c8c-71466251a162

Move the AIOCB allocation code to use a dedicate structure, AIOPool.  AIOCB
specific information, such as the AIOCB size and cancellation routine, is
moved into the pool.

At present, there is exactly one pool per block format driver, maintaining
the status quo.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6870 c046a42c-6fe2-441c-8c8c-71466251a162

There may be cases where the guest does not want the avail queue
interrupt, even when it's empty.  For the virtio-net case, the
guest may use a different buffering scheme or decide polling for
used buffers is more efficient.  This can be accomplished by simply
checking for whether the guest has acknowledged the existing notify
on empty flag.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6865 c046a42c-6fe2-441c-8c8c-71466251a162

The RXDMT0 interrupt is supposed to fire when the number of free
RX descriptors drops to some fraction of the total descriptors.
However in practice, it seems like we're adding this interrupt
cause on every RX.  Fix the logic to treat (tail - head) as the
number of free entries rather than the number of used entries.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6864 c046a42c-6fe2-441c-8c8c-71466251a162

According to the Intel specs, lsl performs a check against NULL for the
provided selector, just like lar does. helper_lar() includes the
corresponding code, helper_lsl() was lacking it so far.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6863 c046a42c-6fe2-441c-8c8c-71466251a162

This patch makes the vnc server code skip screen refreshes in case
there is data in the output buffer.  This reduces the refresh rate to
throttle the bandwidth needed in case the network link is saturated.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6862 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6861 c046a42c-6fe2-441c-8c8c-71466251a162

This patch killes the old_data hack in the qemu server and replaces
it with a clean separation of the guest-visible display surface and
the vnc server display surface.  Both guest and server surface have
their own dirty bitmap for tracking screen updates.

Workflow is this:

(1) The guest writes to the guest surface.  With shared buffers being
    active the guest writes are directly visible to the vnc server code.
    Note that this may happen in parallel to the vnc server code running
    (today only in xenfb, once we have vcpu threads in qemu also for
    other display adapters).

(2) vnc_update() callback tags the specified area in the guest dirty
    map.

(3) vnc_update_client() will first walk through the guest dirty map.  It
    will compare guest and server surface for all regions tagged dirty
    and in case the screen content really did change the server surface
    and dirty map are updated.
    Note: old code used old_data in a simliar way, so this does *not*
    introduce an extra memcpy.

(4) Then vnc_update_cient() will send the updates to the vnc client
    using the server surface and dirty map.
    Note: old code used the guest-visible surface instead, causing
    screen corruption in case of guest screen updates running in
    parallel.

The separate dirty bitmap also has the nice effect that forced screen
updates can be done cleanly by simply tagging the area in both guest and
server dirty map.  The old, hackish way was memset(old_data, 42, size)
to trick the code checking for screen changes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6860 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6859 c046a42c-6fe2-441c-8c8c-71466251a162

Thanks to Robert Riebisch for bisection

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6858 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6857 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6856 c046a42c-6fe2-441c-8c8c-71466251a162

Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.

So x86_64 can run i386 code easily and ppc64 can run ppc code.

Unfortunately, the current checks are pretty strict. So you can only
load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.

This can get really annoying. I first encountered this issue with
my multiboot patch, where qemu-system-x86_64 was unable to load an
i386 elf binary because the elf loader rejected it.

The same thing happened again on PPC64 now. The firmware we're loading
is a PPC32 elf binary, as it's shared with PPC32. But the platform is
PPC64.

Right now there is a hack for this in the ppc cpu.h definition, that
simply sets the type to PPC32 in system emulation mode. While that
works fine for the firmware, it's no good if you also want to load a
PPC64 kernel with -kernel.

So in order to solve this mess, I figured the easiest way is to make
the elf loader aware of platforms that are backwards compatible. For
now I was only sure that x86_64 does i386 and ppc64 does ppc32, but
maybe there are other combinations too.

This patch is a prerequisite for having a working -kernel option on
PPC64.
Signed-off-by: NAlexander Graf <alex@csgraf.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6855 c046a42c-6fe2-441c-8c8c-71466251a162

A pci config write may remap the vga linear frame buffer, confusing the
memory slot dirty logging logic.

Fixed Windows with -vga std.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Sigend-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6852 c046a42c-6fe2-441c-8c8c-71466251a162

Otherwise, slot tracking gets confused.

This fixes a screen corruption bug with Ubuntu guest installation.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6851 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6850 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6849 c046a42c-6fe2-441c-8c8c-71466251a162

When checking that the size of the control virtqueue return field
is sufficient, use the correct sg list.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6845 c046a42c-6fe2-441c-8c8c-71466251a162

With hotplug nd_table might contain holes.

Noticed by Eduardo Habkost.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6844 c046a42c-6fe2-441c-8c8c-71466251a162

As previously discussed, this patch removes the non-portable use of
asprintf(), replacing it with malloc+snprintf instead
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6843 c046a42c-6fe2-441c-8c8c-71466251a162